1 / 19

VM SERIES

Toa public adddress presentation

MMS
Download Presentation

VM SERIES

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. VM-2000 VM-2120, VM-2240 Mixer Amplifier Features & Functions

  2. Features

  3. Features (1) INPUTS: • 2 BGM Inputs • 3 Mic/Line Inputs • 1 Telephone Input • Remote Microphone Input (for up to 4 RM-200M) • 100V Speaker Line • Power Amplifier Input

  4. Features (2) OUTPUTS: • Speaker Line Outputs: • 120W: VM-2120, 240W: VM-2240 • 100 volts (70 or 50 volt by simple modification) • 1 Direct • 5 Zones (with ON/OFF Switch and Attenuator) • 1 Line Output pre-master • 1 Line Output post-master • 1 Recording Output

  5. Features (3) • 5 priority levels are provided: Emergency: highest priority 4 priority levels (1 - 4) • Remote-Controlled Power-ON the VM is always in stand-by mode, to be switched on by external equipment (e.g. central system in emergency case) • Emergency Power (24V DC) Inlet • Cascading 9 VM-2000 9 VM-2000 can be combined to obtain up to45 zones and more output power

  6. Features (4) • Surveillance Functions: • Failure Indication on Remote Microphone and VM • Monitoring • CPU • the Communication with Remote Microphone • the voice message unit EV-200 and its memory card • Optional Surveillance Functions: • Monitoring • Speaker Line • Amplifier • Optional Voice Message Functions: • 7 Messages • 5 for commercial purpose • 2 for emergency purpose • 1 Chime

  7. Appearance

  8. Emergency and Fault Indication LED Level meter Mic/Line Inputs Master volume Zone buttons Power switch(stand-by) BGM Inputs Zone Attenuators All-call button Appearance Front Emergency and Fault Indication LED Emergency and Fault Indication LED Emergency and Fault Indication LED Emergency and Fault Indication LED EMERGENCY FAULT

  9. Line inputs+ outputs Surveillancemodule BGM inputs w. level Voice message module AC mains 24V DC Mic/lineinputs Link remote mics, VM Speakerconnector Control I/O Telephone input,priority control in Volume telephone, chime, remote mic Setting DIPswitches Appearance Rear

  10. TREBLE BASS BGM BGM Inputs 2 BGM Inputs • 2 RCA/Cinch connectors (Stereo  Mono) • 2 attenuator for each channel (pre-adjustment) • Volume, bass & treble control • Mute-level can be set: • -∞∞, -28, 0 dB: to allow just mixing, keeping BGM present during paging or to switch off • BGM has always lowest priority (priority level 4) • Assignment to Zones • The BGM signal can be routed to the zones selected by the front panel’s zone switches

  11. Control inputs (busy)on clamp terminal Inputs 1-3 (1) 3 MIC/LINE Inputs (Inputs 1~3) • combined XLR / phone jacks, balanced • Input 1 with additional DIN jack • control input included • Volume, bass & treble control • Selectable sensivity: • microphone (-60 dBV) or line signal (-10 dBV) • Phantom power: • can be switched on or off for all simultaneously when set to microphone sensivity Rear

  12. Telephone Input 1 Telephone Input • Push-in terminal block (balanced) with control input Sensivity: -10 dBV • Connection to a PABX system with an audio output and control signal output • Priority level 1 or 2 • Pre-announcement chime can be set ON or OFF Rear PCB

  13. VM-2000 (master) RJ45 Remote Microphone RM-200M Connection of up to 4 remote microphones • parallel connection in „daisy chain“ • using RJ45 connectors and category 5 cables (4 pairs with shield) * external power supply necessary for more than 1 remote microphone(AD-4800 ER, part code 100-07-291-80)

  14. Priorities • Absolute Priority 5 priority levels are provided: • Emergency: highest priority • 4 priority levels (1 - 4) • Relative Priority when inputs of the same priority level (1 or 2) are activated at the same time, valid for all inputs with control • last-in-first-out (LIFO) and first-in-first-out (FIFO) • unit no. Priority only for RM-200M and messages 1 - 5 • Mixing • in priority level 2: “priority 2 mixing” is set • in priority level 3

  15. Chime Tones • 6 Internal Chime Tones: • 2-tone chime • 2-tone chime (fast repeat) • 4-tone chime (up) • Single-tone chime • 4-tone chime (up: pre-, down: post-announcement) • Gong • 1 pre-recorded chime on EV-200 • recorded on memory card as message 8 • Westminster chime

  16. Emergency

  17. Emergency • The VM-2000 is a system managing amplifier with VA (Voice Alarm) functions So, it can be set into the Emergency Mode by: • depressing the remote microphones emergency key • external control: - starting the ALERT function - starting the EVACUATION function The Emergency mode can be stopped only by external control ! To avoid switching off easily

  18. MITRA MANDIRI SELARAS Jl. Jatijajar II No. 66 Depoktlp : 021-8743542

  19. The End

More Related