1 / 11

Signals by Spreadsheet

Signals by Spreadsheet. Please turn your volume control up to hear audio. Distributed Input/Output. DIO. Detectors. Digitrax: LocoBuffer USB or MS100. Signals. T. T. T. Signal. Data. Data. Data. Signal State Spreadsheets. Terminal Definitions & Names. Command Station.

mindy
Download Presentation

Signals by Spreadsheet

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Signals by Spreadsheet Please turn your volume control up to hear audio. Distributed Input/Output

  2. DIO Detectors Digitrax: LocoBuffer USB or MS100 Signals T T T Signal Data Data Data Signal State Spreadsheets Terminal Definitions & Names Command Station Track Bus NCE: USB to RS232 Converter The SBS System Architecture SBS Software on PC (or MAC) (Windows 2000, XP, or VISTA) Distributed Input/Output DIO Data Power Build Create Spreadsheet & Configure Card Run Compile Cab Bus or LocoNet (or standalone) Acc Dec Power & Information Data

  3. LED • Green = OK (Receiving Power and DCC Signal) • Red = Address Configuration Mode, Error or No DCC Signal (Try Reset Button) • Red Flash = Address Accepted (Address Configuration Mode Only) • Off = No Power • DCC Track Bus • Power • DCC Signal Reset Button A0 A1 A2 A3 A4 A5 E0 Gnd Gnd • Cab Bus Interface` • Send/Receive Data To/From Computer • “Daisy-Chain” Connectors Address Configuration Jumper (Stowed) Address Configuration Jumper (Stowed) B0 B1 B2 B3 B4 B5 B6 B7 Gnd C0 C1 C2 C3 C4 C5 C6 C7 Gnd D0 D1 D2 D3 D4 D5 D6 D7 Gnd DIO Board Features • Accessory Power • +12 to 15 V DC, unregulated. Use for Tortoise driver, etc. • +5VDC, regulated. Use for occupancy detectors, signals, LED indicators, etc. DCC T2 Vin1 T1 LED1 +12V +5V Gnd Vin2 No additional power supplies are needed! (Save $ & Effort) No additional power supply is needed!(Save $ & Effort) Ground Polarity Does Not Matter T3 PIC 16F871/40P 3” JP1 1 2 3 Configure Board Address T4 T5 T6 Mounting holes for #4 screws 5” DIO-D29 – Digitrax (29 I/O Terminals) DIO-N26 – NCE (26 I/O Terminals) 31 Input or Output Terminals (Input/Output depends on configuration)

  4. A0 A1 A2 A3 A4 A5 E0 Gnd Gnd A0 A1 A2 A3 A4 A5 E0 Gnd Gnd B0 B1 B2 B3 B4 B5 B6 B7 Gnd B0 B1 B2 B3 B4 B5 B6 B7 Gnd C0 C1 C2 C3 C4 C5 C6 C7 Gnd C0 C1 C2 C3 C4 C5 C6 C7 Gnd D0 D1 D2 D3 D4 D5 D6 D7 Gnd D0 D1 D2 D3 D4 D5 D6 D7 Gnd Connecting Ground Terminals DCC DCC T2 T2 Vin1 Vin1 T1 T1 LED1 LED1 +12V +5V Gnd +12V +5V Gnd Vin2 Vin2 T3 T3 PIC 16F871/40P PIC 16F871/40P JP1 JP1 1 2 3 1 2 3 T4 T4 T5 T5 T6 T6 When two or more DIO cards are connected to the same accessory, their GND Terminals must be connected .

  5. DIO Installed DC Power Out DIO Address DCC Track Bus In “Daisy Chained” Cab Bus Input and Output connections can be added at any time as needed.

  6. DIO Detectors Digitrax: LocoBuffer USB or MS100 Signals T T T Signal Data Data Data Signal State Spreadsheets Terminal Definitions & Names Command Station Track Bus NCE: USB to RS232 Converter The SBS System Architecture SBS Software on PC (or MAC) (Windows 2000, XP, or VISTA) Distributed Input/Output DIO Data Power Build Create Spreadsheet & Configure Card Run Compile Cab Bus or LocoNet (or standalone) Acc Dec Power & Information Data

  7. Select “Edit DIO”

  8. DIO Spreadsheet – Create New Select An Existing DIO or DIO23 DIO47 DIO52 Create A New DIO 15

  9. DIO Spreadsheet -New DIO Spreadsheet • Designate Terminal as “Active Hi” or “Active Lo” (See Tutorial) • Enter Terminal Direction: “I” (Input) or “O” (Output) • Enter Terminal Name (See “Acceptable Names” List or use “Help”) • Enter Wire Color (optional, for your documentation) • Enter Comment (optional, for your documentation) O S4WG BLU Signal 4 West Green LED Optional • Reserved Terminals • Digitrax: C6, C7 • NCE: C4, C5, C6, C7, E0 Reserved For SBS Use.

  10. SBS “Edit DIO Card” Function DIO15 • Control Panel • Select “New” or … • Select previously saved DIO Spreadsheet • Make/Edit Spreadsheet Entries • “Save” Spreadsheet • “Print” Spreadsheet • “Configure” DIO Card • “Exit” • Use “Help” at any time Unused  “I”

  11. STOP!(Absolute) SBS Equipment can be purchased on line. SBS Software can be download FREE of charge. Go To: www.SignalsBySpreadsheet.com Next Suggested Tutorial: “Test DIO Card” Thank you for your interest and attention!

More Related