1 / 4

Software for the new power supply system

Software for the new power supply system. 2002 May 30 T.Tsuboyama. The whole system was delivered from Kenwood on 13 May. A PS system consists of Two crates Total of 13 isolated PS units. 11 LVPS + 2 HVPS Built-in sequencer Voltage/current setting Voltage/current limit

trapper
Download Presentation

Software for the new power supply system

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Software for the new power supply system 2002 May 30 T.Tsuboyama

  2. The whole system was delivered from Kenwood on 13 May • A PS system consists of • Two crates • Total of 13 isolated PS units. • 11 LVPS + 2 HVPS • Built-in sequencer • Voltage/current setting • Voltage/current limit • Ramp up/down control (HV) • GPIB interface

  3. Software • A huge test program was developed by Kenwood. • It seems a simple modification of this software does not work. • Similar lines are repeatedly used many times: the code is difficult to read. • It assumes one GPIB card and one GPIB address. • It is an interactive program through console.

  4. The software to be developed • One computer with two GPIB interface cards controls the 10 systems. • NSM driven: Linux is essential. • Commands are sent through NSM messages or unix signals. • Monitor data from PS is sent back to DAQ through NSM. • Interlock information from P.S. is sent to CDAQ via NSM messages.

More Related