1 / 10

2G BBULBE PASS Instructions-4 Replacement of bubble generator

2G BBULBE PASS Instructions-4 Replacement of bubble generator. Bubble generator. Instructions. 1. Take off water inlet and outlet fittings. 2. Deflate spa. 4. Remove the air pipe. 3. Remove cord grip with screwdriver. Instructions. 5. Take out control box from spa pool.

verena
Download Presentation

2G BBULBE PASS Instructions-4 Replacement of bubble generator

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 2G BBULBE PASS Instructions-4 Replacement of bubble generator

  2. Bubble generator

  3. Instructions 1. Take off water inlet and outlet fittings 2. Deflate spa 4. Remove the air pipe 3. Remove cord grip with screwdriver

  4. Instructions 5. Take out control box from spa pool 6. Remove the foam 7.Loosen the screws on the top lid 8. Remove the top lid

  5. Instructions Filter Transformer output Bubble Power input 2 PIN -Sensor Transformer input 3 PIN- water switch Heater

  6. Instructions 9. Disconnect the wires 10. SPApower panel 12. Remove the top lid of bubble generator 11. Remove the middle part of control box hull

  7. Instructions 13. Replace the bubble generator 14. L/N wires should be separated 15. Screw back the top lid of bubble generator 16. 2 seal rings should be in good shape

  8. Instructions 18. Connect the wires 17. Assembly the middle part of control box hull 19. Put on the top lid back 20. Put on the foam

  9. Instructions 21. Assembly the control box 22. Pull out the air pipe through spa tub 24. Screw back water inlet and outlet tightly 23. Connect the check valve with spa tub

  10. Thanks for your listen respectfully Please give your valuable opinion!

More Related