220 likes | 367 Views
DEVELOPED BY CUTTER AVIATION IN PARTNERSHIP WITH GARMIN. YOUR MERIDIAN. MODERNIZED. THE OLD. PIPER MERIDIAN WITH MEGGITT PANEL. YOUR MERIDIAN. MODERNIZED. THE NEW. THE GARMIN G950 RETROFIT PANEL. YOUR MERIDIAN. MODERNIZED. THE OLD. PIPER MERIDIAN WITH AVIDYNE PANEL.
E N D
YOUR MERIDIAN. MODERNIZED. THE OLD. PIPER MERIDIAN WITH MEGGITT PANEL
YOUR MERIDIAN. MODERNIZED. THE NEW. THE GARMIN G950 RETROFIT PANEL
YOUR MERIDIAN. MODERNIZED. THE OLD. PIPER MERIDIAN WITH AVIDYNE PANEL
YOUR MERIDIAN. MODERNIZED. THE NEW. THE GARMIN G950 RETROFIT PANEL
SEE OUR DEMONSTRATOR HERE Our Garmin G950 demonstrator, N950G, is on display throughout the MMOPA Convention at the Colorado Springs Airport. The completely refurbished 2001 Piper Meridian was originally a Meggitt-equipped model, but has had the Three-Display Garmin G950 installed to replace it. The Garmin G950 Demonstrator will be displayed on the MMOPA Ramp on Tuesday, Wednesday, and Saturday for Arrivals / Departures and will be on display at the Cutter Aviation FBO on Thursday and Friday (just North of the MMOPA Ramp) for display. It is open to the public, so please visit! Call David Groppenbacher at 480-203-5120 or Michael Hedding at 816-807-1733 for a scheduled visit time. G950.CUTTERAVIATION.COM
FULLY INTEGRATED The Garmin G950 is a fully-integrated package with all flight data, communication, navigation, engine data, and systems data displayed and controlled completely through the G950. It is a true UPGRADE with no compromises. G950.CUTTERAVIATION.COM
AUTOPILOT INTEGRATION The Garmin G950 is fully integrated with your existing S-TEC 1500 Magic / Intelliflight Autopilot – with no loss of capabilities or functionality. There’s no need to learn a new autopilot system or absorb the added cost of a new autopilot. G950.CUTTERAVIATION.COM
GENEROUS PFD / MFD DISPLAYS The Garmin G950 features the generous 12-inch displays of the Garmin GDU 1240A PFD and MFD Units – creating a clean, seamless display from left to right. In total, it has more glass panel space than any other Meridian – a full 7” more than new Piper Meridians. G950.CUTTERAVIATION.COM
MODERN EFIS INTERFACE The Garmin GCU 476 Keypad is installed as standard for easier input of information and programming of the EFIS system. This feature is found as factory-installed on all new Piper Meridians. G950.CUTTERAVIATION.COM
TWO-DISPLAY INSTALLATION The Garmin G950 can be installed with a single 12” Primary Flight Display (PFD) unit on the left side with a single 12” Multi-Function Display (MFD) unit in the center of the panel in the Two-Display installation. G950.CUTTERAVIATION.COM
TWO-DISPLAY INSTALLATION STANDARD EQUIPMENT • New Custom Engineered Two-Display Instrument Panel • Garmin GDU 1240A 12” (PFD) Primary Flight Display • Garmin GDU 1240A 12” (MFD) Multi-Function Display • Dual (2) Garmin GRS 77 Attitude & Heading Reference Systems (AHRS) • Dual (2) Garmin GIA 63W Remote GPS/NAV/COMMS • Garmin GMA 350 Audio Control Panel • Garmin GTX 33ES Remote Mode S Transponder with Extended Squitter • Garmin GDC 74A Air-Data Computer • Garmin GEA 71 Engine and Airframe Interface Units • Garmin GCU 476 FMS Control Panel • Garmin GWX 68 Weather Radar • Dual (2) Garmin GMU 44 Magnetometers • Garmin GTP 59 OAT Probe • Garmin GA 36 WAAS Antenna • Garmin GA 37 WAAS Antenna • Autopilot SB-08-005R2 WAAS Upgrade The list at the right is the Standard Equipment as installed for the Two-Display installation of the Garmin G950. G950.CUTTERAVIATION.COM
TWO-DISPLAY INSTALLATION AVAILABLE OPTIONS • Garmin Class “B” TAWS • Garmin ChartView by Jeppesen • Garmin Synthetic Vision Technology (SVT) PFD System • L-3 Communications TRILOGY Electronic Standby Instrument (ESI) • Garmin GDL 69A Satellite Data Link Weather/XM Radio • Garmin GRT 10 Remote Control and Transceiver Kit • Garmin GSR 56 Global Weather, Talk, Text and Enroute • Garmin GDL 59 Data Logger & Wi-Fi Data Link • Garmin GTS 820 Traffic System Plan for the future with your G950 Installation!The list at the right is the list of Available Options that may be added to an installation for the Two-Display installation of the Garmin G950. Synthetic Vision Technology (SVT) L-3 TRILOGY Electronic Standby (ESI) G950.CUTTERAVIATION.COM
MMOPA SPECIAL INCENTIVE Special Limited-Time MMOPA Incentive Get $30,000 of options FREE by purchasing before September 22! • Reserve a position and place a deposit for a G950 installation on your aircraft before the end of the MMOPA Convention (September 22) and get the options package below, a $30,000 value, installed for free! • Garmin ChartView by Jeppesen • Garmin Synthetic Vision Technology (SVT) PFD System • Garmin GRT 10 Remote Control and Transceiver Kit Get Synthetic Vision Technology (SVT) added FREE as well as Garmin ChartViewand the Garmin GRT 10 if you schedule your install before September 22nd! This is a LIMITED-TIME Offer, so ASK US NOW about it and get an early installation position as well! G950.CUTTERAVIATION.COM
THREE-DISPLAY INSTALLATION The Garmin G950 can be installed with dual 12” Primary Flight Display (PFD) units on both the pilot and co-pilot side with a single 12” Multi-Function Display (MFD) unit in the center in the Three-Display installation. G950.CUTTERAVIATION.COM
THREE-DISPLAY INSTALLATION STANDARD EQUIPMENT • New Custom Engineered Three-Display Instrument Panel • Dual (2) Garmin GDU 1240A 12” (PFD) Primary Flight Displays • Garmin GDU 1240A 12” (MFD) Multi-Function Display • Dual (2) Garmin GRS 77 Attitude & Heading Reference Systems (AHRS) • Dual (2) Garmin GIA 63W Remote GPS/NAV/COMMS • Garmin GMA 350 Audio Control Panel • Dual (2) Garmin GTX 33ES Remote Mode S Transponder with Extended Squitter • Dual (2) Garmin GDC 74A Air-Data Computer • Garmin GEA 71 Engine and Airframe Interface Units • Garmin GCU 476 FMS Control Panel • Garmin GWX 68 Weather Radar • Dual (2) Garmin GMU 44 Magnetometers • Dual (2) Garmin GTP 59 OAT Probe • Garmin GA 36 WAAS Antenna • Garmin GA 37 WAAS Antenna • Autopilot SB-08-005R2 WAAS Upgrade The list at the right is the Standard Equipment as installed for the Three-Display installation of the Garmin G950. G950.CUTTERAVIATION.COM
THREE-DISPLAY INSTALLATION AVAILABLE OPTIONS • Garmin Class “B” TAWS • Garmin ChartView by Jeppesen • Garmin Synthetic Vision Technology (SVT) PFD System • L-3 Communications TRILOGY Electronic Standby Instrument (ESI) • Garmin GDL 69A Satellite Data Link Weather/XM Radio • Garmin GRT 10 Remote Control and Transceiver Kit • Garmin GSR 56 Global Weather, Talk, Text and Enroute • Garmin GDL 59 Data Logger & Wi-Fi Data Link • Garmin GTS 820 Traffic System Plan for the future with your G950 Installation!The list at the right is the list of Available Options that may be added to an installation for the Three-Display installation of the Garmin G950. Synthetic Vision Technology (SVT) L-3 TRILOGY Electronic Standby (ESI) G950.CUTTERAVIATION.COM
MMOPA SPECIAL INCENTIVE Special Limited-Time MMOPA Incentive Get $30,000 of options FREE by purchasing before September 22! • Reserve a position and place a deposit for a G950 installation on your aircraft before the end of the MMOPA Convention (September 22) and get the options package below, a $30,000 value, installed for free! • Garmin ChartView by Jeppesen • Garmin Synthetic Vision Technology (SVT) PFD System • Garmin GRT 10 Remote Control and Transceiver Kit Get Synthetic Vision Technology (SVT) added FREE as well as Garmin ChartViewand the Garmin GRT 10 if you schedule your install before September 22nd! This is a LIMITED-TIME Offer, so ASK US NOW about it and get an early installation position as well! G950.CUTTERAVIATION.COM
SEE OUR DEMONSTRATOR HERE Our Garmin G950 demonstrator, N950G, is on display throughout the MMOPA Convention at the Colorado Springs Airport. The completely refurbished 2001 Piper Meridian was originally a Meggitt-equipped model, but has had the Three-Display Garmin G950 installed to replace it. The Garmin G950 Demonstrator will be displayed on the MMOPA Ramp on Tuesday, Wednesday, and Saturday for Arrivals / Departures and will be on display at the Cutter Aviation FBO on Thursday and Friday (just North of the MMOPA Ramp) for display. It is open to the public, so please visit! Call David Groppenbacher at 480-203-5120 or Michael Hedding at 816-807-1733 for a scheduled visit time. G950.CUTTERAVIATION.COM