390 likes | 498 Views
Master Plan Analyses. DA#6. X-dynamics update. The changes. 2-inputs/2-outputs system (IFO signals x 1 , x ) Multi parameter dynamical model. o i, 1. o 1. o i, . o . The effective dynamics. Basic dynamics. 2-body difference of force drives the two differential coordinates.
E N D
Master Plan Analyses DA#6 S. Vitale
X-dynamics update S. Vitale
The changes S. Vitale
2-inputs/2-outputs system (IFO signals x1, x) Multi parameter dynamical model oi,1 o1 oi, o The effective dynamics S. Vitale
Basic dynamics • 2-body difference of force drives the two differential coordinates. • Only two inputs are needed • Force on x1 can be applied either via oi1 (Thrusters) or via gx1 (Electrostatic) • If gx1=-Hdfoi1 formulas stay the same but cross-talk coefficient changes meaning. • Careful: to apply gx1 must increase stiffness. S. Vitale
Signal amplitude adjusted to compensate for gain and to avoid force saturation S. Vitale
Blue: x. Red: x1 S. Vitale
Real displacement S. Vitale
Results S. Vitale
Same approach: response linear in imperfections Imperfections unknown amplitudes to be extracted by Wiener-Kolmogorov (vectorial) theory Stimuli also applied as forces to distinguish actuation cross-talk y-x Cross-Talk S. Vitale
Starting point S. Vitale
Force input “Displacement” input Linearisation S. Vitale
Dynamics 2: y- nominal Acting on TM for S/C attitude TM attitude irrelevant to first order S. Vitale
Dynamics 2: Solving for S/C acceleration S. Vitale
Dynamics 3: x and imperfections • No inputs on x • No imperfections on x • Nominal response = 0 S. Vitale
Various Matrices S. Vitale
Dynamics and control imperfections S. Vitale
Signal and actuation imperfections S. Vitale
Two cases: Displacement command within drag-free loop Excites thrusters Probes thrusters cross-talk Electrostatic TM cross-talk only excited through very low frequency attitude control Force command on TM1 and TM2 Probes electrostatics Numerical Calculation S. Vitale
Acceleration noise on x axis. Noise cross-talk neglected Channel 1 (S/C-TM1) Channel (TM2-TM1) |Cross-spectrum| S. Vitale
Case 1: displacement excitation y1 y2 Force limited < 10 µN S. Vitale
Excitation S. Vitale
Response S. Vitale
Response, absolute attitude S. Vitale
Results (Preliminary): statistically independent combinations Signal cross-talk y-to- measured with high resolution If ifo sensitivity calibrated on ground, thruster cross-talk and cross-stiffness can be disentangled S. Vitale
Case 2: force excitation (<1µm displacement) y1 y2 S. Vitale
Force excitation S. Vitale
Displacement response S. Vitale
Results (preliminary): statistically independent imperfections Actuation cross-talk measured with high resolution Signal cross-talk y-to- also measured scaled for smaller excitation S. Vitale
Actuation cross-talk channel 1 S. Vitale
Actuation cross-talk channel S. Vitale
Signal cross-talk channel S. Vitale
Key element: converting data from displacement to acceleration Acceleration PSD S. Vitale
Time domain operation more transparent Double derivative required Non-casual filter preferred Currently in torsion pendulum: 2nd order fit to 5 points Getting the filter S. Vitale
Next steps Complete technical note Complete analysis for acceleration PSD Get the number for z -x cross-talk -x cross-talk More difficult -x cross-talk Planning S. Vitale