1 / 1

NCSX Modular Coil Vacuum-Pressure-Impregnation

Vacuum applied to coil and draws epoxy into coil mold. COIL. Mold. Epoxy enters the coil mold. NCSX Modular Coil Vacuum-Pressure-Impregnation. VPI Process. VPI Cure Cycle. Vacuum-Pressure-Impregnation

kim-johns
Download Presentation

NCSX Modular Coil Vacuum-Pressure-Impregnation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Vacuum applied to coil and draws epoxy into coil mold COIL Mold Epoxy enters the coil mold NCSX Modular Coil Vacuum-Pressure-Impregnation VPI Process VPI Cure Cycle Vacuum-Pressure-Impregnation “VPI” is the process used to fill a coil with epoxy. It’s purpose is to enhance both mechanical and dielectric properties of the coil. Using a combination of vacuum and pressure, the coils are filled. . - Vacuum and epoxy fill lines VPI Delivery Schematic for Modular Coils Curing oven Epoxy fill tank Viscosity measurements are taken to monitor the consistency of the epoxy resin during VPI Typical VPI setup

More Related