1 / 14

DYE CONSUMPTION (TONNE)

DYE CONSUMPTION (TONNE). WORD FIBRE CONSUMPTION. CONSUMPTION (1000 TONNE). NH 2. NH 2. Na 2 SO 3. Na 2 SO 3. N. N. N. N. DYEING OF COTTON WITH DIRECT DYES. TYPICAL DYE STRUCTURE CONGO RED. DIRECT DYES. FEATURES PRESENCE OF SULPHONIC ACID GROUPS WATER SOLUBLE ANIONIC IN NATURE

clinton-talley
Download Presentation

DYE CONSUMPTION (TONNE)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. DYE CONSUMPTION (TONNE)

  2. WORD FIBRE CONSUMPTION CONSUMPTION (1000 TONNE)

  3. NH2 NH2 Na2SO3 Na2SO3 N N N N DYEING OF COTTON WITH DIRECT DYES • TYPICAL DYE STRUCTURE CONGO RED

  4. DIRECT DYES FEATURES • PRESENCE OF SULPHONIC ACID GROUPS • WATER SOLUBLE • ANIONIC IN NATURE • SUBSTANTIVITY/AFFINITY TO COTTON • APPLIED FROM AQUEOUS DYEBATH CONTAINING ELECTROLYTE • SIMPLE DYEING OPERATION • LOW WASH FASTNESS • WASH FASTNESS IMPROVED TO SOME EXTENT AFTER TREATMENT WITH CATIONIC DYE FIXING AGENT • WASH FASTNESS STILL NOT ADEQUATE COMPARED TO OTHER DYE CLASSES SUCH AS REACTIVE DYES

  5. DIRECT DYES USES • USED FOR DYEING OF LOW PRICED COTTON OR VISCOSE FABRIC, CUTAIN, FURNISHING OR CARPETS WITH GOOD LIGHT FASTNESS AND MODERATE WASH FASTNESS • CHEAP COTTON DRESSING GOWNS AND BED SPREADS WHICH ARE NOT WASHED REGULARLY • DUE TO LOW WASH FASTNESS, LIMITED USE. • BEING REPLACED TO GREAT EXTENT WITH REACTIVE DYES WHICH HAVE BETTER WASH FASTNESS AND PRODUCE BRIGHT SHADES.

  6. CLASSIFICATION • CLASSIFIED ACCORDING TO DYEING BEHAVIOUR CLASS A SELF LEVELLING • DYES WITH GOOD MIGRATION OR LEVELLING PROPERTIES i.e. DYES WHICH PRODUCE UNIFORM SHADE. NOT SENSITIVE TO DYEING CONDITIONS. CLASS B SALT CONTROLLABLE • UNIFORM SHADE PRODUCD ON CONTROLLED ADDITION OF SALT DURING DYEING CLASS C TEMPERATURE CONTROLLABLE • UNIFORM SHADE PRODUCED ON CAREFUL CONTROL OF DYEING TEMPERATURE AND SALT ADDITION

  7. EFFECT OF VARIOUS PARAMETERS ON DYEING TEMPERATURE • RATE OF DYEING AND PENETRATION INCREASES TEMPERATURE. DYES BEING HIGH MOLECULAR WEIGHT DYEING CARRIED OUT AT BOIL FOR GOOD PENETRATION. DYEING TIME • PRODUCTION OF LEVEL AND WELL PENETRATED DYEING IS FAVOURED BY INCREASED DYEING TIME. HOWEVER, PROLONGED BOILING CAUSES DECOMPOSITION OF MANY DIRECT DYES. THE DYEING TIME IS USUALLY 1 hr. AT BOIL LIQUOR RATIO • DYEBATH EXHAUSTION IS USUALLY DECREASED WITH INCREASE IN M:L RATIO. HOWEVER, UNIFORMITY OF DYEING IS IMPROVED.

  8. EFFECT OF VARIOUS PARAMETERS ON DYEING ELECTROLYTE • ELECTROLYTE IS ESSENTIAL FOR DYEING WITH DIRECT DYES • COMMON ELECTROLYTE USED COMMON SALT (NaCl) OR GLAUBER’S SALT (Na2SO4) • CONCENTRATION OF ELECTROLYTE IS GOVERNED • DYE CONCENTRATION: LESS SALT FOR LOW DYE CONCENTRATION • No OF SULPHONIC ACID GROUPS IN DYE MOLECULE: HIGH SALT WITH MORE No. OF SULPHONIC ACID GROUPS

  9. ROLE OF ELECTROLYTE • COTTON IN WATER : NEGATIVE SURFACE POTENTIAL • ANIONIC DYES DISSOLVED IN WATER : NEGATIVE CHARGE DUE TO IONOIZATION OF WATER SOLUBILIZING SO3Na GROUPS • DUE TO SIMILAR CHARGES: REPULSION BETWEEN DYE AND FIBRE SURFACE • FOR THE DYE TO GO ON FIBRE: NECESSARY TO REDUCE –Ve CHARGE OF FIBRE • ACHIEVED BY ADDITION OF ELECTROLYTE • ELECTROLYTE DISSOCIATE IN WATER, RELEASE +Ve CHARGE Na+ • Na+ ACCUMULATE AT THE –Ve CHARGED FIBRE SURFACE • NEUTRALIZE –Ve SURFACE POTENTIAL OF FIBRE • FACILITATE –Ve DYE MOLECULE ATTRACTION/ADSORPTION ON FIBRE

  10. BATCHWISE DYEING OF COTTON DYE DISSOLUTION • USE SOFT WATER FOR DYE DISSOLUTION AND DYEING. PASTE WITH COLD WATER. ADD SUFFICIENT QUANTITY OF BOILING WATER. STIRR. FILTR TO REMOVE ANY INSOLUBLE DYE PARTCLES • ADDITION OF 0.5-1 g/l WETTING AGENT HELPS TO WET OUT THE FIBRE DURING DYEING. GENERAL DYEING PROCEDURE CLASS A DYES • THE DISSOLVED DYE IS ADDED TO DYEING MACHINE • MAKE TO TOTAL VOLUME ACCORDING TO M:L RATIO • IF DYE IS SENSITIVE TO HARDNESS OF WATER, ADD 1-2 g/l SODIUM HEXAMETA PHOSPHATE OR SODA ASH • ADD SODIUM CHLORIDE, FOR PALE SHADE 5% OWM, MEDIUM SHADE 10%OWM AND HEAVY SHADE 20% OWM. • ENTER THE FABRIC AT 40-500C • RAISE THE TEMPERATURE TO BOIL IN 30-40 MIN. • CONTINUE DYEING AT BOIL FOR 30-45 MIN • RINSE WITH COLD WATER • AFTER TREAT WITH CATIONIC DYE FIXING AGENT. • DRY WITHOUT RINSING.

  11. CLASS B DYES SALT SENSITIVE DYES • ADD SALT IN INSTALMENTS DURING RAISING THE TEMP. TO BOIL • IF DESIRED SALT ADDITION MAY BE CONTINUED AFTER THE DYEBATH HAS REACHED TO BOIL. • ADDITION OF DISSOLVED SALT BY DRIP FEED METHOD IS PREFERRED

  12. CLASS C DYES TEMPERATURE SENSITIVE DYES • LOW ELECTROLYTE CONC. ADDED AT THE START • RAISE TEMP TO BOIL AT VERY LOW RATE • DYEING CONTINUED AT BOIL FOR 45-60 MIN. • SALT ADDITION SHOULD BE DONE IN INSTALMENTS AT BOIL. COMPOUND SHADES • PRODUCED BY USING TWO OR THREE DYES TAKEN TOGETHER • TAKE MIX DYES BELONGING TO THE SAME CLASS • DYES IN MIXTURE SHOULD HAVE SIMILAR RATE OF EXHAUSTION • DYE MANUFACTURER SHADE CARD GIVES INFORMATION ON DYE CLASS AND DYEING CONDITIONS • FOLLOW THE INSTRUCTIONS CAREFULLY AND FAITHFLLY.

  13. AFTER TREATMENT • INADEQUATE WASH AND PERSPIRATION FASTNESS OF DIRECT DYES • CAN BE IMPROVED BY AFTERTREATMENT AFTER DYEING • DIAZOTIZATION AND DEVELOPMENT • COPPER SULPHATE AND POTASSIUM DICHROMATE TREATMENT • FORMALDEHYDE TREATMENT • CATIONIC DYE FIXING AGENT: MOST POPULAR • FORMS COMPLEX WITH ANIONIC DYE. DECREASE IN DYE SOLUBILITY • TRETMENT CARRIED OUT USING 1-3%OWM CATIONIC AGENT AT 600C FOR 30 MIN AT pH 5 WITH ACETIC ACID. • NO RISING AFTER TREATMENT

  14. CATIONIC DYE FIXING AGENT

More Related