1 / 2

Timer Circuit (timed light)

Timer Circuit (timed light). 1. Is this an Astable or Monostable circuit? 2. Which two components control the time delay? 3. What is D1 and what does it do? 4. What is D2 and what does it do? 5. How could you identify where pin 1 is on a 555 IC chip?

nuwa
Download Presentation

Timer Circuit (timed light)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Timer Circuit (timed light) 1. Is this an Astable or Monostable circuit? 2. Which two components control the time delay? 3. What is D1 and what does it do? 4. What is D2 and what does it do? 5. How could you identify where pin 1 is on a 555 IC chip? 6. Why should an IC socket be used to assemble the 555 IC to the PCB? 7. What sort of switch is SW2? 8. Which pin is the output? 9. Which pin is the trigger? 10. Which are the timing pins?

  2. Monostable circuit Fill in the missing words or value: • If the output (pin 3) is 0 then the LED will be _____________. • When switch SW2 is pressed, a signal is sent to the t__________ (pin ____) causing the output (pin 3) to go h_____ and the LED switches ______. If a 9V battery is used, the actual voltage at pin 3 will be ______V. • When the circuit is switched on, the voltage between pin 8 and the 0V rail will be _________. • When on, the resistance between pins 6 and 7 will be _________. • When the voltage at the threshold (pin 6) reaches _____ of the input voltage supply, the output (pin 3) returns to 0 and the LED switches off. The capacitor is emptied by the discharge (pin ______). • The time delay that the LED stays on is controlled by components ______ and ________. 7. Calculate the time delay for the timed light circuit:

More Related