70 likes | 175 Views
Basic Attachments. Wire Loop. A loop is needed to attach a wire, string, or elastic. Fold a single piece of wire into a C shape. Tape onto the edge of the mask at eye level. Repeat on the other side. Nose or Ear. Cut a triangle of wire. Fold the triangle in half. Snouts.
E N D
Wire Loop • A loop is needed to attach a wire, string, or elastic. • Fold a single piece of wire into a C shape. • Tape onto the edge of the mask at eye level. • Repeat on the other side.
Nose or Ear • Cut a triangle of wire. • Fold the triangle in half.
Snouts • Cut a rectangle of wire • Cut notches into the sides, about 2/3 of the way up. • Overlap the large flaps to create a cylinder • Fold the small flap over the end of the cylinder
Orbs • Take a square of wire. • Cut notches into the middle of all four sides. • Overlap the flaps on each side to create the sphere.
Ears out of Paper • Take paper and wad it up into the desired shape. • Tape it in place so it does not shift • Attach wire on the back for stability and to attach to mask
More info at: • Elamarthistory.com • Go to art I pull down, 4th nine weeks, masks