1 / 27

Replacement Mini-comp MF CR-04

Replacement Mini-comp MF CR-04. MF Program Office 2008 LRG 21 May 2008. Changes Driven by New 2M Workstation. Current way—2M tools are part of Tool Control Program; some are specialized & others are hard to procure Lack of standardized 2M tools Fleet wide

tessa
Download Presentation

Replacement Mini-comp MF CR-04

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Replacement Mini-comp MFCR-04 MF Program Office 2008 LRG 21 May 2008

  2. Changes Driven by New 2M Workstation • Current way—2M tools are part of Tool Control Program; some are specialized & others are hard to procure • Lack of standardized 2M tools Fleet wide • Future plan—2M workstations will be support equipment set; tracked by IMRL Program • PMA-260 is procuring one standardized 2M workstation, which applies to Navy hard site and USMC Mobile Facilities • S/E drawers are different dimensions than current MF drawers

  3. 2M Workstation & Microscope

  4. 2M Display Trainer

  5. S/E Workstation Allowancing AMMRL Activity IdentifierComputed/Authorized AllowanceMFs Required (CR-04)Current MFs (CR-01) MALS-16 4 2 2 MALS-24 2 1 2 MALS-24N 3 1 0 MALS-26 4 2 2 MALS-26T 2 1 0 MALS-29 4 2 2 MALS-29T 2 1 0 MALS-36 3 1 2 MALS-39 4 2 2 MALS-39T 3 1 0 MALS-42 3 1 0 MHMX-1 3 1 1 MVMR-1 1 1 0 MAG-49 2 1 0 MALS-49 3 1 2

  6. S/E Workstation Allowancing AMMRL Activity IdentifierComputed/Authorized AllowanceMFs Required (CR-04)Current MFs(CR-02) MALS-11 3 1 2 MALS-11T 3 1 1 (CR-01?) MALS-12 3 1 2 MALS-13 3 1 2 MALS-14 3 1 2 MALS-14T 2 1 0 MALS-31 4 2 2 MALS-41 3 1 2 MCC-1 0 0 1 MCC-2 0 0 1 MCC-3 0 0 1 Total = 67 28 31

  7. Navy MFs that Require Replacement? • ELU-1 (x2) CR-01s • GSS-041 • PPC-226 • AIMD Washington (x2) CR-01s • PAQ-160 • GSG-283 • AIMD Bahrain (x1) CR-01 • RJF-456

  8. S/E Workstation Allowancing • The planned S/E to MF ratio is three 2M workstations per MF (3:1). • Current PMA-260 planned allowance—x67 sets • 2M workstations required for x28 (CR-04)MFs—x84 sets • 2M workstation delta—x17 sets (shortage)

  9. Replacement Mini-comp MF • CR-01s: CCSPRW, TTSA11, HMXXXX and MCCXXX • MCCs are being absorbed into host MALS / sun-downed • Total requirement for sixteen MFs (x19 now / x16 future) • TTSA11 asset (CR-01) seems peculiar—need CR-04? • CR-02s: CCSPFW • Total requirement for twelve MFs (x12 now / x12 future) • In order to replace all current CR-01s and CR-02s; TBA would require (x28) CR-04 MFs • Need ASL-34/MARFORs to establish future MF requirement

  10. Proposed MF Design Changes • Eliminate all MF exhaust fans • Install new fume extractor with better installation design • Incorporate 1,000 foot candles fluorescent lights under kendorf • Eliminate Surface Mount Technology Rework Station (CR-02) • Only install three 2M workstations per MF vice four • Eliminate desk & countertops adjacent 2M workstations • Install small, ergonomic shelving to left/forward of each 2M workstation for high usage items (i.e., Q-tips, flux, solder, etc.)

  11. Bench-top Plenum/Arm Extractor

  12. Arm Evac 50

  13. Proposed MF Design Changes • Gather Fleet 2M technician input; establish MF requirements • Install 18” deep shelving behind 2M workstations for supplies (i.e., wire, Kim wipes, acid brushes, lint free rags, etc.) • Install 18” deep shelving for SRA/WRA work load • Install small SRA/WRA curing oven (still required)—MR-01 • Install small sand blast booth (still required)? • Consolidate work from other MFs into single design

  14. Questions ?

  15. Backup Slides

  16. MALS-41 CR-04 Recommendations • Space made under the Kendorf to allow for the PRC-2000 to be mounted. Leaving more work space available. • Request additional counter space for processing of gear. • Move electrical drops into upper right corner of each station. • Recommend chairs with wheels. Allows for ease of movement when working on gear. • Cleaning booth not utilized.

  17. Additional Counter Space for processing gear

More Related