1 / 29

PRESENTATION .hmc DS Systems

.hmc. PRESENTATION .hmc DS Systems . .hmc. ‘Wherever water is used for DUST SUPPRESSION in Mines / CHP / Power / Steel Cement / .hmc Conflow products can be found’ The main areas of use is :- 1. Dust Suppression . .hmc. Dust Suppression. Why needed:

twyla
Download Presentation

PRESENTATION .hmc DS Systems

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. .hmc. PRESENTATION.hmc DS Systems

  2. .hmc. ‘Wherever water is used for DUST SUPPRESSION in Mines / CHP / Power / Steel Cement / .hmc Conflow products can be found’ The main areas of use is :- 1. Dust Suppression

  3. .hmc. Dust Suppression • Why needed: • airborne coal dust, when mixed with gas and in the presence of a naked flame, is very dangerous and causes an explosion. • What is needed: • methods of using the plentiful supply of water available in a coal mine to suppress the dust • products to control, filter, measure and (most importantly) spray, water to supress the dust to prevent it becoming airborne • Essential Dust Suppression Requirements: • CONTROL - FILTER - SPRAY • Where located: • conveyor belt line transfer points • roadway headings • coal faces • roof support systems

  4. .hmc. Conveyor belt line transfer point TYPICAL BELT LINE DUST SUPPRESSION SYSTEM

  5. .hmc. Auto Belt Spray-Code 100

  6. .hmc. Auto Belt Spray SECTIONED VIEWS SHOWING FEATURES

  7. .hmc. Auto Belt Spray

  8. .hmc. The hydraulic pump that operates when ‘Coal comes on belt’ and develops water spray Water connection to new unit Water addition in raw material blend through automated hydraulic pump system installed by hmc

  9. .hmc. Water spray on Operating Conveyor Belt at Bhilai Steel Plant This spray is independent of solenoid and electrical power requirement. The Pump which is driven by the ‘load on belt’ is totally independent of any electrical power and solenoid. Such systems are available in Power Plant and other units of ‘NTPC’.

  10. .hmc. Auto Belt Spray • Extra features • choice of drive wheel for different belt speeds • choice of water valve size for volume of water flow • wheel height cam adjustment • What would happen if you did not have it? • dust would be created along belt lines • Population and use world wide: • manufactured and supplied since 1963 • approximately50,000 sold • UK, USA, Australia, South Africa, Germany and India

  11. .hmc.

  12. .hmc.

  13. .hmc. • Systems avoid over wetting of belts, which causes belt slipping & excess maintenance in all stage. • Auto activation of systems (switch on/off) • 100% fail-proof (mechanical activation) on extra manpower required • Operates at belt speed from 100 FT/MIN to 750 FT/MIN.(1mtr per sec) • No extra power supply is needed to operate the system. (Power saved = Power produced), Maximum working pressure 105 bar • Best performance can be expected at water pressure @ • (Min 6-10 bar / max 70-100 bar) • spray can be in form of water droplets / mist / Cold Fog (hydraulic atomization) Dry Fog (air & water) to suit your requirement • System can be installed in maximum 4hrs time without any modification • Space required is under the belt, no ducting, installation of bag/filters etc • Engineered system & custom designed to every specific need • Reduced periodical clean-up &system failure • Maximum return of investment (years of trouble free services) • Maintenance free system tested in operating condition • AT CHP / TP OF COAL INDIA SECL, NCL, WCL, SCCL, • POWER PLANTS OF NTPC/ STATE ELECTRICITY POWER Co

  14. .hmc. Auto Belt Spray Video

  15. .hmc. Pendulum Valve

  16. .hmc. Pendulum Valve

  17. .hmc.

  18. .hmc.

  19. .hmc. Hopper Unloading Spray Video

  20. .hmc. Pendulum Valve • Extra features • fireresistant paddle • cam adjustment for opening • adjustable pendulum length • What would happen if you did not have it? • dust would be created at transfer point

  21. .hmc. Y Strainer

  22. .hmc. Y Strainer

  23. .hmc. Y Strainer • Extra features • robust for mining environment • What would happen if you did not have it? • water supplied would be contaminated, valve seats damaged and sprays blocked

  24. .hmc. Sprays

  25. .hmc. Sprays

  26. .hmc. Sprays

  27. .hmc. Sprays

  28. .hmc. Sprays • Extra features • robust for mining environment • offer customized spray bars • What would happen if you did not have it? • dust would not be suppressed

  29. .hmc. Contact Us HMC Equipments Pvt. Ltd. Sector–A, Block-D, Plot no:- 4 Industrial Area Sirgitti Bilaspur Chhattisgarh - 495004 India Ph: +917752- 323755/261015 Fax No: +917752-261015 mobile: +9194252-19536 E-Mail: info@hmcindia.co.in Web: www.hmcindia.co.in Regd. Office:-Himalayan House, Mungeli Road Bilaspur, Chhattisgarh Pin - 495001 India

More Related