360 likes | 462 Views
Western Wind and Solar Integration Study Site Selection Analysis 5/14/2008. Transmission Zones used in Site Selection. 2017 Load Analysis. “In Area” Sites. “High Capacity Factor” Sites. In Area Scenario. In Area Scenario. High Capacity Factor Scenario. High Capacity Factor Scenario.
E N D
Western Wind and Solar Integration Study Site Selection Analysis 5/14/2008
Summary Comments • Pre-Selected capacity represents existing and planned sites rounded up to nearest 30 MW. • Ignore “planned” sites in Scenario creation. • How much capacity can be reasonably exported (imported) at each area? • Assume constant energy between scenarios rather than constant number of plants: • Avg Wyoming C.F/Avg Arizona Plant = 49.1/32.0 = 1.53 • ~Roughly 2 MW of wind in Wyoming produces the same energy as 3 MW of wind in Arizona. • Initial Study Scenarios: Baseline (I.e. Pre-Selected Sites) • High Renewables: - In Area • Subsequent Scenarios: High Capacity Factor • “Constrained” High Capacity Factor
Summary Comments • Transmission costs estimated at $1350/MW mile. • New Wind plant costs estimated at $1750/KW. • Therefore saving a MW of wind capacity would pay for roughly 1300 miles of transmission. Phoenix, AZ to central Wyoming is about 650 miles, so a MW of Wind capacity would pay for the cost of 2 MW of transmission.
Summary Comments - Solar • How much existing Solar generation is there? • Can we ignore Solar in the Baseline? • Does existing Solar generation match up with CSP and PV site data?