1 / 21

Detector Studies in Asia

Detector Studies in Asia. T.Tauchi, Prague Ecfa/Desy Workshop Session on Detector Plenary Reports Sunday, 17 November 2002. Configuration of the JLC detector. Interaction Region and fast feedback system. 24. 18. 60. VTX detector design.

palti
Download Presentation

Detector Studies in Asia

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Detector Studies in Asia T.Tauchi, Prague Ecfa/Desy Workshop Session on Detector Plenary Reports Sunday, 17 November 2002

  2. Configuration of the JLC detector

  3. Interaction Region and fast feedback system

  4. 24 18 60 VTX detector design N.Tamura, G.Iwai, K.Fujiwara, H.Takayama; Niigata University Y.Sugimoto, A.Miyamoto ; KEK T. Aso ; Toyama National College of Maritime Technology K.Abe ; Tohoku Gakuin Univ. • Baseline design • |cos | < 0.90 • Pixel size 25 mm • 1.25cm x 5cm x 330mm • 4Layers with 10 deg tilt( r=24,36,48,60 mm)( Ladder 16/24/32/40)(Sensor 2/3/4/5) • Intrinsic resolution 4 mm(Just for a simulation input )

  5. N.Tamura, Japan-UK meeting, Nov.2002 VTX/CCD status and future plans • Goal --- CCD operation at room temperature • Radiation hardness : No problem, so far. • But, further investigation is necessary.Electrons => Higher energy must be studied experimentally. ( Experiment will be conducted in this December, Ee=100MeV. )Neutrons => Yield of neutron is ambiguous ( beam dump ) ( Reliable simulation with precise geometry, JUPITER) • Spatial resolution : < 3mm at -15oC. • More investigation of charge sharing property improve resolution? ( Laser scanner test at Niigata Univ. with 2x2mm2 spot.) • Readout electronics: Evaluating • Study the effect of fast readout(20MHz) for irradiated samples • Evaluation of thinned device • Partially thinned CCD (Shoji-structure) ..

  6. Intermediate Tracker H. Park, Y.J. Kim, D.H. Shim (CHEP, Kyungpook National Univ.) J.M. Yang , I.H. Park, M.Y. Kim, N.H. Park (Ewha Womans Univ.) J.S. Kang, B.Y. Han, G.B. Yu, H.C. Ha (Korea Univ.) 5 layers at r=9 to 37 cm angular coverage |cos q|<0.9 spatial resolution = 40mm thickness of a layer: 0.6% radiation length Linking performance of VTX to CDC without background hits with background hits Efficiency Purity Efficiency Purity No IMT 71.6% 72.5% 71.1% 73.3% With IMT 91.7% 94.4% 90.2% 94.1% For e+e- -> hZ at Ecm=300GeV

  7. Central Tracker (CDC) KEK , Kinki University, Mindanao State University, Tokyo University of Agriculture & Technology, University of Tsukuba • Jet type chamber with long wires (3.1(4.6)m) at B=3 (2)T Momentum resolution:d(1/pt)=3 (1) x 10-4/(GeV/c) sz(stereo wires)=1mm, s2track (rf)=2mm,st=2nsec AVU AVU AVU A

  8. Spatial resolution 2 track separation efficiency 1 0.8 0.6 0.4 0.2 0 CDC Performances 1 2 3 4 5 mm Momentum resolution CDC: sPt/Pt=3 x 10-4 Pt (GeV/c) CDC+VTX: sPt/Pt=0.9 x 10-4 Pt (GeV/c)

  9. CalorimeterKEK, Kobe, Konan, Niigata, Shinshu and Tsukuba Tile/Fiber Sampling Calorimeter • Hardware Compensation • Design Flexibility • Reasonable cost • Well-established thechnology • Sufficient granularity for EMCAL ? Scintillator tiles of 5 x 5

  10. CAL: Basic Parameters

  11. R & D on EMCAL and SHmax EMCAL : Scint. tile of 4cm x 4cm x 1mmt (4cm is limited by fiber curvature) Scint.strip of 1cm x 20cm x 2mmt fine granularity crossed-strip layout like Shmax needs multi-channel photo detectors ghost-rejection capability (full simulation) SHmax: Scint.strip of 1cm x 20cm x 1cmt WLS fiber+multi-channel photon detector high-gain APD attached directly at the end of Scint. strip Scint. Tile with WLS fiber Scint. Strip with WLS fiber

  12. Y. Fujii for ECFA-DESY at Prague, 2002-Nov-17 Beam Tests of EMCAL EMCAL 1) Tile of 4cm x 4cm (7.1Xo) 2) Strip Arrays (x,y) of1cm-width Sub-system R&D a) SHmax:direct-attached APD and WLS-readout. b) Super-multi-channel photo -detectors. Present status and future plans 1st exp. just finished on Nov.14 for 1(partial), 2, and a. 2nd exp in November 2003 with 1(full) and b. Setup of beam test at KEK-p2

  13. SHmax (conventional & direct-APD)

  14. JSF, A.Miyamoto

  15. JSF interactive, A.Miyamoto

  16. JUPITER figures T.Aso RF view of VTX CDC 10 layers 36~108cells / layer 5 wires / layer rwire=15mm Event display of e+e-→ Z0h E = 350GeV

  17. Simulation of Beam Delivery System University of Tokyo Geometry codes are generated from a SAD file for FFIR optics Particle transportation from the entrance of FF to IP have been confirmed using Geant4

  18. H. Yamaoka, 5th ACFA-LC workshop July 10 - 12, 2002 Support tube R&D

  19. H. Yamaoka, 5th ACFA-LC workshop July 10 - 12, 2002 Support tube R&D status

  20. H. Yamaoka, 5th ACFA-LC workshop July 10 - 12, 2002 Support tube R&D : Test conf. 4 Conf.4 Conf.3

  21. Near Future Plans VTX:Radiation (bulk damage) test by 100MeV e’s fast electronics (20MHz) IMT: prototype manufacturing and test CDC: Investigation of wire creeping evaluation of performance by full simulation CAL: EM-CAL(4cm tile & 1cm strip) beam test SHMAX(1cm x 20cm x 1cmt / fiber) beam test granularity and energy resolution studies IR:Optimization of L* ( 3 ~4.3m) and BDS Background study with a fast feedback system prototype study on the support tube (nm stability) Software: JSF development (C++ language) ( JUPITER for full simulation based on GEANT4) Comprehensive evaluation of detector performance “Roadmap”Symposium will be held on 15 February,2003.

More Related