1 / 14

Preliminary Electron Transportation Channel Project for EIC Facility ( FAIR, Germany)

Preliminary Electron Transportation Channel Project for EIC Facility ( FAIR, Germany). Dmitry Berkaev Budker Institute of Nuclear Physics, Russia, 630090, Novosibirsk, Lavrentev ave ., 11 Novosibirsk State University, Russia, 630090, Novosibirsk, Pirogova str., 2.

annona
Download Presentation

Preliminary Electron Transportation Channel Project for EIC Facility ( FAIR, Germany)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Preliminary Electron Transportation Channel Project for EIC Facility (FAIR, Germany) Dmitry Berkaev Budker Institute of Nuclear Physics, Russia, 630090, Novosibirsk, Lavrentevave., 11 Novosibirsk State University, Russia, 630090, Novosibirsk, Pirogova str., 2

  2. Electron-Antiproton Ring b-functions at Injection Point: bx = 226 cm, ax= -1.43 bz= 159 cm, az= -0.1 yz = 54 cm Main EAR Parameters (500 MeV)

  3. 500 MeVLinac General View (Figure of P. Logatchev).

  4. Beam Injection into EAR Injection at x = 16 mm

  5. Beam Transportation Four 38O magnets and 21.2O septum beam transportation channels. Length ~21.8 m.

  6. Beam Focusing b, cm y, cm Focusing with 13 Quads – two aims: matching of beta-functions of the ring and channel and avoid large beam sizes. Max gradient – 8 kGs/cm

  7. Beam sizes in the Channel x, cm

  8. Magnetic Elements • 38o Bending Magnet

  9. Magnetic Elements • 21.2o Septum-Magnet

  10. Magnetic Elements • Quads and Steering Coils Max Field– 0.5 kGs Max gradient – 8 kGs/cm Quads and steering coils are the same as in the Linac (Figures of P. Logatchev)

  11. Beam Position Monitors 7 BPMs along the channel

  12. Beam Position Monitors Wall Current Monitor Secondary Emission Monitor No beam shape, Nonlinear at largedeviations Destructive, тransparency ~98-99%

  13. Difficulties • Injection in non-zero dispersion point • Injection from outside the ring • Large Linac energy spread (1%). • Possible solution: Rise the beam above the EAR and inject in “correct” place…

  14. Conclusion • Preliminary design of injection scheme for EAR (FAIR EIC Project) is presented. It is shown that injection can be done into the straight section before the bending magnet . • Kicker of feasible parameters (50 kV, two plates, 52 cm) can store injecting beam in EAR at the maximum energy of 500 MeV. • Preliminary geometry of electron injection channels for EAR (FAIR EIC Project) is presented. Total length of the channel is about 21.8 meters. Injection occurs into straight section before bending magnet in horizontal plane with 10 kGs septum-magnet. • Four main 9.94 kGs magnets provide beam transportation from Linac to EAR. Preliminary estimation of these magnets shows achievable parameters of fields and power consumption. • Beam focusing done with 13 Quads with 8 kGs/cm gradient. • 7 BPMs seems to be used in the channel. • Injection occurs at the point with non-zero dispersion, so the next task is to simulate injection with taking into account energy deviation questions.

More Related