140 likes | 321 Views
2. Objectives. At the end of the training the student will be able to:Recall DOT/PHMSA regulatory agency organization at a high level.Describe the impact of changing OQ requirements at a high level.Describe the BPXA DOT Operator Qualification Plan expectations of Contractors.Review this present
E N D
1. BPXA Operator Qualification Plan High Level Overview Lesson � for Contractors Rev 4/14/2010 Duration ~ 5 minutes
2. 2 Objectives At the end of the training the student will be able to:
Recall DOT/PHMSA regulatory agency organization at a high level.
Describe the impact of changing OQ requirements at a high level.
Describe the BPXA DOT Operator Qualification Plan expectations of Contractors.
Review this presentation and then complete the Acknowledgement Form at the end of the presentation and give it to your supervisor for routing to BPXA
3. 3 Why Do We Have an Operator Qualification Regulation? Many pipeline accidents or incidents nation-wide
In some cases individuals were not adequately qualified
Some consequences of these accidents included:
Loss of product
Harm to the environment
Harm to equipment
Reduced operational reliability
Higher costs for transportation
People getting hurt
Death
4. 4 Who Regulates Operator Qualification?
5. 5 OQ Rule Timeline - Background
6. 6 Intent of the Rule Help ensure a qualified workforce
Reduce the probability and consequence of incidents caused by human error.
A few of the requirements of the rule are:
Written qualification program.
Ensure through evaluation that individuals performing covered tasks are qualified.
7. 7 Covered Task Performer General Responsibilities Some general responsibilities for individuals performing covered tasks are listed in the following slides.
If you perform covered tasks on a DOT jurisdictional pipeline you must be qualified in accordance to the BPXA OQ Plan which generally includes:
Successful completion of General Abnormal Operating Conditions training which is available on the Oil Industry Toolbox.
Successful completion of an evaluation by an approved qualification provider. Your company chose a provider from a BPXA approved list of providers.
Documentation of evaluation being properly filed in ISNetworld.
You may perform covered tasks if you are not OQ qualified only if you are directed and observed by an OQ qualified individual. This qualified individual must adhere to the Span of Control requirements. Those requirements are listed on the next slide.
Documentation and evaluation are probably the most sensitive activities that can affect the credibility of the OQ Program. It is important that the Evaluator follow the OQ Plan and the flow set out in this training. The Evaluator has direct effect on both qualification documentation and the evaluation process.
In the next set of slides we will get into more detail about Evaluator activities.
Documentation and evaluation are probably the most sensitive activities that can affect the credibility of the OQ Program. It is important that the Evaluator follow the OQ Plan and the flow set out in this training. The Evaluator has direct effect on both qualification documentation and the evaluation process.
In the next set of slides we will get into more detail about Evaluator activities.
8. 8 Covered Task Performer General Responsibilities BPXA will allow individuals (including employees and contractors) that are not qualified, to perform a covered task for BPXA within the span of control parameters, provided the following conditions are met:
The non-qualified individual(s) must be directed and observed by an individual that is qualified in that specific covered task.
The qualified individual has no obstructions or excessive distance between the non-qualified individual(s) and the qualified individual, which would impede the qualified individual�s ability to directly observe and take immediate corrective action.
A qualified individual may direct and observe more than one non-qualified individual performing different covered tasks. If the covered tasks are happening simultaneously the qualified individual must adhere to the most restrictive span of control for a given task. For example, if one of the tasks has a span of control ratio of 1:5 and the other has a span of control ratio of 1:2, the qualified individual could only direct and observe two unqualified individuals doing any combination of the two covered tasks.
The ratio of qualified individuals to non-qualified individuals (span of control) is listed in the Covered Task List in ISNetworld. Documentation and evaluation are probably the most sensitive activities that can affect the credibility of the OQ Program. It is important that the Evaluator follow the OQ Plan and the flow set out in this training. The Evaluator has direct effect on both qualification documentation and the evaluation process.
In the next set of slides we will get into more detail about Evaluator activities.
Documentation and evaluation are probably the most sensitive activities that can affect the credibility of the OQ Program. It is important that the Evaluator follow the OQ Plan and the flow set out in this training. The Evaluator has direct effect on both qualification documentation and the evaluation process.
In the next set of slides we will get into more detail about Evaluator activities.
9. 9 Other Responsibilities
10. 10 Lesson Summary
11. 11 Acknowledgement
12. End
13. 13 Revision Log