1 / 9

WI Natural Resources Board January 2019 Webcast

WI Natural Resources Board January 2019 Webcast. For Adoption of AM-18-13. Revisions to Lithographic Printing Rules ss. NR 422.142 and 422.143. Rule Background. Reasonable Available Control Technology (RACT)

nancysantos
Download Presentation

WI Natural Resources Board January 2019 Webcast

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. WI Natural Resources BoardJanuary 2019 Webcast AGENDA ITEM # 2A2 Kristin Hart – Air Permit and Stationary Source Modeling Section Chief

  2. For Adoption ofAM-18-13 Revisions to Lithographic Printing Rules ss. NR 422.142 and 422.143 AGENDA ITEM # 2A2 Kristin Hart – Air Permit and Stationary Source Modeling Section Chief

  3. Rule Background Reasonable Available Control Technology (RACT) • RACT rules are required by the Federal Clean Air Act and are technology based air pollution standards applicable to specific types of facilities • RACT rules to control volatile organic compounds (VOCs) must be promulgated when an area is designated nonattainment for ozone • Part 1 Lithographic Printing RACT -NR 422.142 • VOC RACT Rule for 1979 Ozone standard • Part 2 Lithographic Printing RACT - NR 422.143 • VOC RACT Rule for 1997 Ozone standard AGENDA ITEM # 2A2 Kristin Hart – Air Permit and Stationary Source Modeling Section Chief

  4. Current Rule Applicability : Part 1 AGENDA ITEM # 2A2 Kristin Hart – Air Permit and Stationary Source Modeling Section Chief

  5. Current Rule Applicability : Part 1 : Part 1 and Part 2 AGENDA ITEM # 2A2 Kristin Hart – Air Permit and Stationary Source Modeling Section Chief

  6. Goals of Rule Revision Considering input from stakeholders, a rule scope was developed to address the following • Simplify and clarify rule applicability • Most printing facilities are subject to both Parts 1 and 2. Parts are similar, but not identical • Address other stakeholder concerns • Address inconsistencies in definitions • Clarify control device requirements • Address stack testing frequency for small printers AGENDA ITEM # 2A2 Kristin Hart – Air Permit and Stationary Source Modeling Section Chief

  7. Summary of Revisions • Simplified and clarified applicability • Existing printers in Manitowoc and Kewaunee are subject to Part 1 only • Existing printers in remaining 7 counties are subject to Part 2 only • Any new printer locating in the 9 county area is subject to Part 2 only • Any printer in a future nonattainment area will be subject to Part 2 only AGENDA ITEM # 2A2 Kristin Hart – Air Permit and Stationary Source Modeling Section Chief

  8. Applicability after Rule Revision : Existing Printers - Part 1 : Existing Printers - Part 2 : New Printers - Part 2 AGENDA ITEM # 2A2 Kristin Hart – Air Permit and Stationary Source Modeling Section Chief

  9. Summary of Revisions • Addressed other stakeholder concerns • Revised definitions to be internally consistent • Clarified temperature and recordkeeping requirements for operation of control devices • Reduced stack testing frequency for small printers AGENDA ITEM # 2A2 Kristin Hart – Air Permit and Stationary Source Modeling Section Chief

More Related