Download
1 / 139
1.41k likes | 1.62k Views
Find the Star. Top of Star. On An Average Day in US. 133 die in car crashes 30 die from falls 15 from drowning 13 from fires & burns 11 from poisoning 10 from suffocation resulting from swallowed food or objects. 5 die in firearm accidents 2 die from poisoning by gases & vapors
E N D
Find the Star Top of Star
On An Average Day in US • 133 die in car crashes • 30 die from falls • 15 from drowning • 13 from fires & burns • 11 from poisoning • 10 from suffocation resulting from swallowed food or objects • 5 die in firearm accidents • 2 die from poisoning by gases & vapors • 68 injured playing golf • 153 injured using chain saw • 307 injured in bathtub or shower
Coal Mine Fatalities • 1990 66 • 1995 47 • 1996 38 • 1997 30 • 1998 29 • 1999 34 • 2000 36 • 2002 27 • 2003 29 • 2004 28 • 1910 2821 • 1920 2272 • 1930 2063 • 1940 1388 • 1950 643 • 1960 325 • 1970 260 • 1980 133 • US Coal Mine Fatalities
COAL MINE FATALITY - On Friday, September 3, 1999, a preparation plant mechanic and another employee were using a material hoist to lift a 55 gallon drum to the third floor of the preparation plant. When the mechanic reached out to guide the suspended drum to the third floor, a corroded railing gave way and he fell approximately 50 feet to the ground floor of the preparation plant. • BEST PRACTICES • Safety belts should be worn at all times where a danger of falling exists. • Tag lines or other devices should be used to guide suspended loads during hoisting operations. • Metal railings, walkways and stairs should be examined frequently for corrosion or other signs of deterioration • This is the 24th fatality reported in calendar year 1999 in the coal mining industry. As of this date in 1998, there were 21 fatalities. This is the second fatality classified as Fall of Person in 1999. • For more information: MSHA's Fatal Accident Investigation Report [FTL99C24] Did not block against motion
COAL MINE FATALITY - On Friday, May 7, 1999, an electrician fell through an unguarded 26 inch by 26 inch opening at the top of a 36 inch diameter escape/ventilation shaft on the southeast side of the underground coal storage bunker. The victim was washing the area with a high pressure hose. There were no eyewitnesses to the accident. The victim was discovered by a co-worker on a platform, thirty feet and six inches below the top of the shaft. The victim received multiple injuries and was pronounced dead at the scene by a physician. • BEST PRACTICES • Protect and guard all openings through which persons or material may fall. • Areas where persons are required to work or travel should be kept clear of all extraneous material and other stumbling or slipping hazards. • Regulate line pressure on water hoses to a safe and manageable working pressure. • Provide training to every person to recognize hazardous conditions in their work area. • This is the 12th fatality reported in calendar year 1999 in the coal mining industry. As of this date in 1998, there were 9 fatalities. This is the first fatality classified as Fall of Person in 1999. • For more information:MSHA's Fatal Accident Investigation Report [FTL99C12]
COAL MINE FATALITY - On Sunday, April 30, 2000, a 26-year-old underground electrician, with 5-1/2 years mining experience, was fatally injured when he came in contact with an energized high voltage circuit on a High Tech Electric Section Power Distribution Center. The victim had been assigned to replace two circuit breakers on the power center, which would not have required the victim to enter the high voltage side of the power center. At the time of the investigation, visibility was impaired on one of the two sight windows that are provided to determine the position of the knife blades which are used as a visible disconnect. Since one of the blade switches could not be seen through the windows, it is believed that the victim opened the lid to the 7200-volt incoming power to ensure that all three of the knife blade switches were in the open position. The power center was equipped with lid switches to de-energize the power when the lids were opened; however, the lid switch on the high voltage compartment had been defeated. There were no eyewitnesses to the accident. Submit your own suggestion for a remedy to prevent this type of accident in the future. Please specify if you wish your submission to be anonymous or whether your name may be used. Please include the year of the fatality and the fatality number. • Best Practices • Care should be taken to ensure all circuits are de-energized before any work is started. • De-energization devices should never be defeated and should always be maintained in operable condition. • Proper lockout and tag procedures should be followed at all times. This is the tenth fatality reported in calendar year 2000 in the coal mining industry. As of this date in 1999, there were eleven fatalities. This is the second electrical fatality reported in the coal mining industry in 2000. There were no electrical fatalities reported in the same period in 1999. -----------------------------------------------------------------------------------------------------------------------------------------This bulletin is part of the Mine Safety and Health Administration's (MSHA) program to alert the mining industry in a timely manner of a tragic loss of life in the mines. We encourage you to consider the above information as you make safety decisions for or recommendations to your company or constituency. The information provided in this notice is based on preliminary data ONLY and does not represent final determinations regarding the nature of the incident or conclusions regarding the cause of the fatality.For more information:MSHA's Fatal Accident Investigation Report Guard rail broke
IS SAFETY ON YOUR MIND ? AWARENESS
Please Read Most will not read correctly
COAL MINE FATALITY - On Wednesday, March 14, 2001, a 58-year old preparation-plant utility man, with 27 years experience, was fatally injured while he was performing clean up duties at a raw coal reclaim dump area. The victim was last seen at about 7:00 p.m., washing down a concrete pad at the mouth of a reclaim tunnel. There were no eyewitnesses to the accident. However, the victim either fell through an opening, measuring approximately 56 inches by 80 inches, in a platform located at the mouth of a reclaim tunnel, or entered the area through a coal feeder opening located in the raw coal stock pile. The victim was later discovered after being discharged from a raw coal silo. Submit your own suggestion for a remedy to prevent this type of accident in the future. Please specify if you wish your submission to be anonymous or whether your name may be used. Please include the year of the fatality and the fatality number. Fly Rock from Blasting • Best Practices • Enclose all openings over conveyor belts that have the potential for a person to inadvertently fall through onto a moving conveyor belt. • Establish safe work positions free of fall hazards for persons performing wash down of surface facilities. This is the 4th fatal accident, reported in calendar year 2001, in the coal mining industry. As of this date in 2000, there were six fatalities reported in the coal mining industry. This is the first fatal accident, classified as Fall of Person, reported in the coal mining industry in 2001. At this time in 2000, there was one fatal accident, classified as Fall of Person, in the coal mining industry.-----------------------------------------------------------------------------------------------------------------------------------------This bulletin is part of the Mine Safety and Health Administration's (MSHA) program to alert the mining industry in a timely manner of a tragic loss of life in the mines. We encourage you to consider the above information as you make safety decisions for or recommendations to your company or constituency. The information provided in this notice is based on preliminary data ONLY and does not represent final determinations regarding the nature of the incident or conclusions regarding the cause of the fatality.For more information:MSHA's Fatal Accident Investigation Report - Not Available Yet
Transportation & Haulage Accidents Click on Pic for PP
COAL MINE FATALITY - On Thursday, January 7, 1999, a highwall drill operator, while inside the operator's cab, was fatally injured when a portion of the highwall collapsed. Large pieces of sandstone fell from the highwall causing severe damage to the drill and the operator's compartment. The portion of the highwall which collapsed measured approximately 50 feet in height by 60 feet in width. • BEST PRACTICES • Highwalls should be examined often, especially during periods of changing weather conditions. • The ground control plan at every mine should be followed • All miners should be trained to recognize hazardous highwall conditions. • Drill operators should not drill from positions that increase exposure to highwall hazards. • This is the first coal mine fatality in 1999. As of January 07 of last year there had been no fatalities. This death is the first classified as Fall/Highwall in 1999. • For more information: MSHA's Fatal Accident Investigation Report [FTL99C01]
COAL MINE FATALITY - On Monday, February 14, 2000, a 44 year old preparation plant operator was fatally injured at a surface coal facility. A few minutes after speaking to the victim about his intentions to secure tools to adjust a belt tail pulley, the front end loader operator proceeded to the stockpile to load coal. Approaching the pile, the cutting edge of the loader bucket struck the victim and he was scooped into the bucket with the load of coal. In the process of dumping the bucket, the front-end loader operator saw the victim fall out of the bucket and into the hopper. The front-end loader operator was unaware that the victim was in the stockpile area. Submit your own suggestion for a remedy to prevent this type of accident in the future. Please specify if you wish your submission to be anonymous or whether your name may be used. Please include the year of the fatality and the fatality number. • Best Practices • Reflective materials on clothing should be worn when traveling on foot in areas where reduced lighting could affect personal safety. • No person should walk or travel in areas where equipment is being operated without equipment operators being aware of their presence. This is the third fatality reported in calendar year 2000 in the coal mining industry. As of this date in 1999, there were three fatalities. This the first fatality classified as POWERED HAULAGE in year 2000.-----------------------------------------------------------------------------------------------------------------------------------------This bulletin is part of the Mine Safety and Health Administration's (MSHA) program to alert the mining industry in a timely manner of a tragic loss of life in the mines. We encourage you to consider the above information as you make safety decisions for or recommendations to your company or constituency. The information provided in this notice is based on preliminary data ONLY and does not represent final determinations regarding the nature of the incident or conclusions regarding the cause of the fatality.For more information:MSHA's Fatal Accident Investigation Report
V AVOID P INCH POINT AREAS
COAL MINE FATALITY - On Wednesday, October 4, 2000, a 50 year old bulldozer operator, with 22 years mining experience, was fatally injured when the Caterpillar D11N bulldozer he was operating backed over the edge of a 95 ft. highwall. The dozer was backing up from a maintenance area to a drill bench site when the dozer traveled over the highwall. The victim was ejected from the cab of the bulldozer and died as a result of his injuries. Submit your own suggestion for a remedy to prevent this type of accident in the future. Please specify if you wish your submission to be anonymous or whether your name may be used. Please include the year of the fatality and the fatality number. • Best Practices • Adequate berms should be constructed and maintained along the outer edge of elevated work areas where there is a danger of traveling over highwalls. • Equipment operators should be familiar with their working environment at all times. Safety precautions should be taken to compensate for different weather and lighting conditions. • Mobile equipment operators should wear seat belts whenever the machine is in motion. This is the 30th fatality reported in calendar year 2000 in the coal mining industry. As of this date in 1999, there were 30 fatalities. This is the 8th accident classified as machinery reported in the coal mining industry in 2000. As of this date in1999, there were 3 fatal accidents classified as machinery. -----------------------------------------------------------------------------------------------------------------------------------------This bulletin is part of the Mine Safety and Health Administration's (MSHA) program to alert the mining industry in a timely manner of a tragic loss of life in the mines. We encourage you to consider the above information as you make safety decisions for or recommendations to your company or constituency. The information provided in this notice is based on preliminary data ONLY and does not represent final determinations regarding the nature of the incident or conclusions regarding the cause of the fatality.For more information:MSHA's Fatal Accident Investigation Report
TRAMMING MINER TO THE FACE ALWAYS CHECK BACKSIDE OF CROSSCUTS BEFORE CUTTING BEGINS
2004 Remote Control Miners Click on pic For PP
V V V V V BUSTED OR CRACKED ROOF KETTLEBOTTOM SLOUGHING RIBS WORST OF ALL - SLIPS UNUSUAL ROOF CONDITIONS A. BUSTED OR CRACKED ROOF B.KETTLEBOTTOMS C. SLOUGHING RIBS D. SLIPS STEP #7
COAL MINE FATALITY -On Monday, March 29,1999, a 27 year-old truck driver was operating a partially loaded 30 ton capacity 800 Mack truck. The vehicle failed to negotiate a slight curve while descending a fourteen percent grade on the mine entrance haulage road. The truck traveled through an earthen berm, overturning twice and came to rest 150 feet below the roadway. The driver either jumped or was thrown from the truck during the first overturn. The driver received fatal head, neck and chest injuries. The emergency medical personnel detected no signs of life at the scene. • BEST PRACTICES • PERFORM PRE-OPERATIONAL SAFETY INSPECTIONS • MAINTAIN CONTROL OF VEHICLES AT ALL TIMES • ALWAYS OPERATE TRUCKS AT SPEEDS CONSISTENT WITH GRADES AND ROAD CONDITIONS • ALWAYS WEAR SEATBELTS WHEN OPERATING VEHICLES. SEATBELTS HAVE SAVED MANY LIVES DURING MINE HAULAGE ACCIDENTS. • This is the 9th fatality reported in calendar year 1999 in the coal mining industry. As of this date in 1998, there were 9 fatalities. This is the third fatality classified as Powered Haulage in 1999. • For more information:MSHA's Fatal Accident Investigation Report [FTL99C09]
COAL MINE FATALITY - On Thursday, May 18, 2000, a 30 year old front-end loader operator, with seven years of mining experience, was loading rock binder material above a coal seam in preparation for the removal of the uncovered coal. The front-end loader bucket penetrated a 20-inch diameter, high pressure, public utility, natural gas transmission line. The front-end loader became engulfed in flames resulting in serious burns to the loader operator. The victim died the following day from the extensive burns he had received. Submit your own suggestion for a remedy to prevent this type of accident in the future. Please specify if you wish your submission to be anonymous or whether your name may be used. Please include the year of the fatality and the fatality number. • Best Practices • No excavation work should be done near gas transmission lines without knowing exactly where the line is located. • Adequate on-shift examinations should be conducted to determine that gas transmission lines are not contacted while excavation work is in progress in the area. • Mine maps shall be kept up-to-date to reflect any changes in gas transmission line and well locations. This is the thirteenth fatality reported in calendar year 2000 in the coal mining industry. As of this date in 1999, there were thirteen fatalities. This is the first ignition fatality reported in the coal mining industry in 2000. There were no ignition fatalities reported in 1999. -----------------------------------------------------------------------------------------------------------------------------------------This bulletin is part of the Mine Safety and Health Administration's (MSHA) program to alert the mining industry in a timely manner of a tragic loss of life in the mines. We encourage you to consider the above information as you make safety decisions for or recommendations to your company or constituency. The information provided in this notice is based on preliminary data ONLY and does not represent final determinations regarding the nature of the incident or conclusions regarding the cause of the fatality.For more information:MSHA's Fatal Accident Investigation Report Worker fell 120 Ft. No fall protection !
