40 likes | 168 Views
Module Assembly. Module assembly plate. Need to change vacuum pattern Need to find better method of sliding on location pins Might not be relevant as vacuum can be linked to all issues seen so far Hard to tell is sensor is against pins, especially with “straw” sliders
E N D
Module assembly plate • Need to change vacuum pattern • Need to find better method of sliding on location pins • Might not be relevant as vacuum can be linked to all issues seen so far • Hard to tell is sensor is against pins, especially with “straw” sliders • Landing pins might be moving/hard to set height
Sensor-to-hybrid glue • Need to pick best method of stencilling on hybrid • Does stiff metal cause leakage? How uniform is the thickness? • Need to find better glue if possible which won’t need pre-curing • Higher viscosity • Work life >20min, < 2 hours • Cure time at room temperature <8 hours, <4 hours lets you reuse plates in a day
More Module Assembly • Assembly Frame • Is this useful at all? • Module Bonding Plate • Leakage of vacuum because test frame • Hard to bond ends due to lack of support • Final hybrids don’t overhang