2.37k likes | 5.39k Views
Basic civil engineering. Ram Humbare. Transportation engineering. Introduction:- Transportation engineering deals with design ,development ,construction and maintenance of roadways , railways, airports, docks and harbours, tunnel , bridges etc.
E N D
Basic civil engineering Ram Humbare
Transportation engineering • Introduction:- Transportation engineering deals with design ,development ,construction and maintenance of roadways , railways, airports, docks and harbours, tunnel , bridges etc. in other words, it deals with transport of man & materials , through different communication routes as land, water and air.
Transport • Transport:- The term transport is derived from the latin word ‘transportare’ . Trans means over &portare means carry i.e transportation means to carry from one place to another .
Modes of transport Transport can be divided into three types as follow: • Land transport • Water transport • Air transport
Land transport Major types :- • Roads • Railways
roads • Road network plays an important role in development of country & interior development of different areas of country. • Function:-to connect all cities, towns and villages.
Types of road • National Highway(N.H) • State Highway(S.H) • District Road • Village Road • Express Road
National Highway • It connect capital cities of state. • Width of road is 7 to 15 m. • Carries fast and heavy traffic. • Speed limit is @ 80kmph • Important road link to transport men and materials effectively.
State Highway • It connect national to district places in state. • Width of road is 7 to 10 m. • Carry medium to fast traffic. • Speed limit is @ 60 to 80kmph.
District highway • It is two part:- (a)Major district road.(b)other district road. • Width of road is 5 to 8 m. • Connects district places to taluka place. • Speed limit is @ 60kmph. • Carry moderate traffic
Village road • It connect village to district road • Width of road is <5 m. • Very high traffic is expected. • Speed is @ 40kmph.
Express highway • Heavy and very fast traffic is expected. • No crossing are provided. • Two wheelers & three wheelers are not allowed. • Speed is @ 100kmph.
Road based on materials • Earthen roads. • Water bound machadam roads. • Bituminous or tar roads. • Cement roads
Earthen road • It is also called kuchha roads. • Local earth is used in construction of these roads. • These roads are provided in village areas.
Water bound mechadam roads • WBM roads are provided in village areas. • WMB also act as the compact base for the bituminous road and concrete road. • The large sized stones are laid in the bottom course. • Broken stone of 25 mm to 75 mm are laid in three layers on prepared subgrade.
Bituminous roads • It is flexible pavement. • Bitumen act as binder, holds all material together. • First WBM surface prepared and then stone chips of 16 to 20 mm with bitumen are laid. • Thickness of this layer is 30 to 40mm. • Smooth wearing course provided at the top. • Durability is less as compared to concrete road. • Corrugations are developed.
Concrete road • It is Rigid pavement. • It is more durable. • Cement act as a binder. • Corrugation are not developed. • Less maintenance cost but repair difficult. • It comprise of wearing surface on top, the base course below and sub-base at the bottom.
Types of Pavement • There are two types of pavement. • Flexible pavement. • Rigid pavement.
Flexible pavement • These pavements acquire the shapes of underlying base course layers on application of load. • Strength and rigidity is less as compared to rigid pavements . • e.g. 1) Bituminous pavements 2) WBM roads 3) stabilized soil bases.
Rigid pavements • These pavements do not acquire the shape of underlying base course layers on application of load. • These pavements have good strength durability. • They also have more stiffness and thickness • e.g.1)concrete roads.
railways • Railways play an important role in bulk transportation of men and material all over country. • Indian railway possesses largest rail network in Asia. • Delhi metro rail is one of the advance developments in Indian railways.
gauge • Definition: “A clear distance between inner faces of rail.” • Two rails run parallel to each other and maintain gauge distance between them.
Zones • South central railways • South-eastern railways • North-western railways • North-east frontier zone • Central railways • westernrailways • Eastern railways • North-eastern railways • Southern railways
bridges • Definition:- “bridges can be defined as an over ground construction to cross over obstacles safely without disturbing the natural way below it.”
Importance of bridges • It connect town and cities. • In case of war destruction of bridges affect mobility of army and essential good. • Bridges engineering has special important in military engineering.
Types of bridges • Culverts - up to 06 m • Minor bridges - 6 to 30 m • Major bridges - over 30 m
tunnels • Definition :- tunnel can be defined as , “ an artificial under ground passage to by pass obstacles safely without disturbing the overburden i.e. land above it , to carry freights, passengers sewage, water etc.
Advantages of tunnels • Tunnel are more economical than open cuts beyond the certain depth. • In case of war, tunnels give the better protection. • Tunnels prove cheaper than the bridges and open cuts to carry gas, electrical lines. Etc • Cost of road project is deceased because of shortening of distance. • Freedom for snow and iceberg hazard in cold countries.
Disadvantages of tunnels • Initial cost of construction is high. • Very heavy machinery, skilled labour is required for tunneling . • Time required for construction is more.
Classification of tunnels • a) off-spur tunnels • b) saddle or base tunnels • c) slope tunnels • d) spiral tunnels
Classification depends on purpose • a) conveyance tunnels • b) Traffics tunnels
Classification depends on soil • a) Tunnels In hard rock . • b) Tunnels in soft material. • c) Tunnels underneath river bed.
Water transport • Type of water transport:- • Inland water transport • Ocean water transport
Inland water transportation • It is in the term of: a) River b)canal • River transportation is popular is in rivers like in Gangas.
Ocean water transportation • Ocean transport is used for the trade and commerce. • Ocean transportation has no limitation and possesses high flexibility. • For national defence navy is established.
Advantages of w.t • It provides the powerful defence in emergency of national security. • It is cheapest transportation. • It is help to development of industry and international trade. • Load carrying capacity is more. • Cheap motive power is required for its works.
Disadvantages of w.t • It is slow and consume more time. • Chances of attacks on naval ships by pirates. • Chances of accident due to climate disasters such as storms, cyclones etc. • Specific water level should be maintained in canal transportation.
harbours • Definition:- “A haven or road stead of navigable waters well protected naturally or artificially from action winds ,waves and is located along sea shore or river estuary or lake or canal connected to sea. • Horbour is a place where ships, boats, and barges can seek shelter from stormy weather, or else are stored for future use.
Classification depends on protection needed • a) Natural harbour. • b) semi-natural harbour. • c) Artificial harbour .
Classification depends on utility • a) military harbour. • b) harbours of Refuse. • c) fishery harbours. • d) commercial harbours. • e) marine harbours.
Classification on location • a) Canal harbourss. • b) River or estuary harbour. • c) lake harbour. • d) sea or ocean harbour.
docks • Definition:- “ an area of water for building or repairing or loading and unloading ships or ferries.” • For unloading and loading of cargo ship required of days. • It is used to avoid the inconvenience .
Types of docks • 1)Wet docks:- docks used for berthing of vessel for loading and unloading of cargo and passenger are called ‘wet docks’. • 2)Dry docks:- docks used for repair of the vessels are called as ‘dry docks’.
Air transport • Air transport is the fastest mode of transport, with speed more than 300kmph. • It is also three times speed of the sound
Advantages of a.t • It does not required any tracks as in case of roads and railways. • It is fast and speedy. • It is highly used in case of disasters i. e floods, cyclones etc. • Useful in national defence. • It can be also used for aerial photography.
Disadvantages of a.t • Flight rules have to be followed strictly for smooth working of air transport. • It is more costly. • Frequency of accident is less but damage is tremendous. • It can be affected by weather.