1 / 55

Finite Element Study of Structural Discontinuities

Finite Element Study of Structural Discontinuities. Presented By: Ike Lee and Nick Lin Project Advisor: Ioannis Korkolis. Presentation Objectives. Discuss background of structural discontinuities Introduce the finite element method Explain how to generate a finite element model

lindsay
Download Presentation

Finite Element Study of Structural Discontinuities

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Finite Element Study of Structural Discontinuities Presented By: Ike Lee and Nick Lin Project Advisor: Ioannis Korkolis

  2. Presentation Objectives • Discuss background of structural discontinuities • Introduce the finite element method • Explain how to generate a finite element model • Review previous work • Present new work • Discuss possibilities for future work • Answer questions

  3. What is a Structural Discontinuity? • A break or gap within a structural component that alters its behavior under load

  4. Examples of Structural Discontinuities • Holes: Often used to lighten an aerospace structure or to rivet components together • Cracks: Usually a result of material imperfections or areas of high stress

  5. Concerns • Uniform loading of a square plate results in a uniform stress distribution

  6. Concerns • Holes alter the stress distribution and induce stress concentrations. Study of Mesh Refinement EM 360 Fall 2002

  7. Concerns • Stress concentrations at crack tips • Crack propagation

  8. Possible Consequences • Stress fields around discontinuities can interact with each other and cause failure. Cessna 402C Mishap Investigation, 1999

  9. Solution Method • Structural discontinuity problems are often very difficult to solve analytically, sometimes impossible. • Our method is to use ABAQUS, a finite element program.

  10. The Finite Element Method (FEM) • General technique for constructing approximate solutions to boundary value problems Study of Mesh Refinement EM 360 Fall 2002

  11. How to Generate a Finite Element Model • An input file must be written containing the following two parts: • Model Data: This portion defines the geometry of the model and material properties. • History Data: This portion defines how the model will be loaded and what values should be outputted.

  12. Some Important Factors to Consider • Boundary Conditions • Load Type and Directions • Mesh Refinement Study of Mesh Refinement EM 360, Fall 2002

  13. Some Important Factors to Consider : Mesh Refinement Peterson’s Stress Concentration Factors, 1997 11 Elements 1 Second K=4.342 s ____ max K= s Finite Element Study of Structural Discontinuities, 2003

  14. Some Important Factors to Consider : Mesh Refinement 67 Elements 1 second K=4.41 Finite Element Study of Structural Discontinuities, 2003

  15. Some Important Factors to Consider : Mesh Refinement 211 Elements 1 second K=4.47 Finite Element Study of Structural Discontinuities, 2003

  16. Some Important Factors to Consider : Mesh Refinement 823 Elements 2 seconds K=4.512 Finite Element Study of Structural Discontinuities, 2003

  17. Some Important Factors to Consider : Mesh Refinement Approx. 3000 Elements 4 seconds K=4.517 Finite Element Study of Structural Discontinuities, 2003

  18. Some Important Factors to Consider : Mesh Refinement Approx. 19000 Elements 21 seconds K=4.520 Finite Element Study of Structural Discontinuities, 2003

  19. Mesh Convergence Curve Finite Element Study of Structural Discontinuities, 2003

  20. Computation Time Finite Element Study of Structural Discontinuities, 2003

  21. Mesh Convergence • Refining a coarse finite element mesh will result in a more accurate solution at the cost of computation time.

  22. Caveat and Approach • Just because a solution is obtained does not necessarily mean it is correct. Therefore, it is important to study the results and compare your solution with a known, correct solution.

  23. Previous Work Peterson’s Stress Concentration Factors, 1997 • Model 1 Finite Element Study of Structural Discontinuities, 2003

  24. Previous Work • Model 1 (continued) Finite Element Study of Structural Discontinuities, 2003

  25. Previous Work Peterson’s Stress Concentration Factors, 1997 • Model 2 Finite Element Study of Structural Discontinuities, 2003

  26. Previous Work • Model 2 (continued) Finite Element Study of Structural Discontinuities, 2003

  27. New Work • Reduction of stress concentrations from edges of holes • Finite element modeling of cracks • Reduction of crack stress intensity factor

  28. Reducing Stress Concentrations from Holes • Method:Add another hole to alleviate the stress concentration. • Constant: Radius of original hole = 2 in Tensile Load = 1 psi in horizontal direction • Variables: R = radius of added hole L = distance between centers of holes

  29. Reducing Stress Concentrations from Holes Finite Element Study of Structural Discontinuities, 2003

  30. Reducing Stress Concentrations from Holes Finite Element Study of Structural Discontinuities, 2003

  31. Reducing Stress Concentrations from Holes Finite Element Study of Structural Discontinuities, 2003

  32. Reducing Stress Concentrations from Holes Finite Element Study of Structural Discontinuities, 2003

  33. Reducing Stress Concentrations from Holes • Conclusion: Adding holes in a plane perpendicular to the loading direction does not reduce the stress concentration factor.

  34. Reducing Stress Concentrations from Holes Finite Element Study of Structural Discontinuities, 2003

  35. Reducing Stress Concentrations from Holes Finite Element Study of Structural Discontinuities, 2003

  36. Reducing Stress Concentrations from Holes Finite Element Study of Structural Discontinuities, 2003

  37. Reducing Stress Concentrations from Holes Finite Element Study of Structural Discontinuities, 2003

  38. Reducing Stress Concentrations from Holes Finite Element Study of Structural Discontinuities, 2003

  39. Reducing Stress Concentrations from Holes Finite Element Study of Structural Discontinuities, 2003

  40. Reducing Stress Concentrations from Holes Finite Element Study of Structural Discontinuities, 2003

  41. Reducing Stress Concentrations from Holes • Conclusion: Adding holes in a plane parallel to the loading direction does reduce the stress concentration factor.

  42. Finite Element Analysis of Cracks • Crack configuration models: Tada The Stress Analysis of Cracks Handbook Model 1 Model 2 Model 3

  43. Finite Element Analysis of Cracks Crack Model 1 (Center Cracked Plate)

  44. Finite Element Analysis of Cracks Crack Model 2 (Edge Cracked Plate)

  45. Finite Element Analysis of Cracks Crack Model 3

  46. Finite Element Analysis of Cracks Tada, The Stress Analysis of Cracks Handbook Crack Model 3

  47. Finite Element Analysis of Crack Repair • Crack repair models: Finite Element Study of Structural Discontinuities, 2003

  48. Finite Element Analysis of Cracks Center Cracked Plate with Stop Holes

  49. Finite Element Analysis of Cracks Center Cracked Plate with an Array of Holes Near the Crack Tip

  50. Finite Element Analysis of Cracks Patch Repair of Center Cracked Plate

More Related