150 likes | 253 Views
CALVERT PERFORMANCE ENGINEERING. Creators of CNC Billet Aluminum Hemi Cylinder Heads. Calvert Performance Engineering. Created by: Jason Calvert Special Thanks to the people at : www.citydata.com www.summitrealtygroup.com www.nhra.com
E N D
CALVERT PERFORMANCE ENGINEERING Creators of CNC Billet Aluminum Hemi Cylinder Heads
Calvert Performance Engineering • Created by: Jason Calvert • Special Thanks to the people at : • www.citydata.com • www.summitrealtygroup.com • www.nhra.com • www.fincad.com for allowing us to display the CAD drawing of the hemi head.
What is a Cylinder Head ? • The cylinder head is key to the performance of the internal combustion engine, as the shape of the combustion chamber, inlet passages and ports (and to a lesser extent the exhaust) determines a major portion of the volumetric efficiency and compression ratio of the engine.
What is a Hemi head? • With the hemispherical combustion chamber design, the intake and exhaust valves are usually on opposite sides of the chamber, unlike the in-line valve arrangement common to most engines with wedge-shaped combustion chambers. Therefore, significant challenges in the commercialization of hemi engines revolved around the design of the valve actuation, and how to make it effective, efficient, and reliable at an acceptable cost.
Cylinder Head Parts Breakdown • A Bare Cylinder head • Valves • Springs • Retainers • Locks
Bare Billet Aluminum Cylinder Heads • Made From 6061 billet chunk of aluminum
The other parts to make a complete assembly • Valve Spring Retainers • Valves • Valve Springs • Locks
Valves • Valves are a one peace forging from titanium, and some will be forged from inconel .We will be purchasing these from: • Victory 1 Performance in Charlotte NC • www.titaniumvalve.com
Springs, Retainers ,and Locks • The Valve Springs ,Retainers, and Locks will be purchased from : PAC RACING SPRING Southfield, MI Their Springs are made from a special alloy that was discovered by there company called PACOLOY. The retainers and locks are CNC machined from Titanium. www.pacracing.com
The New Workplace • We will be located in Indianapolis Indiana . Our new address is 6402 Corporate Drive. • It fits our needs well being close to many top racing teams within 25 miles .We will have ample room with the building having a little over 100000 square feet. We will be welcoming many new Centroid 5 axis CNC machines and other equipment as needed.
Property Highlights: State-of-the-Art facility 103,954 SF + 86,055 SF warehouse + 17,899 SF 2-story office 6 docks, 2 drive-in doors 25’ clear Warehouse has an optional 14,958 SF mezzanine Ideally located just off I-465 in Park 100 2008 ESTIMATED DEMOGRAPHICS 1 mile from site 3 miles from site 5 miles from site Population 5,057 48,464 149,145 Avg. HH Income $ 75,633 $ 64,001 $ 60,218 Households 1,978 20,310 63,374 MORE INFO