1 / 25

K_S NOTE Power Study

K_S NOTE Power Study. NDK100/ PE Jimmy. 1. (1) DOCK_PWR19_F&VREGIN19& VCC3SW Power generate process with adapter. U12. CV19. Dock_PWR19_F. F10. Adapter In. F14. VREGIN19. VCC3SW. Input. output. U74. VCC3SW. VREGIN19. 因此只要 power VREGIN19 supply to U74 , 無須控制信號 U74 產生 VCC3SW.

kaleb
Download Presentation

K_S NOTE Power Study

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. K_S NOTE Power Study NDK100/ PE Jimmy

  2. 1. (1) DOCK_PWR19_F&VREGIN19& VCC3SW Power generate process with adapter U12 CV19 Dock_PWR19_F F10 Adapter In F14 VREGIN19

  3. VCC3SW Input output U74 VCC3SW VREGIN19 因此只要power VREGIN19 supply to U74 , 無須控制信號U74產生VCC3SW

  4. VINT19 U13 CV19 VINT19 When DCIN_DRV=H, 打開 U13 and generate VINT19 DOCK_PWR19_F &VREGIN19& VCC3SW Power Sequence

  5. 1. (2) VREGIN19& VINT19 Power generate process with battery U41/U45 U48 BAT-PWR-17 VINT19 Battery insert F8 M-BAT-PWR F12 VREGIN19

  6. 2.Power on Enable signal generate VINT19 DOCK_PWR19 when adapter insert and U64 detect AC power OK , then generate EXTPWR.

  7. EXTPWR_PMH generate process and Power Sequence EXTPWR 信號 be sent to Q50 產生EXTPWR_PMH . Of course , system need Power VL5 來打開Q50 . VL5 generate process as next page:

  8. VL5 R189 U58 MAX1977_LOD5 Vl5 VINT19 When U58 detect VINT19 OK , 產生 MAX1977_LCDO5 , 再通過R189產生VL5

  9. M1_ON & M2_ON&AUX_ON EXTPWR_PMH Control Signal be sent to U72 , 然后產生Control Signal M1_ON/M2_ON/AUX_ON M1_ON U72 EXTPWR_PMH M2_ON PWH7 AUXON

  10. M1_ON & M2_ON&AUX_ON Sequence

  11. PWH Control Signal Sequence 這里順便了解一下PWH Control Signal Sequence • System detect EXTPWR OK then generate M_ON & AUX_ON • System detect PWRSTWITCH OK then generate A_ON &B_ON , • 也就是說﹕ • System generate M_ON & AUX_ON before pressing power button • System generate A_ON & B_ON after pressing power button

  12. VCC3M_ON & VCC5M_ON & VCC1R5M_ON & VCC1R2AUX_ON & VCC3AUX_ON

  13. VCC3M & VCC5M Output VCC3M Output VCC5M Enable Signal : VCC5M_ON VINT19 U72 Max1977 VCC3M&VCC5M VCC5M_ON

  14. VCC3M & VCC5M Sequence

  15. MPWRG VCC5M VCC3M When U74 detect VCC3M&VCC5M all OK , then it send MPWRG VCC3M&VCC5M U74 MPWRG VREGIN19 BD4175KVT

  16. MPWRG Sequence

  17. MPWRG Signal generate high signal when the following condition are satisfied. (1) VCC3M_ON& VCC5M_ON High (2) VCC5M Voltage SPEC: 4.311V~4.461V VCC3M Voltage SPEC : 2.793V~2.943V shut down when the following condition are satisfied (3) VCC5M < 4.311V or VCC5M > 4.461V , M_PGS shut down (4) VCC3M> 2.943V or VCC3M< 2.793V , M_PGS shut t down 5M_ON & 3M_ON AND M_PGS VCC3M&VCC5M

  18. VCC1R5M Power Output Control signal VCC5M&VINT19 U57 Max1540 VCC1R5M VCC1R5M_ON

  19. VCC1R5M Sequence

  20. VCC1R2AUX VCC1R2AUX VCC1R5M VCC1R2AUX U35

  21. VCC1R2AUX Sequence

  22. VCC2R5M U30 VCC3M VCC2R5M

  23. VCC2R5AUX & VCC3AUX VCC2R5M Q46 VCC2R5AUX VCC3AUX_ON VREGIN19 U74 VCC3AUX_DRV VCC3AUX Q49 VCC3M

  24. VCC2R5AUX & VCC3AUX Sequence

  25. Summary 以上介紹的Power 是在 Adapter insert system but do not power on 產生的 , 下面介紹Power on 后系統的上電情況.

More Related