1 / 6

MKI

MKI. Timber Add magnet and tube temperatures FESA Add “spark timer” and “spark timer remaining time” Add remaining conditioning validity in sec (10sec) Add shot by shot logging for MAIN switch currents A ll secondary voltages Primary RCPS currents ( tbc ). MKI.

armine
Download Presentation

MKI

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. MKI • Timber • Add magnet and tube temperatures • FESA • Add “spark timer” and “spark timer remaining time” • Add remaining conditioning validity in sec (10sec) • Add shot by shot logging for • MAIN switch currents • All secondary voltages • Primary RCPS currents (tbc)

  2. MKI • Increase fast interlock sensitivity • Reduce inhibit threshold from 15kV  7.5kV • Deploy new release of KITS • Improved diagnostic for missing kicks • Install new version of CIBO into FIB (remove when not used???) • Jitter issue • Install new Timing Pulse Adapter (TPA) • Re-check / re-sync AGK • IPOC on AGK??? • Fine synchronization

  3. MKQA • ….

  4. LBDS • Install generator monitoring system • Infrastructure (FEC, Ethernet, Timing…) • Will probably not be finished (delay in the delivery of the digitizers) • Upgrade TSU (Audit follow-up) • Meta-stability • Redundancy in case of internal failure • Install TSU IPOC • Upgrade BEM embedded firmware • BETS / PLC communication errors at 450 GeV

  5. LBDS • Re-cabling TFO outputs • Check re-triggering system • Change PT100 cabling (sense) • 0.5° error on absolute value

  6. TCDQ • Implement “Collimator” state machine in low level software • Implement independent sequences for TCDQ • Check offset (~0.1mm) during function execution • Seems to be mechanical • Add TCDQ positions in XPOC

More Related