1 / 14

Safety & EMC Standards & Block Requirements

This lab focuses on determining the applicable power, safety, and EMC standards for products, updating the product and block level requirements, and identifying specific protection devices needed for block designs. The lab also covers the mitigation of hazards such as electrostatic discharges, magnetic field energy, RF electric field energy, interference with other electronic systems, and poor incoming AC power quality. Safety hazards and mitigations for single point device failures, burns, electric shock, fire/explosion, sharp edges/pinch points, and abusive/unknowing users are also addressed.

jayw
Download Presentation

Safety & EMC Standards & Block Requirements

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 318-595 Lab 2 Safety & EMC Standards& Block Requirements • Objectives • Introduction to Global Safety Standards • Introduction to Global Power & EMC Standards • Determine Applicable Power, Safety & EMC Standards • Update Product Level Requirements • Update Block Level Requirements as needed for mitigations • Determine Specific Protection Device Additions Needed for your Block Designs • If a particular hazard does NOT apply, you must justify why !!!

  2. 318-595 Lab 2 EMC Hazards & Mitigations • Deliverable 1: EMC Mitigation Slides (Team Deliverable) • You must guard your product against the following real world hazards • Electrostatic Discharges • Ambient or Stray Magnetic Field Energy • RF Electrical Field Energy • Interference of Your Product with Other Electronic Products • Poor Commercial Incoming AC Power Quality • Find and Document All the EMC Test Standards applicable to your product to provide reasonable test coverage against the above hazards (See Attached Table + EU Directive Lists) • Develop 1 page (minimum) Mitigation plans that include any design aspects as well as brief description of test plans to verify robustness (see template slides) • Identify which blocks are affected by design aspects and add appropriate requirements to those blocks

  3. 318-595 Lab 2 Med Device Directive EMC Test Summary US/FCC:47 CFR 15 - Radio Frequency Devices 47 CFR 18 - Industrial Scientific and Medical Equipment IEC:60601-1-2 Electromagnetic compatibility - Requirements and tests 61000-3-2 EMC Part 3: Limits - Section 2: Limitation of harmonics in low-voltage supplies <16A 61000-3-3 EMC Part 3: Limits - Section 3: Limitation of voltage fluctuations and flicker in low-voltage supplies <16A 61000-3-5 EMC Part 3: Limits - Section 5: Limitation of voltage fluctuations and flicker in low-voltage supplies >16A 61000-4-1 EMC Part 4: Test/measurement techniques - Section 1: Overview of immunity tests 61000-4-2 EMC Part 4: Test/measurement techniques - Section 2: ESD immunity tests 61000-4-3 EMC Part 4: Test/measurement techniques - Section 3: Radiated radiofrequency immunity tests 61000-4-4 EMC Part 4: Test/measurement techniques - Section 4: Electrical fast transient/burst immunity tests 61000-4-5 EMC Part 4: Test/measurement techniques - Section 5: Surge immunity tests 61000-4-6 EMC Part 4: Test/measurement techniques - Section 6: Conducted radiofrequency immunity tests 61000-4-7 EMC Part 4: Test/measurement techniques - Section 7: General guide on harmonics measurement and instrum. 61000-4-8 EMC Part 4: Test/measurement techniques - Section 8: Power frequency magnetic field immunity tests 61000-4-9 EMC Part 4: Test/ measurement techniques - Section 9: Pulsed magnetic field immunity tests 61000-4-10 EMC Part 4: Test/measurement techniques - Section 10: Damped oscillatory magnetic field immunity tests 61000-4-11 EMC Part 4: Test/measurement techniques - Section 11: Voltage dips, short interruptions and variations CISPR:11 Limits and methods of measurement for Industrial, Scientific and Medical Equipment 16 Specifications for Radio Interference Measuring Apparatus and Measurement Methods 22 Limits and Methods of Measurements of Radio Interference of Information Technology Equipment For all applicable Stds, your Product Level Requirements should include Engineering Test Limits in addition to Certification Test Limits

  4. 318-595 Lab 2 Electro-Static Discharge • Mitigation Design/Devices/Materials/Packaging • Affected Blocks • Test(s) Required to Verify Protection

  5. 318-595 Lab 2 Magnetic Field Energy • Mitigation Design/Devices/Materials/Packaging • Affected Blocks • Test(s) Required to Verify Protection

  6. 318-595 Lab 2 RF Electric Field Energy • Mitigation Design/Devices/Materials/Packaging • Affected Blocks • Test(s) Required to Verify Protection

  7. 318-595 Lab 2 Interference with Other Electronic Systems • Mitigation Design/Devices/Materials/Packaging • Affected Blocks • Test(s) Required to Verify Protection

  8. 318-595 Lab 2 Poor Incoming AC Power Quality • Mitigation Design/Devices/Materials/Packaging • Affected Blocks • Test(s) Required to Verify Protection

  9. 318-595 Lab 2 Safety Hazards & Mitigations • Deliverable 2: Safety Mitigation Slides (Team Deliverable) • You must make the product immune to these real world hazards • Single Point Device or Component Failures in Unsafe Manner • Burns from Touchable Surfaces > 40oC or High Temp Over Ambient • Electric Shock • Fire, Explosion or Shattering • Sharp Edges and Pinch Points • Abusive or Unknowing Users including Children • Find and Document All the Safety Test Standards applicable to your product to provide some safety test coverage • Develop 1 page (minimum) Mitigation plans that include any design aspects as well as brief description of test plans to verify robustness (see template slides) • Identify which blocks are affected by design aspects and add appropriate requirements to those blocks

  10. 318-595 Lab 2 Unsafe Single Point/Device Failures • Mitigation Design/Devices/Materials/Packaging • Affected Blocks • Test(s) Required to Verify Protection

  11. 318-595 Lab 2 Burns from Hot, Touchable Surfaces • Mitigation Design/Devices/Materials/Packaging • Affected Blocks • Test(s) Required to Verify Protection

  12. 318-595 Lab 2 Electric Shock • Mitigation Design/Devices/Materials/Packaging • Affected Blocks • Test(s) Required to Verify Protection

  13. 318-595 Lab 2 Fire, Explosion or Shattering • Mitigation Design/Devices/Materials/Packaging • Affected Blocks • Test(s) Required to Verify Protection

  14. 318-595 Lab 2 Sharp Edges & Pinch Points • Mitigation Design/Devices/Materials/Packaging • Affected Blocks • Test(s) Required to Verify Protection

More Related