1 / 12

Multi-Family Housing Protocol Comparison

This document compares the Illinois Protocol ANSI/AARST MAMF-2012 with the recommended ANSI/AARST Standard for conducting radon measurements in multi-family buildings. It provides guidance on where and how to test for radon in multi-family buildings, including regularly occupied rooms, ground-contact areas, non-residential rooms, and upper floors.

sshumaker
Download Presentation

Multi-Family Housing Protocol Comparison

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Multi-Family Housing Protocol Comparison Patrick Daniels IEMA Radon Program

  2. AGENCY NOTE: The Agency recommends using the "ANSI/AARST Standard: Protocol for Conducting Radon and Radon Decay Product Measurements in Multifamily Buildings" in preparing multi-family building standard operating procedures. Section 422.60 Requirements for Issuance or Renewal of Licenses

  3. Illinois Protocol ANSI/AARST MAMF-2012 Section 422.130 f) 1) Initial measurements shall be short-term measurements of at least 48 hours to 90 days, depending on the device used, and shall be made in regularly occupied rooms in contact with the soil, whether the contact is slab-on-grade, a basement, a berm, a room above a crawlspace or any combination. 3.0 Where to Test 3.1 Conduct a measurement in each ground contact apartment, dwelling and those rooms that are used as office space. This means each unit that has floor(s) and/or wall(s) in contact with the ground or is over crawlspaces, utility tunnels or parking garages.

  4. Illinois Protocol ANSI/AARST MAMF-2012 • Section 422.130 f) 1) • Regularly occupied rooms include bedrooms, offices, dens, family rooms, work areas and play rooms. • 3.0 Where to Test • 3.1 Within each dwelling, test a room located in the lowest livable level that is in contact with the ground or above a crawlspace, utility tunnel or garage. If the lowest level is not currently used but could serve as a den, playroom, office, work area or an additional bedroom at some time in the future, conduct a test in this level.

  5. Illinois Protocol ANSI/AARST MAMF-2012 Section 422.130 f) 1) B) A minimum of one detector shall be placed per every 2000 square feet of open floor area. . 3.0 Where to Test 3.3 For large rooms or open areas – Place one detector every 2,000 square feet

  6. Illinois Protocol ANSI/AARST MAMF-2012 Section 422.130 f) 3.0 Where to Test 3.2 Also conduct a measurement in non-residential ground-contact rooms or areas (e.g. utility rooms, storage rooms, and maintenance rooms) that are occupiable with little or no modification; or have air communication with occupiable areas (e.g. stairwells and elevator shafts). When in doubt, test the area. Results may indicate a need for additional testing in upper areas.

  7. Illinois Protocol ANSI/AARST MAMF-2012 Section 422.130 f) 3.0 Where to Test 3.4 On the upper floors, conduct a measurement in at least one apartment on each floor; include measurements in at least 10 % of the dwellings on each of the higher floors. It is recommended that the upper floor test locations be selected so that units on one floor are not directly above or below units being tested on other floors.

  8. Illinois Protocol ANSI/AARST MAMF-2012 Section 422.130 f) 2) Regularly occupied rooms shall be tested simultaneously. 3.0 Where to Test 3.5 Test all areas during the same time period (days or phase).

  9. Patrick Daniels (217) 782-1325 patrick.daniels@illinois.gov Questions?

More Related