1 / 16

2/1 DIRECT SHEAR

2/1 DIRECT SHEAR. Scissors Shear stress still Force/Area but different area Strain still deflection over length but angular distortion at right angles =angle in radians (for small strains). Angle  = /L. Area A. V. . . Original. L. . V. Shear Force V. Shear Stress  = V/A

larissa-mejia
Download Presentation

2/1 DIRECT SHEAR

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 2/1 DIRECT SHEAR • Scissors • Shear stress still Force/Area • but different area • Strain still deflection over length • but angular distortion at right angles • =angle in radians (for small strains)

  2. Angle  = /L Area A V   Original L  V Shear Force V Shear Stress  = V/A Shear Strain  = /L 2/2 EQUALITY OF STRESSESDEFINITION OF STRAIN y z x

  3. 2/3 EQUALITY OF MOMENTS • But that block is not in EQUILIBRIUM • It will rotate • There must be a matching pair of shears

  4. 2/4 SHEAR COUPLES Angle /2 = /2L Area A V  Original L  V Shear Force V Shear Stress  = V/A Shear Strain  = /L

  5. 2/5 Sign Conventions What is a positive direct stress? What is a positive shear stress? What is a positive moment? What is a positive force? What is a positive BENDING moment?

  6. -Fx Fx 2/6 Sign for Force and Stress Y Negative X Face Area A Z Positive X Face Area A x = -Fx/-A = +Fx/+A X

  7. Vxy Direction Face -Vxy Vxy 2/7 Sign for Shear Force & Stress Y Negative X Face Area A Z Positive X Face Area A  = -V/-A =+V/+A X

  8. 2/8 Sign for Moments and Rotations Y Y z,Mz Z X X

  9. 2/9 SIGN CONVENTION • +ve faces – outward normal pointing towards +ve direction • -ve faces – pointing towards origin • +ve shear stress – acts on a +ve face in a +ve dirn or a –ve face in a –ve dirn • +ve shear strain – when angle between two +ve or two –ve faces is reduced. • +ve shear stresses give +ve shear strains

  10. 2/10 PURE SHEAR • No normal stresses • Pure shear means no change of length • Can only apply in one direction • Pure shear produces (implies) • Diagonal Tension • Diagonal Compression

  11. 2/11 SHEAR TESTS • Stress–strain diagram in shear ( vs ) • Hooke’s Law in shear  = G. • G = Shear Modulus of Elasticity • Same units as E (Pa), steel = 75GPa • G = E/(2[1+]) • G,E and  not independent elastic props • 0<<0.5 so E/3<G<E/2

  12. 2/12 BOLT IN SINGLE SHEAR

  13. 2/13 BOLT IN SINGLE SHEAR

  14. 2/14 PIN IN DOUBLE SHEAR 2V V V V ave=V/A

  15. 2/15 Shear failure of wood block in compression

  16. 2/16 OTHER CAUSES OF SHEAR • Shear also appears in torsion

More Related