270 likes | 413 Views
Garmin GPS Map76 Receiver Setup Menu. Objectives. Describe how to access the Map76 Setup Menu List the different tab options in the Setup Menu Describe different choices/options within tabs Setup Map76 to get ready for use. Activity. Start simulator mode by press POWER key
E N D
Objectives • Describe how to access the Map76 Setup Menu • List the different tab options in the Setup Menu • Describe different choices/options within tabs • Setup Map76 to get ready for use
Activity • Start simulator mode by press POWER key • Press ENTER until GPS Info Page • Then pressing the MENU key • ROCKER to select “Start Simulator” • Then press ENTER key
Main Menu Scroll down with ROCKER key, then press ENTER key Backlight status External power Memory status Power status Activity
Setup Menu – General Tab Options 1 2 Mode options 3 WAAS options Activity
General Tab Options 4 Backlight options 5 Beeper options Activity – Set to “Message Only” 6 Language options Activity
Time Tab Options Format options 1 2 Time zone options Daylight Savings options Activity 3 4
Units Tab Options 1 2 Elevation options 3 Depth options
Units Tab Options 4 Distance options 5 Temperature options
Units Tab Options Direction Display choices 6
Setup Menu – Units Tab Options 7 Examples of Speed Filter Settings Activity
Location Tab Options Location Format options - Geographic Location Format options - UTM Use ROCKER key & scroll up/down, then press ENTER Activity
Location Tab Options OR Use ROCKER key to scroll, then press ENTER to select datum Activity
Location Tab Options North Reference Options Auto-computes declination Activity
Alarms Tab Options Auto - alerts 15-90 seconds depending on speed Distance option Activity
Alarms Tab Options Off Course distance Time alert in Hrs, Mins, or Secs Off Course options Activity
Interface Tab Options Press ENTER key to view choices – scroll up/down with ROCKER key Initial field – Serial Data Format Move to field with down ROCKER key
Interface Tab OptionsSerial Data Format – NMEA Out NMEA setting
Interface Tab OptionsSerial Data Format – Text Out Text setting
Interface Tab OptionsRTCM In/NMEA Out – Beacon Scan Default setting Scanning the DGPS spectrum Locked in
Interface Tab OptionsRTCM In/NMEA Out – Setup Manual Scan User manual setting
Interface Tab OptionsRTCM In/NMEA Out – Setup Manual Scan Use ROCKER to change frequency Bit Rate options
Interface Tab OptionsRTCM In/NMEA Out – Setup Manual Scan Interface Tab OptionsRTCM In/NMEA Out – Setup Manual Scan Locked & receiving DGPS station GPS Info Page – Receiving DGPS
Map 76 Diagnostics and Reset • Diagnostic screen – POWER + ENTER key • Pass/fail diagnostics • Try total reset • Total reset – POWER + MENU key • Wipes all settings, points, tracks, routes • Returns receiver back to default • Save data first • Contact support if fail shows on diagnostics
Setup Menu – Activity • Verify Map 76 setup by: • Accessing Main Menu • Selecting Setup Menu • Reviewing the selections in the tabs • Making changes so the Map76 is set for next unit