1 / 80

DYNACORD Amplifier - Powerful and Reliable for Optimal Audio Performance

Get the DYNACORD amplifier to enhance your audio system with its 600W rated output power, excellent performance, and full protection package. With features like direct-outs, bridge mode, and competitive pricing, this amplifier delivers exceptional audio quality and ensures reliable protection against potential damage.

sheltond
Download Presentation

DYNACORD Amplifier - Powerful and Reliable for Optimal Audio Performance

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. The outputpower of an amplifier

  2. Rated output- 600 W Delivers i.e.

  3. 600 W Music signals look different...

  4. 600 W ... to sinewaves. Power is not sufficient.

  5. 600 W What to do? Reduce gain ?

  6. 600 W No. Better buy a DYNACORD amplifier...

  7. 600 W And here is what you get:

  8. 600 W

  9. 780 W 600 W 30 % Headroom !

  10. S 900 S 1200

  11. 2 Power Ranges S 900 =2 x 450 W / 4 Ohm S 1200 =2 x 600 W / 4 Ohm

  12. Positioning

  13. Features • Highly Competitive Pricing • Excellent Audio Performance • Full Protection Package

  14. Active balanced Inputs • Direkt-Outs (Loop) • Bridge Mode(with separate SPEAKON-Output) • Ground-Lift-Switch • 2 Ohm operation possible

  15. 15 kg 16 kg

  16. X The powersection as well as the transformer(s) of poweramps need reliable protection to prevent damage of the unit.

  17. All DYNACORD and ELECTRO-VOICE Power-Amplifiers provide thermal control and dedicated protection of the heat-sinks as well as of the transformer(s).

  18. DC at the output of amplifiers will blow the voicecoils of connected speakers !

  19. All DYNACORD Power-Amplifiers provide reliable protection against DC at the output

  20. HF at the output of amplifiers will blow the voicecoils of connected speakers ! X

  21. All DYNACORD Power-Amplifiers provide reliable protection against High Frequency at the output

  22. Defective cables or defective speakers may cause short circuits at the poweramp‘s output(s)

  23. All DYNACORD Power-Amplifiers provide reliable protection against damage due to short circuits at the output

  24. No speakers connected ?

  25. No Problem !

  26. Connect any (i.e. 15-3 way) speaker cabinet to any power amplifier.

  27. The cabinet with its crossover represents a reactive load to the amplifier and sends a (normally small) part of the energy back into the amp.

  28. This phenomenon is called Electro Motive Force

  29. In case that i.e. the crossover or a speaker is defective the BACK-EMF may become very high and can damage the power transistors of the amplifier

  30. Audio Performance

  31. The THD+N versus frequency test routine is used in order to determine the amount of Total Harmonic Distortion + Noise versus the frequency at rated output power.

  32. This measurement gives information about the linearity of the power amp.

More Related