1 / 30

Calorimeter technologies for forward region instrumentation

Calorimeter technologies for forward region instrumentation. K. Afanaciev 2 , R. Dollan 1 V. Drugakov 2 , C. Grah 1 , E. Kouznetsova 1 , W. Lange 1 , W. Lohmann 1 , A. Stahl 1 1 DESY, Zeuthen 2 NCPHEP, Minsk. Beam Calorimeter : requirements and possible options . ILC bunch:

xanthe
Download Presentation

Calorimeter technologies for forward region instrumentation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Calorimeter technologies for forward region instrumentation K. Afanaciev2, R. Dollan1 V. Drugakov2, C. Grah1, E. Kouznetsova1, W. Lange1, W. Lohmann1, A. Stahl1 1 DESY, Zeuthen 2 NCPHEP, Minsk

  2. Beam Calorimeter : requirements and possible options • ILC bunch: • small size • high charge • -> beamstrahlung : -> high energy deposition in the BeamCal • BeamCal: (4-28) mrad • fast beam diagnostics • detection and measurement of high energetic electrons and photons at very small angles

  3. BeamCal: requirement and possible options ~15000 e+e- per BX (10 – 20 TeV) ~10 MGy / year for some area => • radiation hard material • with small Moliere radius Heavy crystal Diamond/Tungsten sandwich

  4. BeamCal: performance simulations diamond/tungsten PbWO4 ½ RM 1X0

  5. Diamond/Tungsten BeamCal: reconstruction efficiency: Fake rate is less then 1% chain of towers at φ = 90° (the most affected) Cells are colored when the efficiency is less then 90% Electrons with energy more then 100 GeV are identified fairly well

  6. PbWO4 BeamCal: reconstruction efficiency: Fake rate is less then 1% segment geometry

  7. CVD Diamond Measurements: Sr90 ADC PA delay diamond discr & Gate discr scint. PM1 PM2 Samples CVD - polycrystalline: • Fraunhofer Institute (Freiburg) • Element6 • GPI (Moscow) Measurements: • Current-Voltage • Charge Collection Efficiency (Charge Collection Distance) Qmeas/Qcreated = CCD/L Qcreated(MIP) = 36 eh/mm

  8. CCD vs HV, time E61: before irradiation HV 100/200/300/400 V Timing 30/30/30/90 min ~30%

  9. CCD vs HV, time FAP6: before irradiation HV 100/200/300/400 V Timing 30/30/30/60 min

  10. ~ 0.60 Gy/h ~ 0.15 Gy/h ~20% CCD vs dose: E61: Stable current ~0.3 nA

  11. CCD vs dose: FAP2:

  12. Test Beam : Linearity measurements at High Occupancy Hadronic beam, 3 & 5 GeV Fast extraction ~105-107 / ~10ns Scint.+PMT& Diamond (+ PA) gate signal ADC

  13. Test Beam : Fast Extraction – no PA is needed 17 s 10 ns E6 FAP21

  14. Test Beam : Linearity - some results PMT2 vs PMT1 PMT2 PMTs diamond vs PMT1 diam all pads PMT1 PMT1

  15. Conclusion I: diamond/tungsten option: • Simulation studies shows feasibility of the diamond/tungsten option • Properties of different sensors vary in a wide range • The set of measurements gives information on suitability of a sensor for the BeamCal • This tests together with material analysis (Raman spectrometry, Photoluminescence analysis, Thermally Stimulated Currents) should lead to an optimal choice of the BeamCal sensor material

  16. Heavy Crystal BeamCal with fiber readout • crystals cut into segments in depth • optical isolated fibers • readout with photodetectors material • radiation hard • dense • high lightyield Fiber readout: • lightyield reduction ? • crosstalk between segments ?

  17. SetUp μ- Cosmic - Teleskop Absorber Discriminator PMT - Signals Triggerlogic ADC TDC File direct readout BCF-91A - Fibers: Λ(max. emission) 494 nm -> QE(PMT-XP1911) 13 ± 2 % fiber readout

  18. Direct vs Fiber Readout : example direct readout Absorber fiber readout Absorber

  19. Direct vs Fiber Readout : results Plastic Scintillator Leadglass Direct readout : (QEPMT 25 ± 1 %) Photoelectrons : 390 ± 50 p.e. / µ Lightyield : 1560 ± 260 photons / μ Direct readout : (QEPMT 15 ± 2 %) Photoelectrons : 18.2 ± 2.2 p.e. / µ Lightyield : 120 ± 30 photons / µ Fiber readout : (QEPMT 13 ± 2 %) Photoelectrons : 2.4± 0.5 p.e. / µ Lightyield : 19± 7 photons / µ Fiber readout : (QEPMT 13 ± 2 %) Photoelectrons : 27 ± 4 p.e. / µ Lightyield : 210 ± 60 photons / μ Lightyield reduced to 14 ± 4 % Lightyield reduced to 16± 7 %

  20. Simulation of lightyied reduction GEANT4 • Relevant processes provided by GEANT4, that have to be understood: • Scintillation • Čerenkov radiation • Transport of optical photons in the medium • Reflection • Scattering • photons at material boundaries • Absorption • Reemission • wavelength shifting

  21. Simulation of lightyied reduction geometry Scintillator sample WLS Fiber Air gap Tyvek wrapping Fiber core: Polystyrene, n=1.6 Fiber cladding: Acrylic, n=1.49 Fiber diameter: 1mm, Cladding thickness: 3% of core Ø Channel: 1mmx1mm Optical glue: Epoxy, n=1.56 Scintillator: Polyvinyltoluene, n=1.58

  22. Simulation of lightyied reduction illustration Single muon events Optical photons coupled into the fiber Directly attached to scintillator sample Directly attached to fiber surface PMT Window: Ø 15 mm, thickness 2mm Short absorptionlength -> all photons absorbed Scintillation yield: 50 γ/MeV

  23. Simulation of lightyied reduction plastic scintillator – direct vs fiber readout Spectrum of γ‘s absorbed in the PMT Spectrum of γ‘s absorbed in the PMT in the PMT detected photons per μ Direct readout Fiber readout • γ‘s from Scintillation • γ‘s from Čerenkov • γ‘s from WLS

  24. Simulation of lightyied reduction leadglass – direct vs fiber readout Spectrum of γ‘s absorbed in the PMT Spectrum of γ‘s absorbed in the PMT in the PMT detected photons per μ Fiber readout Direct readout • γ‘s from Scintillation • γ‘s from Čerenkov • γ‘s from WLS

  25. Simulation of lightyied reduction results Plastic Scintillator Leadglass (exp.): Lightyield reduced to 14 ± 4 % (exp.): Lightyield reduced to 16± 7 % (sim.): Lightyield reduced to 8.3 - 12 % (sim.): Lightyield reduced to 9.3 – 9.8 %

  26. Conclusion II: Heavy crystal option: • performance simulations are promising • exp.: lightyield reduced to ~15 % due to fiber readout • fiber readout works • first naive lightyield simulations in good agreement with • experimental results • next steps to include lightyield simulations in the performance simulation • for realistic simulation: • implementation of realistic boundary- and • surface conditiond of the materials and samples • exact WLS-absorption spectrum • better understanding of absorption- and emissions- • behaiviour of the materials • material composition

  27. BeamCal: new physics searches: μ- e ~ μ- χ0 μ+ Z0 ~ μ+ e+ χ0 - e - e g m - m + g + + e e The Physics: production of SUSY particles Signature: μ+ μ-+ missing energy σ ~ 102 fb (SPS1a) The Background: two-photon events Signature: μ+ μ- + missing energy (if electrons are not tagged) σ ~ 106fb NEED: - Excellent electron identification efficiency - Coverage down to as small angle as possible

  28. IV Measurements: • E61 – “Element6”: • 1X1 cm metallization • 500 mm thickness • C = 9.7 pF • FAP6 – Freiburg: • 1X1 cm metallization (4 pads) • 470 mm thickness • C = 9.9 pF

  29. ~50% ~ 0.15 Gy/h ~ 0.60 Gy/h CCD vs dose: FAP6:

  30. Test Beam : Fast Extraction - some results: PMT2 PMTs pad1 pad2 PMT1 diam pad3 pad4 all pads PMT1

More Related