1 / 10

Conduction

Conduction. Conduction Energy flow from direct thermal contact. Radiation Energy radiating from an object into surroundings. Transfer Mechanisms. Heat can be transferred in three ways. Transfer can include more than one way. Convection Fluid flow carrying energy. Direct Contact.

sweeneya
Download Presentation

Conduction

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Conduction

  2. Conduction Energy flow from direct thermal contact Radiation Energy radiating from an object into surroundings Transfer Mechanisms • Heat can be transferred in three ways. • Transfer can include more than one way. • Convection • Fluid flow carrying energy

  3. Direct Contact • Items in direct contact transfer heat. • Molecules in hot regions have greater kinetic energy. • Elastic collisions with cool molecules • Kinetic energy transfer at boundary

  4. Heat flow within an object is due to transfer by conduction. Thermal conductivity (k) measures the ability for heat to move in a material. Measured in W / m-K High number means high rate of transfer Material Thermal Cond. Air 0.026 W/m-K Stryrofoam 0.029 W/m-K Wood 0.11 W/m-K Water 0.61 W/m-K Glass 0.8 W/m-K Concrete 1.0 W/m-K Steel 46 W/m-K Aluminum 240 W/m-K Copper 400 W/m-K Thermal Conductivity

  5. Heat Flow Rate • The rate of heat flow depends on the temperature gradient. • Change in temperature with distance • Depends on surface area A for contact. A H T + DT T Dx

  6. Conductors and Insulators • Thermal conductors have high values of k. • Metals with conducting electrons • Greater than 10 W/m-K • Still air is an excellent thermal insulator. • Materials that trap air are good: wood, styrofoam • Vacuum would be the best.

  7. A lake with a flat bottom and steep sides has a surface area 1.5 km2 and is 8.0 m deep. The surface is at 30 C and the bottom is at 4 C. What is the rate of heat conduction through the lake? Convert area to m2. 1.5 km2 = 1.5 x 106 m2 Use the equation for heat flow. H = -kA(DT/Dx) -(0.61 W/m-K)(1.5 x 106 m2) (26 K) / (8.0 m) H = -3.0 x 106 W. Swimming Hole

  8. Two Layers • If there are two layers in thermal contact, the rate of heat flow must be the same for both. • Energy doesn’t accumulate in the layer. T3 T2 T1 H H Dx2 Dx1

  9. Thermal Resistance • For an arbitrary set of layers the intermediate temperature is unknown. • Define thermal resistance • For multiple layers R adds T3 T2 T1 H H R2 R1

  10. In the US, thermal resistance is measured per unit area. R = Dx / k Units are ft2F hr / BTU 1 BTU = 1055 J Material R-factor Glass (1/8”) 1 Brick (3½”) 0.6 – 1 Plywood (1/2”) 0.6 Fiberglass insulation (1”) 4 R-Factor

More Related