1 / 15

Transmit Coils Receive Coils Transmitter Electronics Receiver Termination Electronics

Outline. Transmit Coils Receive Coils Transmitter Electronics Receiver Termination Electronics Coil Assemblies. Transmitter Coils X,Y,Z. X:Outer Vert coil is 36 turns # 12, 2.86 mH . and the coil is 6.5 lbs. and 37 3/4" x 28”. Y: Inner Vert coil 3.1 mH, 36 turns #13, 3.1 mH . and

wayne-neal
Download Presentation

Transmit Coils Receive Coils Transmitter Electronics Receiver Termination Electronics

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Outline Transmit Coils Receive Coils Transmitter Electronics Receiver Termination Electronics Coil Assemblies

  2. Transmitter Coils X,Y,Z X:Outer Vert coil is 36 turns # 12, 2.86 mH. and the coil is 6.5 lbs. and 37 3/4" x 28”. Y: Inner Vert coil 3.1 mH, 36 turns #13, 3.1 mH. and the coil is 6.4 lbs .and 37 3/4" x 26 3/4”. Zs:H coil Upper 1.4 mH, 22 turns #12, 1.4 mH H coil Lower 1.4 mH, 22 turns #12, 1.4 mH H coils series, adding 3.0 mH, 44 turns #12 Horizontal coils weight is 16 lbs. , coils and frames are 39 1/8" square.

  3. Transmitter Pulser Schematic

  4. Transmit Coils

  5. Receive Coils (16 total) • 6” inner radius, 3/4” wide, 500 turns #26 formvar wire, wound on a Delrin spool. • The Resistance is 35 Ohms, the Inductance is ~70 mH., the uncompensated ring frequency is ~65 kHz., terminated with 10 foot shielded twisted pair. • The R/C network is tuned to ring at 15 kHz. and is critically damped. • An aluminum foil/ fiberglass tape is insulated/layered and provides a non-shorting shield. • An additional tape layer is the final covering. • The coil ties to a 3 pin plug:1-shield, 2-coil inner lead, 3-outer coil lead.

  6. Coil Termination Network

More Related