1 / 14

IRC5 News Q4’05-Q1’06

IRC5 News Q4’05-Q1’06. Status one year after launch. Very positive reception at numerous events More than 1500 IRC5’s shipped Many successful MultiMove installations Accelerated phase-over from S4Cplus. New Modules. Single cabinet controller and process module added

mikayla-valenzuela
Download Presentation

IRC5 News Q4’05-Q1’06

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. IRC5 News Q4’05-Q1’06

  2. Status one year after launch • Very positive reception at numerous events • More than 1500 IRC5’s shipped • Many successful MultiMove installations • Accelerated phase-over from S4Cplus

  3. New Modules • Single cabinet controller and process module added • Module range enables optimization for different customer needs • Available November • ONE IRC5 family! Not different controllers nor different positioning New! dual cabinet controller single cabinet controller

  4. Single Cabinet Controller • 970 height (compared to 1370 for dual cabinet controller) • Full option range, including MultiMove • Max 2 internal I/O units (compared to 4) • Less connector space • Clean AluZinc cabinet(front still painted) • resistant to environmentalinfluence • self healing if scratched • Shipping November 900

  5. Single Cabinet Controller

  6. Inside IRC5 Single Cabinet Controller Power supply units Computer unit Panel unit (safety interface) (right inside wall) Computer UltraCap Power ON/OFF Manipulator signal interface Operator´s panel Service ports USB (option) Ethernet Drive unit section Customer (I/O) space FlexPendant connection Axis computer (right inside wall) Options: Duty Time Counter 230/120 V service outlet Power intake Motors On contactors and interface board (left inside wall) Manipulator connections Customer connections (behind optional cover)

  7. Dual Cabinet Controller • Redesigned with the same encapsulation principles as the new Single Cabinet Controller (=”Design 2006”) • Minor changes to customer spec • height increase 50 mm (for improved serviceability) • new flexible internal fastening system • new arrangement of I/O modules • Replaces the previous design in February ‘06

  8. Differentiation • Single Cabinet Controller • The ”standard” controller • Dual Cabinet Controller • Premium version for higher demands • Differentiating selling points vs. single cabinet and vs. competition • More connector space • More internal space • Distributability • Minimized height (with modules side by side) • Offers possibility to convert a MultiMove system to multiple single systems • by adding control module

  9. Process Module • Extension for more customer equipment space • Common look and feel • Fits on top of any other module (Control Module, Single Cabinet Controller, Drive Module)

  10. Other Added HW Options • November (in single cabinet controller only) • Air filter • For really bad environments • Wheels • Smart “rollerblades” design • Protection bar • Protecting operator panel from collision • Mains cable gland • Lower price if no external mains connector • Installation kit • Flexible and convenient attachement of customer equipment • February ‘06 • Flange disconnect • N.A. mains switch • Hot plug (preliminary planning) • Connect/disconnect FlexPendant without interrupting production! • All new HW options available on both cabinet variants • exception Flange disconnect: single cabinet controller only

  11. Added SW Functionality • RobotWare 5.07 (February) • Missing S4Cplus functions • e.g. stand-alone controller (including MultiMove) • Usability improvements • 1028->2048 signals • Reference calibration • SIS on all robots and axes • Application development support improvements • And more… • Plus segment/application specific functionality • Check out material from road show

  12. IRC5 Functionality Availability Quick Reference Just an overview! Not 100% complete Availabilty = shipment Rough time schedule Check out segment specific info for details

  13. MultiMove FlexPendant Software Products Remember The Four Main Messages! The #1 Robot Controller Cabinet

More Related