1 / 5

Here’s the flange for the robot. Note colors for locations of pins on interface plate.

Here’s the flange for the robot. Note colors for locations of pins on interface plate. Red - Anvil Pin Blue - Other Pins Orange - Spring Pin.

qabil
Download Presentation

Here’s the flange for the robot. Note colors for locations of pins on interface plate.

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Here’s the flange for the robot. Note colors for locations of pins on interface plate. Red - Anvil Pin Blue - Other Pins Orange - Spring Pin

  2. Here’s the new interface plate. Colors match previous picture. All are 10 mm high, which is also the depth of control pin hole. This is the most shallow hole in the flange. Red - Anvil Pin Blue - Other Pins Orange - Spring Pin

  3. This is an overhead view of the flange and interface plate together. Colors are the same again. Blue pins locate the interface plate to the plane of the flange and the red pin constrains rotation. The orange device is a spring pin to pre-load the other pins and hold the plate in place. Interface plate Light gray circles are features on the tool flange. Two black circles are edges of flange and interface plate. Flange Red - Anvil Pin Blue - Other Pins Orange - Spring Pin

  4. Dimensions of Spring Pin and General Setup Lpin = Lfull + Lrel + Lforce Lf = Lfull + Lrel + ½*Lforce Lin = Lrel + Lforce Lin≤ 8 mm Flange Lforce ANVIL Dfull PIN Lin Drel Lrel Lf Lpin Dfull Lfull Interface Plate

  5. Actual Deformation of Spring Pin 10 mm Deflection y is set at an initial default: Y= ½*(Dfull-Drel) F Flange ANVIL PIN Interface Plate

More Related