1 / 19

AME 441: Conceptual Design Presentation

AME 441: Conceptual Design Presentation. B-19. Group 5: Andrea Doyle, Tim Kacmar, Ryan Kirker, Meghan Perry-Eaton, Denis Sullivan, Mike Trela, Thomas Zieg. February 5, 2004. Overview. Introduction Main Wing Selection Engine Selection Takeoff and Landing Distances

iniko
Download Presentation

AME 441: Conceptual Design Presentation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. AME 441: Conceptual Design Presentation B-19 Group 5: Andrea Doyle, Tim Kacmar, Ryan Kirker, Meghan Perry-Eaton, Denis Sullivan, Mike Trela, Thomas Zieg February 5, 2004

  2. Overview • Introduction • Main Wing Selection • Engine Selection • Takeoff and Landing Distances • Passive Lift Enhancement • Static Stability • Conclusions

  3. Introduction • Design Drivers • Maximum Level Speed at Constant Altitude • Maximum Climb Rate • Allowable Parameters • Total Planform Area between 400 and 800 in2 • Power Plant Consisting of an Electric Motor • Internal Cargo Bay of Specified Dimensions • Sport Propeller of Specific Pitch and Diameter • Digital Radio Control System (7 Channels)

  4. Why a Flying Wing? • Advantages • Minimum Drag • High Speed • Absence of Horizontal Tail Maximizes Climb Rate Given AC and CG locations • Maximizing Excess Power

  5. Weight Breakdown

  6. Wing Loading • Design Drivers: • Max Level Cruise  High Wing Loading • Max Rate of Climb  Low Wing Loading • Large aircraft are not a good comparison. • R/C Model Aircraft Wing Loading • Professional Kit Models: 12 oz/ft2. • Conceptual Design: 27 oz/ft2. • Maximize Available Power, Decrease Drag

  7. Overall Wing Design • Taper Ratio, 0.4 – Like Elliptical Planform • Wing Sweep, 20% – Historical Data • Winglets – Decrease Drag, Stability • Dihedral, none • Winglets & Wing Sweep are effective Dihedral • Twist takes away from effective Dihedral

  8. Wing Airfoil Section: EH 3.0/12.0 • Low Moment about A.C. • -0.002 • Thick Section • Structure • Stability • Designed for Flying Wing model Aircrafts

  9. Wing Specifics • Flaps for increase lift at take off and acceleration to cruise. • Dimensions • Wing Area, 600 sq. in. • Compromise between low drag and low CL. • Wing Span, 5.4 ft • A = 7.1, 8.1 with winglets • Root Chord, 1.09 ft & Tip Chord .44 ft • CL @ cruise, .225

  10. Estimated Cruise Velocity Importance • Velocity estimation greatly effects the design of the wing.

  11. Estimated Velocity • Theoretical Estimate: 100 ft/s • Based on a propeller efficiency ranging from .4 to .6 • Conservative Estimate: 80 ft/s • Battery will not be fully charged and other losses will occur.

  12. Wing Twist & Angle of Attack • Twist: For Stability & Control of Aircraft • Minimize Moment @ A.C. • Low Stability Factor, 8% • Longer Wing Span • Good Weight Estimate • Calculated -4° of Twist from Root to Chord • Root Chord, α = 4 ° • Tip Chord, α = 0 ° • Mean Aerodynamic Chord, α = 2.5° • .817 ft long at 1 ft from the root chord.

  13. Propulsion System • Astro 15 Motor • 12” X 8” Pitch Propeller • 9.78 lbs. Static Thrust • 2.16 lbs. Cruise Thrust (2 lbs. of Drag at Cruise)

  14. Take-Off and Landing Analysis • CDO= 0.015 • Aspect Ratio=7.15 • CLG=1 • Take-off Weight= 8lb • =0.1, wet grass • 5 foot obstacle • Wing Loading= 1.687 lb/ft2 • VTD= 43.34 ft/sec • Landing Weight= 7lb • Dropped landing gears • =0.3, wet grass, large surface area interaction with ground

  15. Lift Enhancement • Airfoil Data • EH3.0-12.0 • Cl max = 1.0 • αs 2-D no flaps = 10 degrees • CLmax no flaps = 0.90 • αs 3-D no flaps = 13.129 degrees • Flap Information • Plane • δf = 30 degrees • Sf/Sw = 0.20 • cf/cw = 0.25 • 3-D with flaps • ΔCLmax = 0.0189 • CLmax = 0.9189 • αs 3-D flapped = 11.629 degrees • ΔCD0 = 0.0156

  16. Stability

  17. Conclusions • Flying Wing Configuration • Estimated 8 lb Takeoff Weight • Wing Dimensions • Area: 597 in2 • Span: 4.7 ft • Root Chord: 1.08 in Tip Chord: .44 in • Wing Twist: 5° • EH 3.0-12.0 Airfoil • Cl max-1.0 • 3% Camber • 12 % Thickness • Wing Loading • 27 oz/ft2

  18. PowerPlant • Astro Cobalt 15 Electric Motor -Shaft Output Power: 268 W -12 Cell Pack -2.38:1 Gear Ratio -12x8 Propeller • Takeoff and Landing • Takeoff Speed: 48.34 ft/s • Takeoff Distance: 248.57 ft • Landing Distance: 743.12 ft • Flap Information • Plane • Δf = 30 degrees • Sf/Sw = 0.20 • cf/cw = 0.25 • Cruise Speed • 80 ft/s

  19. Questions??

More Related