90 likes | 214 Views
IEEE 802 Wireless Coexistence Study Group Update. Jim Lansford Jim.Lansford@mobilian.com (405) 377-6170. Sydney Interim Meeting Monday evening. Update for Sydney meeting. SEC conference calls held between meetings Refine mission statement Discussion of goals for anticipated TAG
E N D
IEEE 802 Wireless Coexistence Study Group Update Jim Lansford Jim.Lansford@mobilian.com (405) 377-6170 Sydney Interim Meeting Monday evening Jim Lansford, Mobilian Corporation
Update for Sydney meeting • SEC conference calls held between meetings • Refine mission statement • Discussion of goals for anticipated TAG • Definition of Coexistence • Goals for Sydney meeting • Broader feedback • Further refinement of mission statement and goals • Finalize mission statement and charter • Proposed definition of coexistence • Start work on organization and voting rules • Prep for Vancouver plenary • Meets Monday PM @ 6:30 (w/TG2), Wed @1-3 Jim Lansford, Mobilian Corporation
Tasks the SG/TAG needs to accomplish • Develop Mission Statement (SG ongoing) • Statement of purpose (Recommend to ExCom how IEEE 802 should address coexistence in existing and future specs) (SG ongoing) • Definition of coexistence (TAG) • Summary of current standards where coexistence is an issue (TAG) • Recommendations to SEC (SG July Plenary) • Summary and report (SG July Plenary) Jim Lansford, Mobilian Corporation
Mission Statement (Based on feedback from 1 May conference call) • The IEEE 802 Coexistence Technical Advisory Group (TAG) has the following missions: • The COEX TAG develops and maintains the IEEE 802 policy for establishing coexistence between Standards. • The COEX TAG develops and maintains guidelines for the communications industry to foster coexistence. • The COEX TAG evaluates the coexistence issues between IEEE 802 PARs and Draft Standards, and makes recommendations to the IEEE 802 Executive Committee. Jim Lansford, Mobilian Corporation
Coexistence Definition • Coexistence: The ability of one system to perform a task in a given shared environment where other systems have an ability to perform their tasks and may or may not be using the same set of rules. • Coexistence is quantified by degradation (simulated or measured) under a set of usage model assumptions, which must be defined for coexisting systems Jim Lansford, Mobilian Corporation
Q&A #1 • Will this group try to “quantify” coexistence? • Not likely – coexistence depends on so many variables (geometry, power, etc.) that defining a number that says whether you have achieved it or not isn’t practical. • What will this group do then? • We currently don’t have a policy for addressing coexistence; that’s first. This policy will address the ground rules for analyzing the degradation two systems cause to each other (or pairs of systems for multiple standards). Jim Lansford, Mobilian Corporation
Q&A #2 • How would this work? • The TAG first defines policy. For example, the policy might be to say a WG needs to pick five usage models and determine the degradation due to a set of other approved standards, pairwise. We want to examine most likely scenarios, not corner cases, which may give pathological results. • So how would you know if two systems “coexist”? • The TAG is an advisory group to SEC; analysis using the usage models would be used by WGs and SEC to make informed decisions. This is a similar concept to the FCC’s OET. So the answer is that the TAG procedures will either convince voters that a Recommended Practice is needed, or that a draft has no coexistence issues and can proceed to further balloting. Jim Lansford, Mobilian Corporation
Q&A #3 • Does the TAG play a role other than formulating policy? • Possibly. The current thinking is that the COEX TAG develops a definition of coexistence and a policy to guide WG’s analysis of coexistence. Beyond that, the TAG may be called upon to help resolve coexistence conflicts by writing an independent report when a draft is submitted to SEC, but this has not been agreed upon. • What about participation and voting? • A TAG is governed by the same attendance and voting rules as WG’s, but the specifics are not finalized. Jim Lansford, Mobilian Corporation
Proposed Operation • The Coexistence TAG is responsible for defining the meaning of coexistence within the IEEE 802 context. • The Coexistence TAG will develop the guidelines by which WGs establish whether a given TG coexists. • Uses official definition • Uses usage models • Uses modeling and/or measurements • Recommends creation of a TG to develop a Recommended Practice, if needed (a la 802.15.2) • The Coexistence TAG will publish guidelines by which the industry can evaluate coexistence. • The Coexistence TAG is responsible for reviewing all proposed wireless PARs • Like FCC/OET, evaluates PARs and highlights those that may require a Recommended Practice • Summary report to be voted on by TAG • Summary report presented to SEC • SEC members take this summary under advisement • This TAG is responsible for generating a final review report of the Draft Standard prior to Sponsor Ballot • TAG should begin work when the first WG ballot is published • Preliminary report should be issued to SEC within 40 days • Must be voted on by TAG • Must be ratified by SEC • SEC can require creation of a TG to write Recommended Practice Jim Lansford, Mobilian Corporation