1 / 5

IEEE P1581 Fringe meeting 26-10-2004 agenda

IEEE P1581 Fringe meeting 26-10-2004 agenda. Current status New input (Bob Russell) Follow up. IEEE P1581: Status. Draft overview: Draft 1.3 : at ITC2003 decided to finish draft as is and go for ballot (voted). Draft 1.4 textual update only (Sent for check up by KP)

benny
Download Presentation

IEEE P1581 Fringe meeting 26-10-2004 agenda

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. IEEE P1581Fringe meeting 26-10-2004 agenda • Current status • New input (Bob Russell) • Follow up

  2. IEEE P1581: Status • Draft overview: • Draft 1.3: at ITC2003 decided to finish draft as is and go for ballot (voted). • Draft 1.4 textual update only (Sent for check up by KP) • Draft 1.5 on website, reflector mail (30-06-’04) • Draft 1.6 added IEEE std formats. Sent for IEEE editorial review. • Draft 1.7 update with editorial comments updated. On website, email reflector (18-10-’04) -Ready for ballot-

  3. IEEE P1581: Status • Procedural: • at ITC2003 decided to finish draft as is and go for ballot • Now, ballot is ready to start • Last minute technical changes should not interfere with our previous decision for ballot Basic course of action: 1. Proceed with ballot and finish P1581. 2. New technical issues to be solved in updates of P1581.

  4. IEEE P1581: technical • Power up test mode (Bob Russell) • Discussion • Wait for ballot? • Make a dedicated test pin optional? • What ‘WE cycle’ is general enough? • Quick insertion prior to ballot possible?

  5. IEEE P1581: technical • Con • Timing issues between power up and EXTEST • Care should be taken in driving test values to a few specific pins. • Reentry not possible without power down • Pro: • new test mode overcomes the extra test pin • The test mode is transparent for non users An earlier test mode descriptions was like this one Also transparent and no pin but failed on the mentioned cons => WG decided to go for test pin approach.

More Related