1 / 49

Configuration Design part 3

Configuration Design part 3. Engine Placement. ENGINE PLACEMENT. Factors to be considered: Effect of power changes or power failures on Stability & Control. Drag of the proposed configuration. Weight & Balance considerations.

quamar-sexton
Download Presentation

Configuration Design part 3

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Configuration Design part 3 Engine Placement

  2. ENGINE PLACEMENT Factors to be considered: • Effect of power changes or power failures on Stability & Control. • Drag of the proposed configuration. • Weight & Balance considerations. • Inlet requirements and resulting effect on installed thrust and efficiency. • Accessibility and maintainability.

  3. ENGINE PLACEMENT: Propeller-Driven AC • Option 1: Engines placed along fuselage centerline. Pros: • No thrust asymmetry in the event of engine failure. Cessna Skymaster • High thrust line. Dornier CD-2 Seastar • Important for amphibian ac.

  4. Cessna Skymaster

  5. Dornier CD-2 Seastar

  6. ENGINE PLACEMENT: Propeller-Driven AC • Option 2: Engines placed symmetrically on the wing King Air Pros: • Most attractive aerodynamically & structurally. • Prop slipstream has favorable effect on stall (built-in safety against stall) • Prop slipstream increases L, especially when TE flaps are employed.

  7. Beech King Air

  8. ENGINE PLACEMENT: Propeller-Driven AC • Option 2: Engines placed symmetrically on the wing Cons: • Engine failure may cause high windmilling D before prop is feathered. Induced YM and PM present control problems especially during TO. • Variation of engine power changes the downwash on the tail NB:If props are placed behind the wing, prop plane must be at least 0.5 c behind the TE to avoid vortex excitation from the flaps or the TE onto prop blades! (GP-166, B-36 : prop fatigue, broken blades)

  9. Piaggio GP-166 Avanti

  10. B-36

  11. ENGINE PLACEMENT: Propeller-Driven AC • Pusher vs. Tractor Pusher Pros: • Stabilizing tendency in both pitch and yaw when compared to tractors. This feature can result in reduced tail surface requirements. • Lower cabin interior noise.

  12. ENGINE PLACEMENT: Jet AC Intake requirements: Must • Provide const. airflow at different engine settings and flight conditions. • Limit flow distortion and turbulence at the compressor face. • Have short length, otherwise increased W and p-loss. Must not • Change excessively the direction of the oncoming air at different aoa. • Allow the wake of a partially stalled wing to enter the inlet duct (i.e., wing LE is unsuitable for intake location) • Generate unstable flow in sideslipping (air oscillating instead of entering the duct; problem with split intakes). • Have pronounced curvature.

  13. ENGINE PLACEMENT: Single Engine Jet ACengine mounted inside the fuselage Problem: Intake & exhaust duct location Solutions 1.1 Pitot Type Intake Fokker S-14, MIG-17 Pro: Provides the engine w. undisturbed flow for all flight conditions Con: Requires long inlet duct, which generally has to be divided at the level of the cockpit – low intake efficiency

  14. Fokker S-14 MIG-17

  15. ENGINE PLACEMENT: Single Engine Jet AC 1.2 Wing Root InletHawker Hunter Con: Difficult to meet the intake requirements (i.e., supply the engine with the required airflow at different intake velocities) and cope w. changes in aoa & aos. An additional constraint is that the local airfoil shape must not be modified excessively.

  16. Hawker Hunter

  17. ENGINE PLACEMENT: Single Engine Jet AC 1.3 Side Inlets (Scoop Type)X-35 JSF Problems: • Additional D. To minimize this D, the airscoops must not be too short and must be well faired. • A divertor is needed to prevent the fuselage BL from entering the duct but this also increases D. • The inlet opening must be located far ahead of the wing to avoid interference and excessive variations in the intake conditions.

  18. ENGINE PLACEMENT: Single Engine Jet AC 1.4 Top Inlets Miles Student, North American YF-107A Problem: The opening must be raised far above the fuselage to avoid BL and wake ingestion at large aoa.

  19. Miles Student Experimental Jet

  20. North American YF-107A

  21. ENGINE PLACEMENT: Single Engine Jet AC 1.5 Split Bottom Inlet North American Rockwell Buckeye Pro: Attractive for mid-wing and high-wing ac Con: Measures must be taken to avoid ingestion of debris during taxiing and TO.

  22. North American Rockwell Buckeye

  23. ENGINE PLACEMENT: Single Engine Jet AC Exhaust requirements: Must • Be as short as possible; exhausts cause T-loss = 0.3% per ft-length or 1% per m-length. 2 tail-booms can be used for this purpose, offering the additional advantage of excellent engine accessibility. Must not • Not allow the hot jet efflux to impinge on the ac structure; for M<1 in parallel flow, the expanding gases form a cone with semi-apex angle = 6 deg.

  24. ENGINE PLACEMENT: Single Engine Jet AC 1.6 Rear End ExhaustF-16 Pro: Keeps efflux away from the ac w/o any special precautions Cons: • Structural problems • Complicated fairings must be used around the exhaust

  25. F-16

  26. ENGINE PLACEMENT: Single Engine Jet AC 1.7 Split ExhaustHawker Sea Hawk Cons: • Structural problems • Complicated fairings must be used around the exhaust

  27. Hawker Sea Hawk

  28. ENGINE PLACEMENT: Multi Engine Jet AC 2.1 Engines buried entirely within the wing root De Havilland Comet, Avro Vulcan, Vickers Valiant, Handley Page Victor, Tupolev 104 Pros: • Low D. • Better maneuvering capabilities as a result of the low W/S (larger S) and low CL in cruise. Also, no compressibility problems such as buffeting. • Smaller nose-up pitching moment due to sweep angle because of the low AR. • Better low speed performance due to the low W/S. • Better from the aeroelastic point of view because the low R wing box structure offers greater stiffness. • If LFC is used (ex. BL suction), low T engines integrated inside the fuselage of the wing in combination with a low W/S may be used.

  29. De Havilland Comet

  30. Avro Vulcan

  31. Vickers Valiant

  32. Handley Page Victor

  33. Tupolev 104

  34. ENGINE PLACEMENT: Multi Engine Jet AC 2.1 Engines buried entirely within the wing root Cons: • Accessibility to the engines: Detachable skin panels are necessary at a location where the wing is highly stressed. • Safety: In the event of an engine fire the likelihood that the fire will spread to the fuel stored in the wing is great.

  35. ENGINE PLACEMENT: Multi Engine Jet AC 2.2 Pod-Mounted Engines Pros: • Safety: in the event of an engine fire the likelihood that the fire will spread to the fuel is limited (main argument for the choice of the B-47 configuration) • Optimum engine operation due to short intake & exhaust ducts • Engine accessibility. • Current high bypass ratio engines together with the development of efficient HLS favor the use of high W/S (smaller S) and pod-mounted engines Con: Higher D penalty

  36. ENGINE PLACEMENT: Multi Engine Jet AC 2.2.1 Pod-mounted engines suspended below the wing B-47, An-225, AB-380, B-777 Pros: • Structural advantages: the mass of the engines & pylons lead to a reduction in the root BM, thus lightening the wing structure. If engines are placed ahead of the wing flexural axis, they also constitute a mass balance against flutter. • Easy engine accessibility for maintenance. • Favorable aerodynamic effects of the pylons at large: • Tend to counteract the nose-up PM of swept back wings. • Act as fences, which are often used on “clean” wings.

  37. Antonov 225 Mriya

  38. Airbus 380

  39. Boeing 777

  40. ENGINE PLACEMENT: Multi Engine Jet AC 2.2.1 Pod-mounted engines suspended below the wing Cons: • Engines placed too far outboard increase LND impact. • Engines placed too far outboard require a large fin. • Higher D. • Large YM & PM in case of engine failure.

  41. ENGINE PLACEMENT: Multi Engine Jet AC 2.2.2 Pod-mounted engines fitted to the rear of the fuselage Sud-Aviation Caravelle, DC-9 Pros: • “Clean” wing. • Low door level. • Little asymmetric T in case of engine failure. Cons: • Large c.g. travel w. variation in loading conditions. • Deep stall because of the T-tail. • W increase due to required local “beefup” of the structure. • Loss of useful space in fuselage tail; result = longer fuselage for same PL. • In general, OEW will be about 2% greater. • Engines are not easily accessible for maintenance. • At full PL large download on the tail; result = lower L/D.

  42. Sud-Aviation Caravelle

  43. DC-9

  44. ENGINE PLACEMENT: Multi Engine Jet AC 2.3 Mounting of a central engine 2.3.1 Engine buried in the fuselage B-727, L-1011 Cons: • Long and curved inlet; loss in intake efficiency. • Heavier.

  45. L-1011

  46. ENGINE PLACEMENT: Multi Engine Jet AC 2.3.1 Engine pod-mounted on top of the fuselage Problem: Fin forms an obstruction. Solutions: • Cigar engine (DC-10) • Butterfly tail

  47. DC-10

More Related