Download
1 / 52
530 likes | 724 Views
Introduction to NComputing Siam Network & Computer Co., Ltd. Dell Corporation (Thailand) Co., Ltd. Agenda. Agenda. NComputing & SNC Company background What is “Multi User Computing”? Product Overview L Series X Series Management Software
E N D
Introduction to NComputingSiam Network & ComputerCo., Ltd.Dell Corporation (Thailand) Co., Ltd.
Agenda Agenda • NComputing & SNC Company background • What is “Multi User Computing”? • Product Overview L Series X Series Management Software • Basic Setting L-Series & NCT-2000 XP Console • Basic Setting X-Series & NCX-2000 XP Console • Advance Setting X&L-Series • Setting NControl • FAQ • Q&A
NComputing Background • Our Vision: • Our Solution: Enables a single PC to be used by multiple users at once: • It is simple to create, low cost, easy to maintain, eco friendly and will dramatically lower computing costs Expand Access & Dramatically Lower Computing Costs Through Multi-User Computing • Our Success:We are the fastest growing “Multi-User Computing” company in the world with over three hundred thousand units deployed in over 80 countries
SNC Background Siam Network and Computer founded in 1999 with professional team for network implement in corporate and government 2004 SNC was a partnership with Ncomputing to distribute terminal unit computing in NComputing brand SNC Best Performance Award 2005 from NComputing
What is “Multi User Computing”? NComputing is a terminal unit that does not require CPU , hard-drive, or CD-Rom. With the exclusive UTMA (Ultra Thin Multi-Access) technology, User have the ability to expand PC up to 10 computer terminals costs less than a traditional PC.
Capacity of the average CPU is under-utilized (using less than 10%!) < CPU meter > The IdeaShare excess computing resource and redistribute Turn 1 PC to 30 Virtual PCs
1 3 NComputing Terminal Server S/W onHost Computer 2 NComputing unique SoC based Access Terminal • Lowest cost and slim • Faster and silent • Easy to expand, install • Less Power (< 5W) • Various form factors • No embedded OS • Smart Boot loader built-in • Proprietary Terminal Service Software • Runs on ordinary PC • Supports any Operating System • Including Windows XP, Linux OS • not only Server OS. Desktop Streaming Protocol • NComputing’s UXP (User eXtension Protocol) • Secure and faster than RDP • Optimized for fast screen refresh • Flexible to customize NComputing SolutionAll-inclusive Multi-User Computing technology
Product Overview • X-Series: • Up to 7 users can share one PC • Direct connection via UTP cable (10 m / 33 ft) • X300 kit includes: • 1 PCI card with 3 ports • 3 access terminals • Terminal services software PCI-based • L-Series: • Up to 30 users can share one PC • Ethernet connection over any distance • Each L Series access terminal includes: • 1 access terminal • Terminal services software Ethernet-Based • Management Software: • NControl: monitor/remote control 128 sessions
NComputing X Series • Most popular solution for schools • Just less than ฿4,000 per seat to add users to PC • Hardwired connection up to 33 feet • Up to 3 users per PCI card • Max of 7 users per PC • Terminal services software on host PC enables simultaneous sharing and management of student sessions • Access terminal connections: • VGA (up to 1024x768 resolution) • Keyboard • Mouse • Speaker output • No separate power input required (supplied by PC through CAT 5 cable) • USB ports on host PC can be assigned to individual users
NComputing X Series Note: Four users can share a PC running with one X300 kit. Seven users can share with two X300 kits.
NComputing L Series • Flexible Ethernet connection enables any distance between host PC and users • Terminal services software on host PC enables simultaneous sharing and management of sessions • Up to 10 users on desktop OS • Up to 30 users on server OS (Windows 2003 Server or Linux) • Access terminal connections: • VGA (up to 1440x900 resolution) • MIC Port (L230 only) • USB Flash Drive Port (L230 only) • PS/2 keyboard • PS/2 mouse • Speaker output • DC Power input (~5 Watts)
Setting L Series • “Full” Windows XP or Linux Desktop user experience • Up to 10 users can share a PC running a desktop OS and up 30 users can share if the host hardware is running Windows 2003 Server or Linux • Cost INCLUDING terminal services software • Deploy within 1 hour. Can use existing imaging tools, policies, etc. • Integrates within existing PC management process • Stateless Design: No data at desktop, no embedded OS • High Security – Flash memory ports are optional and can be turned off
NComputing L Series New Model L130 L230 PS/2 Keyboard and Mouse Speaker USB Memory* RJ-45 VGA Power On/Off Microphone* (Common to both the L130 & L230) (*L230 Only)
NComputing L Series • Notes: • *16-bit Only in the L130 (24-bit in the L230) • ^ NComputing Linux terminal services currently does not support USB • LTS 2.0 Linux support for SUSE 10.2, Fedora 6 and Ubuntu 7.04 for the L130/L230 only • Additional software licenses may be required by the software licensors. Please check your software user license agreements to ensure your continued compliance with such agreements.
NControl Enables Remote Control and Administration • Control Mode • Remotely monitor and control the keyboard, mouse and screen of any student to collaborate • Block a student from access to ensure attention (screen is blanked and keyboard/mouse are disabled) • Remote logoff, restart, or shutdown • Remote updates and installation of software • Students can be in multiple locations/tele-learning • Presentation Mode • Broadcast the teacher’s screen activities to one or more students • Broadcast one student’s screen to a group of students • FTP Mode • Distribute to and collect files from student computers
Setting X Series Step 2: Connect access terminal to the employee’s monitor and peripherals Step 1: Install PCI card into the Host PC Step 4: Install NComputing software on Host PC directly or via imaging software (like Ghost) Step 3: Connect access terminal to the PCI card via standard cable
NCX-Console Show session log on this host
NCX-Console Click Insert message
NCX-Console Click Click “Yes” want stop session Click ”No” want cancel stop session
NCX-Console Insert delay time when shutdown (seconds)
NCX-Console Select allow or not every session can shutdown
NCX-Console Select resolution on x300 box
L Series Installs in Just 3 Easy Steps Step 3: Install NComputing software on Host PC directly or via imaging software (like Ghost) Step 1: Connect L Series access terminal to the employee monitor/mouse/keyboard Step 2: Connect terminal to the network
Setting L-Series Box select whether to use a dynamic IP address or a static IP address.
Setting L-Series Box Autodetection : No specified server network address. TS 2,TS 3:field where you set a host PC IP address. User name : insert user for Windows log in Programs :You can make the desktop come up, or a program that is specified Desktop size: You can set the resolution, color depth, and frequency.
Setting L-Series Box "Password" : protecting the access terminal options with a password.
Using the management console Show user log on
Using the management console Select for view screen or control client Click right bottom on mouse
Using the management console Version of NCT-2000-XP
Using the management console Insert delay time when shutdown (seconds)
Using the management console Clear session auto when disconnect (minutes)
Using the management console Select client Disable for select master or client use USB on Host-PC
Using the management console Setting Hardware Click for setting client Select client
Using the management console Edit MAC Address
Using the management console Insert data of user Enable for auto logon
Master Console Main window containing all other windows List of help messages and finally ObservedPCs/ Workplaces List of not observed just active PCs/Workplace Ncontrol Groups
NControl : Create Group Insert group name
NControl : Add Client to Group Select group Add client to group
