1 / 11

K0 meeting CDC and SDC and others

K0 meeting CDC and SDC and others. 2006/11/15 N Maruyama. Comparison of previous Exp. Both ASD threshold is lower (400mV(common) ---> 170mV(CDC), 240mV(SDC) ) CDC It is made not to read the signal of the wires that hit beam directly SDC repair ( change the (burned) straws).

waneta
Download Presentation

K0 meeting CDC and SDC and others

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. K0 meetingCDC and SDC and others 2006/11/15 N Maruyama

  2. Comparison of previous Exp. • Both • ASD threshold is lower (400mV(common) ---> 170mV(CDC), 240mV(SDC) ) • CDC • It is made not to read the signal of the wires that hit beam directly • SDC • repair ( change the (burned) straws)

  3. plateau curve (CDC)

  4. plateau curve (SDC large)

  5. plateau curve (SDC small)

  6. plateau curve (SDC middle)

  7. rate dependence (CDC)

  8. rate dependence (SDC)

  9. effect of masking wire Sep run194 Nov run399 by not reading some wire, improve the shape of hit pattern.

  10. others - analysCorrelation IHL AMT TDC Daq1 PC OHVL check correspondence OHVR TKO TDC OHHL Daq2 PC OHHR

  11. skip event condition • If there are AMT TDCs in relation to all TKO TDCs, this event is good. • check correspondence of ①current TKO and AMT event, ②current TKO and previous AMT event, ③previous TKO and current AMT event. • If there follows ② 4(in program skipparam1) event, and if in those event less than 2(in program skipparam0) ① event, skip daq2 event. same goes for daq1. But there have been same bugs yet. I will remake it.

More Related