1 / 4

Target Paper Status

Target Paper Status. Summary 13 th December 2011 Chris Booth. 1 Introduction (KL) ok 2 Requirements and Overview (CB) ok 3 Linear motor (CB) 3.1 Electromagnetic design (PS/NS) missing 3.2 Stator (CB,PS) needs figs & refs

maren
Download Presentation

Target Paper Status

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Target Paper Status Summary 13th December 2011 Chris Booth

  2. 1 Introduction (KL) ok • 2 Requirements and Overview (CB) ok • 3 Linear motor (CB) • 3.1 Electromagnetic design (PS/NS) missing • 3.2 Stator (CB,PS) needs figs & refs • 3.3 Permanent magnets (CB,PS) needs figs & refs • 4 Mechanical design and construction (JT) • 4.1 Target Shaft (JT) needs figs & refs • 4.2 Target Bearings (JT) needs figs & refs • 4.3 Stator (JT) see 3.2 • 4.4 Mechanical integration (CB – are people happy?) check numbers • 4.5 Quality Assurance & Quality Control (JT, GB, PS?) magnetic missing • 5 Optical position-measurement system (CB,PS) • 5.1 Optical Vane (PS,CB) needs figs & refs • 5.2 Laser Source (PS,CB) needs figs & refs • 5.3 Optical Fibres (PS,CB) needs figs & refs • 5.4 Collimators, Lenses & Mechanical Mount (PS,CB) needs figs & refs • 5.5 Optical sensors (PS,CB) brief! • 6 Stator Operation & Power electronics (PS) lengthy! needs figs • 7 Control, Electronics & DAQ (PS) needs figs • 8 Performance (PH,AD) missing • 9 Summary (CB) missing

  3. Summary • Most of the material is now there! • CB edited some sections to improve consistency, remove history, .... More editing needed! • Most lack figures and references. • (Some figs from JT – quality may be an issue.) • Some sections missing: • EM Design: N Schofield contacted, agreed to provide. • Magnetic QA – PS listed, should be BS! • Performance: PH & AD • In absence of EMcC I wrote “mechanical integration” section (frame, jacking system, services) • Are they adequate? • Is the balance ok? • Previously decided to document design of last summer. Do we wish to update? • Said would review when present version complete.

  4. Next? • We need the missing sections! • Still inconsistencies of style (level of detail, tenses, etc.) • Propose I revise text, send list of figures (& references) required. • Need input! • Others’ views on amount of detail. • Are bullet-points acceptable? • Can we reference internal notes? • Add summary, aim for essentially complete draft early(-ish!) in New Year. • Are we agreed we leave new stator for later paper?

More Related