1 / 33

The Need to Update Part 68.317 Volume Control Requirements

TR41.3-11-08-007b-L TR41.9-11-08-011b-L. The Need to Update Part 68.317 Volume Control Requirements. TIA Presentation to FCC OET August 24, 2011. Agenda. Overview of TIA – Brian Scarpelli Current Part 68 Volume Control Requirements – Steve Whitesell Conversational Gain – Al Baum

krista
Download Presentation

The Need to Update Part 68.317 Volume Control Requirements

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. TR41.3-11-08-007b-L TR41.9-11-08-011b-L The Need to Update Part 68.317 Volume Control Requirements TIA Presentation to FCC OET August 24, 2011

  2. Agenda • Overview of TIA – Brian Scarpelli • Current Part 68 Volume Control Requirements – Steve Whitesell • Conversational Gain – Al Baum • FYI: New TIA-4953 for High-Gain Amplified Telephones – Al Baum • Summary and Recommendation – Al Baum

  3. Telecommunications Industry Association • A leading Standards Developing Organization (SDO) accredited byAmerican National Standards Institute (ANSI). • Represents the global information and communications technology (ICT) industry through • Standards development • Advocacy • Business opportunities • Market intelligence • World-wide environmental regulatory compliance.

  4. Telecommunications Industry Association • Supports the development of innovative technology to facilitate access to information by all Americans, including those with disabilities.

  5. Steve Whitesell TR-41 Chair Independent Consultant

  6. Part 68 Volume Control RequirementsThe need for updated references

  7. §68.317 Requirements Minimum 12 dB gain relative to normal unamplified level. Automatic reset required if gain exceeds 18 dB. Gain is specified as change in Receive Objective Loudness Rating (ROLR) level and refers to two outdated TIA standards. Normal unamplified level must also meet ROLR requirements specified in these two outdated standards. However, both the ROLR metric and the artificial ear specified for these tests have been replaced over time.

  8. §68.317 References For analog telephones, the reference is to ANSI/EIA-470-A-1987. This standard was replaced by • ANSI/TIA/EIA-470-B-1997 • ANSI/TIA-470.110-C-2004 • ANSI/TIA-470.110-C-1-2007 (addendum) Currently working on TIA-470.110-D (2012).

  9. §68.317 References (cont) For digital telephones, the reference is to ANSI/EIA/TIA-579-1991. This standard was replaced by • ANSI/TIA/EIA-579-A-1998 • TIA/EIA/IS-810-1999 • ANSI/TIA/EIA-810-A-2000 • ANSI/TIA-810-B-2006 There is also a standard for wideband telephones • TIA-920-2002 • TIA-920.110-A-2011

  10. Metric Changes Receive Objective Loudness Rating (ROLR) per IEEE Std 661-1979 was specified in original 470-A-1987 and 579-1991 references. Receive Loudness Rating (RLR) per ITU-T Recommendation P.79 introduced in Annex B of 470-B-1997. RLR became specified metric in 579-A-1998 and 470.110-C-2004, with RLR to ROLR correlation info in annexes. Conversational Gain is being introduced as the measure for receive volume control in the “D” revision to 470.110 and will be propagated through other TIA standards.

  11. Artificial Ear Changes IEC 318 coupler for supra-aural earphones (also known as ITU-T Recommendation P.57 Type 1 ear) was specified for original 470-A-1987 and 579-1991 measurements. Transition to RLR metric in 579-A-1998 added a frequency-dependent assumed ear leakage factor LE to the response measured on the IEC 318 coupler. Use of a Head and Torso Simulator (HATS) with P.57 Type 3.3 artificial ear having a soft rubber pinna introduced in 470.110-C-2004 and 810-B-2006. • High leak condition (10 N force) intended to simulate normal use • Low leak condition (18 N force) intended to approximate LE corrected IEC 318 response

  12. Artificial Ear Changes (cont) Use of HATS with P.57 Type 3.3 artificial ear and high leak condition only is identified as the preferred test method in 920.110-A-2011 wideband digital standard. This combination will be required by 470.110-D and will be propagated to other TIA standards.

  13. TSB-31 Guidance TIA TSB-31-B-1998, Part 68 Rationale and Measurement Guidelines, provided suggested test methods for showing compliance with 470-A-1987 and 579-1991. TIA TSB-31-C-2008 discussed use of the Type 3.3 artificial ear in the low leak condition for handsets that do not seal on the Type 1 ear and added guidance on mapping RLR values to ROLR requirements. TSB-31-C-1-2009 (addendum) changed to the use of the high leak condition for handsets using the Type 3.3 ear, but did not alter the RLR to ROLR conversion relationship. TSB-31-D-2011 made no further changes to the artificial ear specifications or RLR to ROLR conversion relationship.

  14. Industry Canada CS-03 (IC equivalent to Part 68) references 470-B-1998 for analog phones and 579-A-1998 for digital phones. IC is considering a proposal to update the references to 470.110-C and 810-B (i.e., the latest published standards).

  15. Al Baum Engineering Manager Uniden America Corporation

  16. Conversational GainThe new amplification metric for the 21st century

  17. Product Demos Reveal a Problem Manufacturers demonstrated telephones during 2005-2007 HLAA National Conventions. During these demos manufacturers discovered that many people believe they need more amplification than they actually need. Why?

  18. 2008 Investigation Amplification was measured for seven phones advertised as providing above average amplification. These phones represented five major brand names from four different manufacturers. The advertised amplification claims for these phones were compared to their measured gain using the industry standard measurement method.

  19. 2008 Investigation Results Industry standard amplification measurements were less than the claimed values for all seven samples. In fact, one sample claiming “Up to 40dB” only had about 4 to 5dB more amplification than a typical retail phone. (Ref: TR41.3-08-08-016)

  20. 2008 Investigation Results What does this mean? The consumer’s assumption is not correct. All manufacturers are NOT measuring amplification the same way. Therefore consumers cannot simply use the manufacturer’s amplification claims as a safe guide to determine how much amplification they need. So how do we correct this problem?

  21. CONVERSATIONAL GAIN A New More Rational and Intuitive Way To Measure Telephone Speech Amplification

  22. Getting Back to Basics Conversational Gain =How loud a voice is compared to a typical face-to-face conversation. The Reference: Two people talking face-to-face 1 meter apart. 0dB conversational gain means that the voice heard from the telephone is the same level as would occur if they were speaking face-to-face 1 meter apart.

  23. How Loud is0dB Conversational Gain? However, when listening with only one ear, a sound must be 6dB louder in order to be perceived to be at the same level as a sound that is heard with both ears. 0dB = 64 dBSPL in each ear (Ref: IEEE Std 269-2010) Therefore: 0dB = 64 dBSPL in both ears (Speakerphone) 0dB = 70 dBSPL in one ear (Handset)

  24. Benefits of UsingConversational Gain • Uses an Intuitive Reference 20dB gain means that I will hear your voice 20dB louder than if we were speaking face-to-face. • Permits easy determination of absolute dBSPL Simply add 64 (speakerphone) or 70 (handset) to the conversational gain. • Permits a valid comparison to the sound levels produced by other devices Results in meaningful gain measurements that can be used by consumers to help them select a phone that meets their specific needs. Can also be applied to other devices that produce an acoustic speech output.

  25. TIA-4953 New project to write a standard for specialized high-gain amplified telephones

  26. Why Write a New Standard? The purpose of this new project is to establish a measurement specification that enables comparing different high gain amplified telephones in a meaningful way. This will provide useful information to assist consumers with hearing loss to select a telephone that will be more likely to meet their specific needs.

  27. Basis of the Specification Standardize three categories of hearing loss, Mild, Moderate, and Severe and the associated acoustic amplitude (gain) and tone control (frequency response) necessary to meet the needs of people with hearing impairment based on this categorization. Three primary parameters are specified: 1. Gain (based on conversational gain) 2. High Frequency Emphasis (quantification of frequency response needs) 3. Ringer acoustic amplitude (dBSPL per TIA.470.220-C measurement methods) and ringer signal spectrum.

  28. Tone Requirements An extensive hearing loss study was performed by the European Hearing Instrument Manufacturers Association (EHIMA) and a report was published in 2007. The goal of the EHIMA study was to establish “standard audiograms” that could be used to enable efficient fitting of hearing aids. For this new draft standard, the data from the EHIMA study was used to derive two standard audiograms (slightly sloping and steeply sloping) for each of three hearing loss categories (Mild, Moderate, and Severe). These standard audiograms were then used to derive the required high frequency emphasis an amplified telephone should provide in order to meet the needs of each of the standard audiograms.

  29. Ringer Requirements The acoustic ringer of an amplified telephone needs to be loud enough to compensate for a person’s hearing loss. The compensation required is a combination of increased level (louder ringer) and having lower frequencies for the acoustic ringer signal than specified in TIA−470.220−C. Lower frequency ringing signals will require less gain than higher frequencies due to the high frequency hearing loss experienced by most people with hearing loss. Similar to the handset acoustics, the ringer acoustics are specified using a quantity of gain above a normal level. TIA−470.220−C specifies a normal acoustic ringer level to be 75 dBSPL.

  30. The Quandary Something needs to be done! Should Part 68 be updated to the latest published standards to harmonize with the action being proposed for CS-03? Should we wait until the relevant standards are all updated to use Conversational Gain and then request the FCC and IC to reference those documents in Part 68 and CS-03? TIA is on record with comments to the U.S. Access Board recommending Conversational Gain be used as the measure for volume control.

  31. Recommendation Fast track a new standard specifying Conversational Gain requirements for analog and digital phones and request FCC and IC to change Part 68 and CS-03 to point to it. • Require minimum 18 dB Conversational Gain, (equivalent to old requirement of 12 dB above normal unamplified level). • Require automatic reset if Conversational Gain is greater than 24 dB, (equivalent to old requirement of 18 dB). • No need to specify output at normal unamplified level since requirement is based on 6 dB Conversational Gain at that level. • Closes loop hole that allowed normal unamplified level to be biased toward low end of spec in order to more easily meet 12 dB gain requirement. Create addendum to TSB-31-D providing test procedures for Conversational Gain.

  32. Discussion Can such an update to Part 68 be made as an administrative change similar to the process used for updating the references to the C63.19 cell phone HAC standard, or does it require rulemaking? • Loudness of receive level provided to user remains the same although it is specified by a new metric and measured using a different artificial ear. • Will require pointing to a new standard.

  33. Thank you.www.tiaonline.org

More Related