1 / 13

MDI/DNC MODE

MDI/DNC MODE. The HAAS Control Series. SLIDE LEGEND. PRESS THREE TIMES TO GET TO THIS PAGE (Continued on next slide) Note:. ACTIONS. To advance through the presentation click on your left mouse button or press < ENTER >. To exit press < ESC >. KEYS. INSTRUCTIONS.

darius-maynard
Download Presentation

MDI/DNC MODE

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. MDI/DNC MODE The HAAS ControlSeries

  2. SLIDE LEGEND PRESS THREE TIMES TO GET TO THIS PAGE (Continued on next slide) Note: ACTIONS To advance through the presentation click on your left mouse button or press <ENTER>. To exit press <ESC>. KEYS INSTRUCTIONS INFORMATION OTHER INFORMATION

  3. MDI/DNC MODE This module is intended to provide you with a familiarization of the MDI/DNC Mode on the Haas Control

  4. Here is where you find the MDI/DNC Buttons

  5. MDI/DNC Buttons MDI/DNC: COOLANT: ORIENT SPINDLE: ATC FORWARD: ATC REVERSE: Pressing the MDI/DNC button on the control the first time will display the Manual Data Input screen. Used to input and execute data without disturbing programs in memory. The second press turns on Direct Numerical Control. Used to execute a program from external devices. To enable DNC, Setting 55 must be ON. MDI Manual Data Input DNC Direct Numerical Control ATC Automatic Tool Changer

  6. MDI/DNC Button: MDI/DNC Button: Press<MDI DNC> This will bring up the MDI screen that will allow you to write to “scratch pad memory” and execute the commands. If you decide to save this program you can do so by entering a program number that is not in use and thenPress<ALTER> PROGRAM (MDI) O91002 N00000 ; NOTE: The MDI screen will go blank , but the program is now in the program list under the number you entered.

  7. MDI/DNC Button: MDI/DNC Button: Press<MDI DNC> a second time. This will bring up the DNC screen that will allow you to execute a program directly from an external device. Setting 55 needs to be ON for DNC to be activated. PROGRAM (DNC) O91002 N00000 WAITING FOR DNC . . . DNC RS232 WAITING FOR DAT

  8. Coolant Button: COOLANT Button: Press<COOLNT> This will turn on the coolant in any operation mode. A second press of the key will turn the coolant off. PROGRAM (DNC) O91002 N00000 WAITING FOR DNC . . . DNC RS232

  9. Orient Spindle Button: ORIENT SPINDLE Button: Press <ORIENT SPINDLE> This will rotate the spindle to the tool change position and lock it into place while in MDI/DNC mode. PROGRAM (MDI) O91002 N00000 ;

  10. ATC Forward Button: ATC FORWARD Button: ATC Automatic Tool Changer Press <ATC FWD> This will rotate the tool turret forward to the next tool in the sequence and put it in the spindle. NOTE: If a (Tnn) is defined in the input buffer, the turret will advance to that tool. PROGRAM (MDI) O91002 N00000 ; T5

  11. ATC Reverse Button: ATC REVERSE Button: ATC Automatic Tool Changer Press <ATC REV> This will rotate the tool turret in reverse to the next tool in the sequence and put it in the spindle. NOTE: If a (Tnn) is defined in the input buffer, the turret will advance to that tool. PROGRAM (MDI) O91002 N00000 ; T5

  12. Prepared by Haas AutomationTraining DepartmentOxnard, CA 93030

More Related