1 / 37

Algebra 2 Chapter 2 Notes Linear Equations and Functions

Algebra 2 Chapter 2 Notes Linear Equations and Functions. 2.1. Functions and their Graphs.

thane-fisher
Download Presentation

Algebra 2 Chapter 2 Notes Linear Equations and Functions

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Algebra 2 Chapter 2 Notes Linear Equations and Functions

  2. 2.1 Functions and their Graphs • A RELATION is a mapping or pairing of input values with output values. The set of input values in the DOMAIN and the set of output values is the RANGE. A relation is a FUNCTION if there is exactly one output for each input. It is not a function if at lest one input has more than one output. • ( x , y ) = (domain , range ) = ( input , output) = (independent , dependent) • Not a functionYes a function • 3 3 - 3 3 • 1 –2 1 1 • 1 2 • 4 4 4 –2 • A relation is a function if and only if no vertical line intersects the graph of the relationship at more than one point.         NOT a RELATION YES a RELATION

  3. 2.1 Coordinate Plane Y axis Quadrant II ( – , + ) Quadrant I ( + , + ) ( 0 , 0 ) X axis Quadrant III ( – , – ) Quadrant IV ( + ,– ) x coordinate is first y coordinate is second Ordered pairs in form of ( x , y )

  4. 2.1 Functions and their Graphs y = m x + b LINEAR FUNCTION f (x) = m x + b FUNCTION NOTATION • Graphing equations in 2 variables • Construct a table of values • Graph enough solutions to recognize a pattern • Connect the points with a line or a curve y Graph the function: y = x + 1     x 

  5. 2.1 Functions and their Graphs • Are these functions linear?. Evaluate when x = – 2 • f ( x ) = – x2 – 3 x + 5 Not a function because x is to the 2nd power • f ( – 2 ) = – ( – 2 ) 2 – 3 ( – 2 ) + 5 • f ( – 2 ) = 7 • g ( x ) = 2 x + 6 Yes a function because x is to the 1st power • g ( – 2 ) = 2 ( – 2 ) + 6 • g (– 2 ) = 2

  6. 2.1 Slope and Rate of Change SLOPEof a non-vertical line is the ratio of a vertical change (RISE) to a horizontal change (RUN). Slope of a line: m = y2 – y1 = RISE x2 – x1= RUN (differences in y values) (differences in x values) y ( x2,y2) •  y2 – y1 RISE ( x1,y1) • x2 – x1 RUN x

  7. 2.2 Slope and Rate of Change CLASSIFICATION OF LINES BY SLOPE A line with a +slope rises from left to right [ m > 0 ] Positive Slope A line with a –slope falls from left to right [ m < 0 ] Negative Slope A line with a slope of 0 is horizontal [ m = 0 ] 0 Slope A line with an undefined slope is vertical [ m = undefined, no slope ] No Slope

  8. 2.2 Slope and Rate of Change SLOPES OF PARALLEL & PERPENDICULAR LINES PARALLEL LINES: the lines are parallel if and only if they have the SAME SLOPE. m1 = m2 PERPENDICULAR LINES: the lines are perpendicular if and only if their SLOPES are NEGATIVE RECIPROCALS. m1 = –1 m2 or m1m2 = – 1

  9. 2.2 Slope and Rate of Change Slope of a line: m = y2 – y1 = RISE (differences in y values) x2 – x1= RUN (differences in x values) Ex 1: Find the slope of a line passing through ( – 3, 5 ) and ( 2, 1 ) Let ( x1, y1 ) = ( – 3, 5 ) and ( x2, y2 ) = ( 2, 1 ) m = 5 – 1 = 4 – 3 – 2 – 5 OR m = 1 – 5 = – 4 2 + 3 5 5 • ( – 3, 5 ) –4 • x ( 2, 1 ) y

  10. 2.2 Slope and Rate of Change • Example 2: Without graphing tells if slope rises, falls, horizontal or vertical: • ( 3, – 4 ) and ( 1, – 6 ) : m = – 6 – ( – 4 ) = - 2 = 1 m > 0, rises • 1 – 3 - 2 • b) ( 2, 2 ) and ( –1, 5 ) : m = 5 – ( – 1 ) = 6 = undefined m = no slope • 2 – 2 0 For 2 lines with + slopes, the line with > slope is steeper For 2 lines with – slopes, the line with slope of > absolute value is steeper: y m = 3 m = - 3 m = 1 m = - 1 m = 1/2 m = - 1/2 x

  11. 2.2 Classifying Lines Using Slopes Classifying Perpendicular Lines Line 1 through ( – 3 , 3) and ( 3 , – 1 ) m 1 = – 1 – 3 = – 4 = – 2 3 – ( - 3) 6 3 Line 2 through ( - 2 , - 3 ) and ( 2 , 3 ) y L2 L1 ( –3 , 3 ) • • ( 2, 3 ) x • m 2 = 3 – ( – 3 ) = 6 = 3 2 – ( – 2 ) 4 2 ( 3 , – 1 ) Because m1 ∙ m2 = – 2 ∙ 3 = – 1 3 2 are negative reciprocals of each other, the lines are perpendicular. • ( –2 , – 3 )

  12. 2.2 Classifying Lines Using Slopes Classifying Parallel Lines Line 1 through ( – 3 , 3) and ( 3 , – 1 ) m 1 = 4 – 1 = 3 = 1 3 – ( - 3) 6 2 Line 2 through ( - 2 , - 3 ) and ( 2 , 3 ) ( 3, 4 ) y • ( 4 , 1 ) ( -3 , 1 ) • • x m 2 = 1 – ( – 3 ) = 4 = 1 4 – ( – 4 ) 8 2 L1 ( -4 , - 3 ) Because m1 = m2 and the lines are different, then the lines are parallel. • L2

  13. 2.3 Quick Graphs of Linear Equations Slope Intercept Form of a linear equation is y = m x + b, where m is slope and b is y-intercept • Graphing Equations in slope-intercept form: • Write the equation in slope-intercept form by solving for y • Find y-intercept, then plot the point where line crosses the y-axis • Find the slope and use it to plot a second point on the line. • Draw a line through the 2 points. y • Example 1: Graphing with the slope-intercept • Graph: y = 3 x − 2 • 4 • Already in slope-intercept form • y -intercept is – 2, plot point ( 0 , – 2 ) • where the line crosses the y-axis • 3. Slope is ¾ , so plot 4 units to right, • 3 units up, point is ( 4 , 1 ) • 4. Draw a line through the 2 points ( 4 , 1) • x 3 • ( 0 , – 2) 4

  14. 2.3 Quick Graphs of Linear Equations Standard Form of a linear equation is ax + by = c x-intercept of a line is the x-coordinate of the point where the line intersects the x-axis • Graphing Equations in standard form • Write the equation in standard form • Find x-intercept, by letting y = 0, solve for x, plot the point where x crosses the x-axis • Find y-intercept, by letting x = 0, solve for y, plot the point where y crosses the y-axis • Draw a line through the 2 points. • Method 1 by using Standard Form: • Graph 2 x + 3 y = 12 • Already using standard form: 2 x • Let y = 0 2 x + 3(0) = 12 • 2 x = 12 • x = 6 • x-intercept is at ( 6 , 0 ) • Let x = 0 2 (0) + 3 y = 12 • 3 y = 12 • y = 4 • y-intercept is at ( 0 , 4 ) • 2 x + 3 y = 12 ( 0 , 4 ) • ( 6 , 0 )

  15. 2.3 Quick Graphs of Linear Equations • 3 • Method 2 by using Slope-Intercept Form: • Graph 2 x + 3 y = 12 • Change from standard form to slope-intercept form: 2 x + 3 y = 12 • -2 x - 2 x • 3 y = – 2 x + 12 • 3 3 • y = – 2 x + 4 • 3 • Identify , plot y-intercept • Use slope to plot other point • Draw a line through the points ( 0 , 4 ) 2 • ( 3 , 2 ) 2 x + 3 y = 12 y-intercept slope y x = 3 ( 0 , 3 ) y = 3 • Horizontal lines --- graph of y = c is a horizontal line through, (0 , c) Vertical lines --- graph of x = c is a vertical line through (c, 0) Graph y = 3 and x = -2 ( - 2 , 0 ) • x

  16. 2.4 Writing Equations of Lines Slope-Intercept Form: y = m x + b Point-Intercept Form: y – y1 = m ( x – x1 ) Two Points: m = y2 – y1 x2 – x1 * Every non-vertical line has only one slope and one y-intercept m = slope b = y-intercept y • Write an equation of line shown • From graph you can see the slope, m = 3 • 2 • From graph you can see that it intersects at ( 0 , −1 ) , so the y-intercepts is b = −1 • ( 2, 2) x 3 • Equation of the Line is: y = 3 x − 1 2 ( 0, −1) 2

  17. 2.4 m ( x1 ,y1 ) Writing equations of the line given slope of − 1 and a point, ( 2 , 3 ) 2 Writing Equations of Lines y – y1= m ( x – x1) y – 3= –1( x – 2) 2 y – 3= –1x + 1 2 + 3 + 3 y = – 1 x + 4 2 Equation of the Line

  18. 2.4 Writing Equations of Perpendicular and Parallel Lines y – y1 = m2 ( x – x1) y – 2 = 1 ( x – 3) 3 y – 2 = 1 x – 1 3 + 2 + 2 y = 1 x + 1 3 Example 3a: Equation of a line that passes through ( 3 , 2 ) that is perpendicular to the line: y = – 3 x + 2 Perpendicular means m2 = – 1 m1 Example 3b: Equation of a line that passes through ( 3 , 2 ) that is parallel to the line: y = – 3 x + 2 Parallel means m2 = m1 = – 3 and ( x1 , y1 ) = ( 3 , 2 ) y – y1 = m2 ( x – x1) y – 2 = – 3 ( x – 3) y – 2 = – 3 x + 9 + 2 + 2 y = – 3 x + 11

  19. 2.4 Writing Equations of Lines Writing Equations given 2 points where ( x1 , y1 ) = ( – 2 , –1 ) ( x2 , y2 ) = ( 3 , 4 ) m = y2 – y1 = 4 – ( – 1 )= 5 = 1 x2 – x1 3 – ( – 2 ) 5 y – y1 = m ( x – x1) y – ( – 1 ) = 1 [ x – ( – 2 ) ] y + 1 = 1 ( x + 2 ) y = x + 1

  20. 2.4 Writing the Equation of the Line The form you use depends on the information you have

  21. 2.5 Writing Direct Variation Equations • Direct Variation is shown by y = k x , where k ≠ 0 and k is a constant, (that is a single value) • Example 1: Variables x and y vary directly, y = 12 and x = 4 • write and graph an equation for y and x • find y when x = 5 • y x y 0 0 4 12 5 15 • y = kx (12 ) = k (4) 3 = k • x y = 3x Example 3 x = 9 and y = 15 y = kx 15 = k9 5= k 3 Example 2 x = 6 and y = 3 y = kx 3 = k6 1= k 2 y = 1x 2 y = 5x 3

  22. 2.5 Scatter Plots A scatter plot is a graph used to determine, whether there is a relationship between paired data. Positive Correlation Negative Correlation • • • • • • • • • • • • • • • • • • • • • • • • No Correlation • • • • • • • • • • • • • • • •

  23. 2.5 A scatter plot is a graph used to determine, whether there is a relationship between paired data Approximating a best-fitting line: Graphical approach Step 1: draw a scatter plot of dataStep 2: sketch the line based on the pattern Step 3: choose 2 points on the line Step 4: find the equation of the line that passes through the 2 points Example 2: Fitting a line to data Line through two points: m = 1 − .6 = .4 = .25 2.5 - .9 1.6 Point-slope form: y – y1 = m ( x – x1) y – .6 = .25 ( x – .91) y – .6 = .25 x - .225 + .6 + .6 y = .25 x + .225 Scatter Plots • • 1.2 .8 .4 .2 • • • • • • • • • • • • 0 1 2 3

  24. 2.6 Linear Inequalities in Two Variables Linear Inequalities in Two Variables can be written in one of the following forms: ax + by < c ax + by ≤ c ax + by > c ax + by ≥ c An ordered pair ( x , y ) is a solution of a linear inequality if the inequality is true for values of x , y. Example, ( − 6 , 2 ) is a solution of y ≥ 3 x − 9 because 2 ≥ 3 (− 6) − 9 is true as 2 ≥ − 27 Example 1: Checking Solutions of Inequalities Ordered pairs Substitute Conclusion ( 0 , 1 ) 2 ( 0 ) + 3 ( 1 ) ≥ 5 3 ≥ 5 False, not a solution ( 4 , −1 ) 2 (4 ) + 3 (−1 ) ≥ 5 5 ≥ 5 True, is a solution ( 2 , 1 ) 2 ( 2 ) + 3 ( 1 ) ≥ 5 7 ≥ 5 True, is a solution

  25. 2.6 Linear Inequalities in Two Variables Graph of a linear inequality in two variables is a half-plane. To graph a linear inequality follow these steps: Step 1: Graph the boundary line of the inequality. Remember to use a dash line for < or > and a solid line for ≤ or ≥ Step 2: Test a point out that is NOT on the line to see what side to shade. Graph: y < − 2 Graph: x < 1 y y x < 1 x = 1 x x y = − 2 y < − 2

  26. 2.7 Graphing Linear Inequalities in Two Variables y = 2 x • • • Test Point ( 1, 1 ) y < 2 x Test Point ( 0, 0 ) 2 x – 5 y = 10 • • • 2 x – 5 y > 10

  27. 2.7 Piecewise Functions Piecewise Functions: A combination of equations, each corresponding to part of a domain Example 1: Evaluating a piecewise function Evaluate f (x) when x = 0, when x = 2 and when x = 4 Evaluate f (x) = x + 2 , if x < 2 2 x + 1 , if x ≥ 2 Solution: When x = 0 , f (x) = x + 2 f (0) = 0 + 2 = 2 When x = 2 , f (x) = 2 (x) + 1 f (2) = 2 (2) + 1 = 5 When x = 4 , f (x) = 2 (x) + 1 f (4) = 2 (4) + 1 = 9 { • ○ 0 2

  28. 2.7 Graphing Piecewise Functions { Graphing a Piecewise Functions: f (x) = 1x + 3 , if x < 1 2 2 − x + 3 , if x ≥ 1 ( 1 , 2 ) • • • f (x) = 1 x + 3 2 2 • f (1) = 1 (1 ) + 3 = 4 = 2 2 2 2 f ( −3) = 1 ( −3) + 3 = 0 2 2 f ( x ) = − x + 3 f ( 1 ) = − ( 1 ) + 3= 2 f (3 ) = − (3) + 3 = 0 2 rays with a common initial point, ( 1, 2 )

  29. 2.7 Graphing Piecewise Functions y Graph the following piecewise function, show all work, label graph • { f (x) = 2x – 1 , if x ≤ 1 3 x + 1 , if x > 1 ○ • x •

  30. 2.7 Graphing Piecewise Functions { y ○ • 4 f (x) = 1 , if 0 ≤ x < 1 2 , if 1 ≤ x < 2 3 , if 2 ≤ x < 3 4 , if 3 ≤ x < 4 • ○ 3 • ○ 2 • ○ 1 x 1 2 3 4 It is called a Step function because its graph looks like a set of stair steps

  31. 2.7 Writing a Piecewise Function (−2 , 0 ) , ( 0 , 2 ) m = 0 – 2 = − 2 = 1 − 2 – 0 − 2 ( 0 , 2 ) ○ • ( 2 , 2 ) y = 1 x + 2 (−2 , 0 ) • • ( 0 , 0 ) y = 1 x + 0 (0, 0 ) , ( 2 , 2 ) m = 0 – 2 = − 2 = 1 0 – 2 − 2

  32. y Writing a Piecewise Function y = x y = − x { • • x , if x > 0 Remember: │x│ =0, if x = 0 − x, if x < 0 ( − 2 , 2 ) ( 2 , 2 ) x • y = │x │ Vertex Slope – Intercept Form y = m x + b Absolute Value Function: y = a │ x – h │ + k

  33. 2.8 Absolute Value Functions Absolute Value Function: the a value gives you face up or down and steepness y = a │ x – h │ + k If a is + , then the graph is face up or If a is − , then the graph is face down If a is bigger, then slope is steeper If a is smaller, then slope is wider

  34. 2.8 Absolute Value Functions Absolute Value Function: the h value gives you Right (+) or left (−) movement of vertex y = a │ x – h │ + k The more h is + , the more the vertex moves to the right The more h is − , the more the vertex moves to the left y = a │ x – ( − 3) │ + k y = a │ x – ( 0 ) │ + k y = a │ x – ( 3 ) │ + k

  35. 2.8 Absolute Value Functions Absolute Value Function: the h value also gives you Line of Symmetry y = a │ x – h │ + k The line of symmetry is in the line x = h y = a │ x – ( − 3) │ + k y = a │ x – ( 0 ) │ + k y = a │ x – ( 3 ) │ + k x = − 3 x = 0 x = − 3

  36. 2.8 Absolute Value Functions Absolute Value Function: the k value gives you Up or down movement of the vertex y = a │ x – h │ + k The more k is + , the more the vertex moves up The more k is − , the more the vertex moves down y = a │ x – h │ + 3 y = a │ x – h │ + 0 y = a │ x – h│ − 3

  37. 2.8 Absolute Value Functions (h, k) values gives you the Vertex of the Absolute Value Function y = a │ x – h │ + k • (h, k)

More Related