1 / 27

AMP 101

The AMP 101 310 Series Inline End Suction Pumps offer a wide selection of models with 2" to 14" discharge, flows up to 9,000 GPM, and heads up to 450 feet. These pumps feature back pull-out design, heavy wall section casing, and high efficiency impellers. They are ideal for various applications with temperatures up to 250°F.

janethines
Download Presentation

AMP 101

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. AMP 101 • Product Line 310 Series Inline End Suction

  2. AMP 101 • Product Features & Benefits • 310 Series Inline End Suction (REI) • 43 Models • 2” to 14” Discharge • Flows to 9,000 GPM • Heads to 450 Feet • Temperatures to 250°F

  3. AMP 101 • Product Features & Benefits • 310 Series Inline End Suction (REI) • 33 Models • 2” to 14” Discharge • Flows to 9,000 GPM • Heads to 450 Feet • Temperatures to 250°F • Back pull-out • Heavy wall section, centerline discharge casing • Integral foot on casing • Integral seal flush • Enclosed high efficiency impellers with back pump out vanes • Ground & polished 416 stainless steel shaft • Standard Carbon/Silicon-Carbide/EPDM mechanical seal • Standard front case wear rings, optional impeller wear rings • Hydraulically balanced impeller • Stocked C-Face motors

  4. AMP 101 • 310 Series Standard Construction • Casing – Class 30 Cast Iron • Casing Adapter – Class 30 Cast Iron • Case Wear Ring(s) – C836 Bronze • Impeller – C952 Bronze • Shaft – 420 Stainless Steel • Shaft Sleeve – C836 Bronze • Mechanical Seal – Carbon/Silicon-Carbide/EPDM Elastomers Options • Metallurgy – Ductile Iron, All Bronze, 316 Stainless Steel, Cd4MCu • Mechanical Seals – Materials and Type • Coatings – Enameled Casing or Impeller

  5. AMP 101 • 310 Series Inline End Suction (REI)

  6. AMP 101 • 310 Series Inline End Suction (REI)

  7. AMP 101 • 310 Series REI Inline End Suction REI – Close-Coupled Inline

  8. AMP 101 • 300 Series REI Casing Adapter • All Models Flanged (1-14” Through 12” Discharge) • Heavy Wall Thickness & Generous Corrosion Allowance • Heavy Casted Dimensional 300# Flanges • All Models Use Studs In Lieu Of Capscrews • Tapped Flanges For Easy Connection of Piping • Cast Integral Base • Pump Model & Rotation Casted Base • Tapped Gage Connection on Suction & Discharge Flange • Heavy Duty Case Wear Ring • Casted Integral Vortex Suppressor on Suction • O-Ring Gasket • Register Fit Between Casing and Stuffing Box • Tapped Drain

  9. AMP 101 • 300 Series REI Casing Adapter • Casing Adapter Has Integral Flush Line • Modular Design Allows for Sharing of Parts • 16 Casing Adapters Are Used on 49 Casings • Register Fit Between Casing Adapter & Motor Bracket

  10. AMP 101 • 300 Series REI Sleeve & Seal • Heavy Wall Shaft Sleeve • Shaft Sleeve Has Integral Spring Collar • Inner Diameter O-Ring • Carbon Rotary Face Standard • Silicon-Carbide Stationary Face Standard • EPDM Elastomers Standard • Stainless Steel Hardware Standard

  11. AMP 101 • 300 Series REI Impeller & Locknut • Heavy, Thick Shrouded Impellers For Durability • Francis Vane Impellers For Increased Efficiency • Back Pump Out Vanes Standard • Larger Impellers Are Hydraulically Balances • All Impellers Held In Place With Lock Washer & Nut

  12. AMP 101 • 300 Series REI Shaft Assembly • REI Models Use stocked C-Face Motor • 420 Stainless Steel Standard • Pump Unit Drives Off Of Motor Key • Multiple Set Screws Hold Axial Adjustment • C-Face Motors Stocked Worldwide • C-Face Design Allows Close-Coupling Through 300 HP • Wide Variety Of Motor Enclosures Available

  13. AMP 101 • 310 Series Inline End Suction • Aurora (380 Series) • Paco (VL Series) • Peerless (PV Series) • Crane Deming (3100 Series) • Weinman (CV Series) • Other Examples • Bell & Gossett (80 Series)

  14. AMP 101 • AMP REI Inline End Suction

  15. AMP 101 • Inline End Suction • AMP (310 Series ‘REI’) • Flows to 9,000 GPM • Heads to 450 Feet TDH • Temperatures to 300°F • Aurora (380 Series) • Flows to 600 GPM • Heads to 170 Feet TDH • Temperatures to 250°F

  16. AMP 101 • Aurora 380 Inline End Suction

  17. AMP 101 • Aurora 380 Inline End Suction Comparison

  18. AMP 101 • Inline End Suction • AMP (310 Series ‘REI’) • Flows to 9,000 GPM • Heads to 450 Feet TDH • Temperatures to 300°F • PACO (VL Series) • Flows to 3,600 GPM • Heads to 400 Feet TDH • Temperatures to 250°F

  19. AMP 101 • PACO VL Inline End Suction

  20. AMP 101 • PACO VL Inline End Suction Comparison

  21. AMP 101 • Inline End Suction • AMP (310 Series ‘REI’) • Flows to 9,000 GPM • Heads to 450 Feet TDH • Temperatures to 300°F • Peerless (PV Series) • Flows to 800 GPM • Heads to 300 Feet TDH • Temperatures to 225°F

  22. AMP 101 • Peerless PV Inline End Suction

  23. AMP 101 • Peerless PV Inline End Suction Comparison

  24. AMP 101 • Inline End Suction • AMP (310 Series ‘REI’) • Flows to 9,000 GPM • Heads to 450 Feet TDH • Temperatures to 300°F • Crane Deming (3100 Series) • Flows to 1,000 GPM • Heads to 400 Feet TDH • Temperatures to 350°F

  25. AMP 101 • Crane Deming 3100 Inline End Suction

  26. AMP 101 • Crane Deming 3100 Inline End Suction Comparison

  27. AMP 101 • AMP 310 Series Inline End Suction Summary • Wide Selection • Close Coupled Through 14” Discharge • Heavy Duty Design • Upgraded Mechanical Seal • Casted Integral Base • Service • Back Pull Out • Front Loading Seal

More Related