1 / 17

Review Chapters 1, 2, and 3

Review Chapters 1, 2, and 3. Physical . Physical properties can be observed without changing the substance into a different substance. Color Shape Mass Density

sierra
Download Presentation

Review Chapters 1, 2, and 3

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Review Chapters 1, 2, and 3

  2. Physical • Physical properties can be observed without changing the substance into a different substance. • Color • Shape • Mass • Density • A physical change can be determined without altering the chemical makeup of the material. The identity of the substance is not changed. • Any phase change like melting ice, freezing water • Sharpening pencil • Squashing a bug

  3. Physical Methods of Separation • Chromatography- separation of compounds, usually dyes. The more soluble a compound is in the carrier solvent the further it will travel on the paper. • Fractional Distillation- separation of miscible liquids. The solution is heated until boiling. As liquids have different boiling points the one with the lower BP will go out first into a separate container to be cooled and condensed as pure.

  4. Physical Methods of Separation • Distillation- heating of a liquid with a soluble solid in it. Heat until boiling, it moves through • Evaporation- used to separate solid from liquid. Heat until the liquid evaporates off leaving the solid behind. • Filtration- used to separate insoluble solid from a liquid. Solid remains on the filter paper while the liquid is pulled through.

  5. Chemical • Chemical properties can be observed only when a substance is changed into a different substance. • Ability to burn • Ability to rot • Ability to grow • A chemical change can often be detected by observing the formation of a solid material, a color change, a change in the surface of a solid material, formation of bubbles, or a temperature change (indicating that heat has been absorbed or given off.) • Burning pencil • Bug decaying after squashing • Metal rusting

  6. STP vs SATP • STP – standard temperature and pressure • 0.00˚C or 273 K • 1 atm= 760 mmHg = 760 torr = 101 kPa • SATP – standard ambient temperature and pressure • 25.0 ˚C or 298 K • 1 atm = 760 mmHg = 760 torr = 101 kPa

  7. Isotopes • Atoms with the same number of protons and electrons but differing numbers of neutrons. • Percent abundance of isotopes: • Be able to calculate percent abundance • Deals with fraction math • The whole is 1 or 100 (decimal or percent) • X + Y = 1 solve for Y Y = 1-X • Average atomic mass = mass A (x) + mass B (1-x) • Be able to average atomic mass

  8. Isotope Example The element, europium, exist in nature as two isotopes: Eu-151 which has a mass of 150.9196 amu and Eu-153 which has a mass of 152.9209 amu. The average atomic mass of europium is 151.96 amu. Calculate the abundances of the two isotopes.

  9. Limiting Reactant Step 1: write out balanced equation. Step 2: convert each reactant to mass of product Step 3: the reactant that makes the LEAST amount of product is the limiting reactant.

  10. What mass of Ag₂S is produced from a mixture of 2.0 g Ag and 2.0 g S ? Step 1: 16 Ag + S₈  8Ag₂S

  11. Formulas • The empirical formula of a chemical compound indicates the simplest whole number ratio of the different kinds of atoms that make up that compound. • A molecular formula indicates the exact number of each type of atom that makes up a particular compound. • Often, compounds may share the same empirical formula but have different molecular formulas because they have different multiples of the empirical formula.

  12. %  mass mass  moles ÷ by small X ‘til whole

  13. Empirical FormulaSample Problem • The percent composition by mass of a compound is 56.6 % potassium, 8.7 % carbon, and 34.7 % oxygen. Determine its empirical formula.

  14. Red Flag Numbers 0.25 0.33 0.5 0.67 0.75 Multiply by: 4 3 2 3 4

  15. Molecular FormulaSample Problem Analysis of a compound indicated that its empirical formula is C2H4O and its molar mass was 176.0 grams/mole. What is the molecular formula of this compound?

  16. Energy, Wavelength, and Frequency • Two formulas: • E = hν E= energy h = 6.63 x 10 ^-34 J s Plank’s constant ν = frequency • c= λν c= 3.0 x 10^8 m/s speed of light λ = wavelength ν = frequency

  17. Last Bit • Be able to convert between moles, molecules, and grams • Be able to name ionic compounds, covalent compounds, and acids • Combustion problems • Polyatomic ions

More Related