1 / 52

Geomorphology Chapter 3: Soils

Geomorphology Chapter 3: Soils. Chapter 3: Soils “Perhaps the most important part of weathering is the development of soil.” -D. Easterbrook Soil makes plant life possible Plants make animal life possible. Chapter 3: Soils Definitions Processes Characteristics Classification.

rhonda
Download Presentation

Geomorphology Chapter 3: Soils

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Geomorphology Chapter 3: Soils

  2. Chapter 3: Soils • “Perhaps the most important part of • weathering is the development of soil.” • -D. Easterbrook • Soil makes plant life possible • Plants make animal life possible

  3. Chapter 3: Soils • Definitions • Processes • Characteristics • Classification

  4. Chapter 3: Soils • Definition of soil: • varies according to discipline • Geology • Soil science • Engineering

  5. What is Soil? • A. Depends on who you ask. • To a geologist:residual material formed in situ from weathering of a parent material–either bedrock or sediment. • not a sediment • Profile from alteration of parent material • residual vs. “transported” soils

  6. What is Soil? • A. Depends on who you ask. • To a soil scientist:organic-rich material that supports plant growth. • The life zone: intersection of hydrosphere, atmosphere, lithosphere, and biosphere. • soil scientists largely trained/work in agricultural related areas—very specialized. • consider economic significance of agricultural: • grains, fruits, vegetables, feed stock, ethanol, etc. • grains biggest U.S. export • important considerations: fertility, texture, drainage

  7. What is Soil? • A. Depends on who you ask. • To an engineer:any unconsolidated material above bedrock. • important considerations: • thickness • strength • water conditions • unimportant considerations: • origin • true soil or sediment • fertility

  8. General problems associated with various soil types • (engineering and environmental perspectives): • Clays • shrink and swell w/moisture changes (esp. montmorillonite: “fat clays”) • compressibility • sensitivity (e.g., liquefaction) • poor drainage / slow or negligible transport • Silt • easily erodable • loses strength when saturated • highly susceptible to frost heave and “piping” • Sand / Gravel • fine sands may behave similar to silts • good drainage / rapid transport • Organics • highly compressible, non-uniform

  9. Chapter 3: Soils • Characteristics • unconsolidated • porous • differentiated by depth into horizons • upper horizon(s) organic-rich • soft, weak, compressible(compared to rock)

  10. Chapter 3: Soils • Processes

  11. Climate T, H2O Parent material composition, structure, texture Vegetation influences runoff / erosion depends on climate Topography slope influences runoff / erosion Time weathering may reach equilibrium given enough time Soil Forming Factors

  12. Processes and Resulting Profile • differentiated by depth into horizons • (i.e., soil “profile”) Zone of leaching CaCO3 Clays, oxides Bk

  13. Chapter 3: Soils • Classification

  14. Classification • GeologyEngineering • Coarse-grained Granular or non-cohesive • (gravels and sands) ►Well sorted ► Poorly graded ►Poorly sorted ► Well graded • Fine-grained Cohesive • (silts and clays) Grouped by texture Grouped by texture Grouped by texture and plasticity Grouped by texture

  15. Example 1 42% sand 20% clay 38% silt “Loam” Example 2 10% sand 46% silt 44% clay ?

  16. 10% sand 46% silt 44% clay Silty Clay

  17. Unified Soil Classification System (USCS)

  18. 68% 28% 4% 0% gravel sand silt clay Sample 1

  19. 68% 28% 4% gravel sand silt / clay Sample 1 D60 = 3.5mm

  20. 68% 28% 4% gravel sand silt/clay Sample 1 D10 = 0.23mm

  21. Grain Size Analysis (cont.) • Sorting (Grading) Parameters • Uniformity coefficient (Cu) • Cu =D60 / D10 • = 3.5mm / .23mm • = 1.5

  22. Grain Size Analysis (cont.) • Sorting (Grading) Parameters • coefficient of concavity (Cc) • Cc =[ D30 ]2 / [ D10 x D60 ] • = [ 1.8 ]2/ [ 0.23 x 3.5 ] • = 4

  23. Unified Soil Classification System (USCS)

  24. Our sample is 68% gravel, 28% sand, 4% silt/clay

  25. Our sample is 68% gravel, 28% sand, 4% silt/clay Cu = 1.5, Cc = 4

  26. 17% 38% 45% gravel sand silt/clay Sample 2

  27. Our sample is 17% gravel, 38% sand, 45% silt/clay YES NO

  28. Our sample is 17% gravel, 38% sand, 45% silt/clay YES NO

  29. Our sample is 17% gravel, 38% sand, 45% silt/clay YES SC OR YES YES LAB FIELD

  30. Why didn’t we just use grain size curve to determine %silt vs %clay? 17% 38% 45% gravel sand silt/clay Sample 2 • Often don’t have curve for fraction smaller than silt; just %clay/silt combined • Clay/silt distinction is based as much on behavior (plastic or non-plastic) • as actual grain size distribution

  31. Clay Mineralology Activity = PI / %clay Non-expansive clays (low PI): kaolinite, illite Expansive clays (high PI): montmorillonite

  32. SAND

  33. SILT

  34. CLAY

More Related