1 / 8

What is the Process of ALS system

Inthis you will get the information about ASL System Process

baseoilsn
Download Presentation

What is the Process of ALS system

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Butterfly General Trading Company http://butterfly.co.com/

  2. What is the Process of ALS system In those cases, where there is requirement of more than one lubricant, often automatic lubricant system is the ideal one. ALS systems come in different quality and design but meet the similar purpose. This is introduction of right lubricant and in right amount automatically. Using this system you need to track the supply of any lubricant in the system which may be Bright stock 150 or oil.

  3. Each ALS work in a defined set such that it mainly consists of five main components: • A controller • A pump and reservoir • A supply line connecting the pump • A metering valves or injectors • A feed lines and fittings

  4. The process of ALS system: • Right progressive system is formed whether in a single line or multiple. • A pump is then used to delivers the lubricant to the required lubrication points. • This is done through progressive metering valves which are available in custom-sized. • This are fitted in each application point. Lubricant than starts to flows through a primary valve. • This will redirects it to multiple secondary valves.

  5. This will finally feed through multiple lines to reach to the ultimate application points. • Now the injectors will operate simultaneously independent of each other which will serves only one lubricant point. • This will continue to inject required lubricants whether it is Base oil sn1500or any other lubricants. • This need to accurately adjust to deliver the precise amount of lubricant or oil required in a point. • Further the parallel system is and the main line pressure is to be monitored consistently. • So, as to ensure that if feed line or bearing stops taking lubricant, the remaining points of the system continue to function normally

  6. It is important to remember that when it is about automatic lubricant system, it differ in nature. In such system, in case when any line or bearing is not taking grease the entire system will automatically shut down. It is thus important to ensure that there is visual indication included which can show this. This will allow the operator to take action before any damage occurs.

  7. When using automatic lubricant system, you need to make sure that which lubricant you need to use as per system requirement. If you need advance lubricants like Base oil Sn500, you must ensure that there remains right availability of these lubricants in a system.

  8. Contact Us: Contact : +965 99487111 Mail :ahmad@butterfly.co.com Country : Kuwait City : Kuwait City

More Related