300 likes | 459 Views
Product Presentation 2007. SKY AIR Launch of new Non-Inverter + Duct (R22) series. NEW. Sky Non-Inverter R22 Heat Pump RY-series. +. NEW. Low Static Pressure Duct FDYB. and Medium Static Pressure Duct FDYM. Overview. 1. Product Line-up 1.1 Product Range 1.2 Combination Table
E N D
Product Presentation 2007 SKY AIR Launch of new Non-Inverter + Duct (R22) series
NEW Sky Non-Inverter R22 Heat Pump RY-series + NEW Low Static Pressure Duct FDYB and Medium Static Pressure Duct FDYM
Overview 1. Product Line-up 1.1 Product Range 1.2 Combination Table 1.3 Nomenclature 2. Benefits & Features 3. Product Characteristics 3.1 General Specifications 3.2 Operation Range 3.3 Refrigerant Circuit Diagrams 3.4 McQuay/Daikin Name Cross-over 4. Conclusion
1. Product Line-up 1.1 Product Range • The Non-Inverter RY R22 outdoor series will be available: • in combination with low/medium static pressure duct • in heat pump and with R22 refrigerant • in 1 and 3 phase power supply
1. Product Line-up 1.2 Combination Table • The indoor/outdoor combination will be available: • in a wide capacity range (2.7kW to 16.4kW) • in only Pair connection
Power Supply V1 : 220-240V, 1ph, 50Hz Y1 : 380-415V, 3ph, 50Hz Series C : C series Capacity 30 : kW x 10 1. Product Line-up 1.3 Nomenclature: Outdoor RY 30 C V1 Model Name & Type R : Outdoor Y : Heat Pump
Series C : C series Capacity 30 : kW x 10 Model Type B : Low static duct M : Medium static duct 1. Product Line-up 1.3 Nomenclature: Indoor - FDY B 30 C - M Model Name F : Indoor D : Ceiling concealed Y : Heat Pump Note: Indoors are 220-204V, 1ph, 50Hz
Double Protection Drainage System By introducing ‘Built In’ double drain pans solution, i.e. primary drain pan and secondary drain pan, water leaking will not be a problem anymore. A drain socket is supplied to connect both drain pans to the drainage pipe. The secondary drain pan will act as a drip pan to block any water that might be dripped down, thus offering an additional protection to the ceiling. So additional drain pan will not be necessary during installation which means more cost saving and easy installation at site. Primary Drain Pan (Polystyrene with High Impact Polystyrene cover) Secondary Drain Pan (with insulation) 2. Benefits & Features Space Saving with Easy & Flexible Installation The height of the unit is low, between 261mm (lowest) and 378mm (highest). Therefore it is offering greatest flexibility in selecting installation location above ceiling. Moreover with its special designed ducting, the installation job becomes easy and the conditioned air can be effectively distributed to every corner of the room to ensure a better air distribution and more pleasant environment for comfort living.
Versatility Different layouts can be ‘created’ so that multiple rooms can be cooled together at the same time by using just one indoor unit. Room Layout 2 Room Layout 1 Room Layout 3 Easy Maintenance The simple design concept has a friendly maintenance and servicing in mind. By just removing the secondary drain pan and drain guide, you can access to all the internal parts from the bottom of the unit. No water will flow down when removing the secondary drain pan, making the servicing work very easy. 2. Benefits & Features Elegance and Low Noise Level The indoor unit is installed above the ceiling with only the supply and return air grille exposed to view. This ceiling concealed type of design has made it an elegant model without sacrificing the precious floor space, the air-conditioned space will appear as elegant and prestigious as centralized air-conditioned area, but with only a fraction of the cost. Further the casing is well insulated internally to reduce noise level.
Electrical Control Capability All series are equipped with a wired Electronic SLM Remote Controller. The SLM features: an ON/OFF switch, temperature setting (16°C to 30°C), operation modes (auto/cool/dry/heat/fan), fan speed selection, timer (setting range between 1 to 10 hours), air swing and ‘Sleep Mode’. It is possible to make use of the AC-5300 infrared Remote Controller (in option) to communicate with the SLM Remote Controller. 2. Benefits & Features
3. Product Characteristics Low Static Pressure Duct – 1 phase 3.1 General Specifications GENERAL INDOOR OUTDOOR
3. Product Characteristics Low Static Pressure Duct – 1 phase 3.1 General Specifications GENERAL INDOOR OUTDOOR
3. Product Characteristics Low Static Pressure Duct – 3 phase 3.1 General Specifications GENERAL INDOOR OUTDOOR
3. Product Characteristics Medium Static Pressure Duct – 1 phase 3.1 General Specifications GENERAL INDOOR OUTDOOR
3. Product Characteristics Medium Static Pressure Duct – 1 phase 3.1 General Specifications GENERAL INDOOR OUTDOOR
3. Product Characteristics Medium Static Pressure Duct – 1 phase 3.1 General Specifications GENERAL INDOOR OUTDOOR
3. Product Characteristics Medium Static Pressure Duct – 3 phase 3.1 General Specifications GENERAL INDOOR OUTDOOR
3. Product Characteristics Medium Static Pressure Duct – 3 phase 3.1 General Specifications GENERAL INDOOR OUTDOOR
Heating 3. Product Characteristics 3.2 Operation Range • In cooling: +19°C / +46°C • In heating: -9°C / +18°C Cooling
3. Product Characteristics 3.3 Refrigerant Circuit Diagrams FDYB/M30C RY30CV1
3. Product Characteristics 3.3 Refrigerant Circuit Diagrams FDYB/M40C RY40CV1
3. Product Characteristics 3.3 Refrigerant Circuit Diagrams FDYB/M60C RY60CV1
3. Product Characteristics 3.3 Refrigerant Circuit Diagrams FDYB/M71C RY71CV1
3. Product Characteristics 3.3 Refrigerant Circuit Diagrams FDYM80C FDYB/M90C RY80CV1
3. Product Characteristics 3.3 Refrigerant Circuit Diagrams FDYM80C FDYB/M90C RY90CV/Y1 FDYM100C FDYB/M125C RY100CV1 RY125CV/Y1 FDYB/M140C RY140CY1
3. Product Characteristics 3.3 Refrigerant Circuit Diagrams FDYB/M160C RY160CY1
3. Product Characteristics 3.4 McQuay/Daikin Name Cross-over
An outdoor unit with a wide operation range (to +46°C in cooling and -9°C in heating), combinable with low / medium static indoors and available in 1 and 3 phase power supply versions. A product combination with a wide capacity range going from class 30 to 160 (2.7kW to 16.4kW) offering comfort living, greatest flexibility and easiness in installation locations, good COP/EER and static pressure. An indoor unit that is elegant, space saving (lowest height is 261mm), with 4 fan speeds and a well insulated casing to reduce noise level. Moreover it has a ‘Double Protection Drainage System’ to offer an additional protection to the ceiling and easy maintenance. 4. Conclusion With the introduction of the new Non-inverter (R22) Heat Pump RY-series in combination with the Low & Medium Static PressureDuct (FDYB/FDYM), Daikin extends its Sky Air product portfolio for R22 refrigerant and widens its choice for ceiling concealed applications in area’s using R22 units. Mainly the RY + FDYB/M series will provide: