1 / 6

CLIC Stabilisation meeting 8

Welcome. Newcomers. CLIC Stabilisation meeting 8. paper “Active control of quadrupole motion for future linear particle colliders” C.Collette et al. , IASTED Intelligent systems and control, November 2009, Cambridge, USA. Info:.

tassos
Download Presentation

CLIC Stabilisation meeting 8

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Welcome Newcomers CLIC Stabilisation meeting 8 paper “Active control of quadrupole motion for future linear particle colliders” C.Collette et al. , IASTED Intelligent systems and control, November 2009, Cambridge, USA Info: Vibration Measurements at CESR (USA-Ithaca) in 2009 , M. Sylte EDMS1004462 Ground vibration measurements and Experiment parts motion measurement at CMS,A.KUZMIN, EDMS 1027459 8/12/2009 Some news from the CDR and Module WG

  2. CLIC Stabilisation meeting 8 Call for papers Special session: Vibration isolation and nano-positioning 8/12/2009 Contact: Christophe Collette

  3. CDR draft writing March-June 2010 CLIC Stabilisation meeting 8 • Means providing technical documentation “state of the art” on : • Sensors: performance and measurement techniques • Actuators and precision guiding • Controller • Characterisation Ground motion and vibrations + Characterisation of support and floor 8/12/2009 • Demonstration of technical feasibility Main goal: Demonstrate technical feasibility of stabilisation of the CLIC Main beam quadrupoles to 1 nm R.M.S. Integrated displacement at 1 Hz and 5 nm Lateral

  4. Accelerator environment CDR 2010 >>>> TDR 2015 TEST MODULE CLEX CLIC Stabilisation meeting 8 Integration stabilisation in module 8/12/2009

  5. Test program B252 IN LAB B162  alignment test IN CLEX 3 TEST MODULES 0 1 4 Installation of Three Test Modules requires space of 6030 mm (3x2010) Total – 4 modules Total – 3 modules Anastasiya Solodko

  6. CLIC Stabilisation meeting 8 8/12/2009 • Some parts will be dummy parts in the test module and CLEX • but the active parts for the stabilisation are considered independent (double)

More Related